mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
a868598a48
Since we lack information about the DRAM initialization for the Allwinner A64 SoC, booting any A64 based board like the Pine64 is a bit involved at the moment. Add a README file to explain the process. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Move to board/sunxi/ from doc/] Signed-off-by: Tom Rini <trini@konsulko.com>
98 lines
4.6 KiB
Text
98 lines
4.6 KiB
Text
Pine64 board README
|
|
====================
|
|
|
|
The Pine64(+) is a single board computer equipped with an AArch64 capable ARMv8
|
|
compliant Allwinner A64 SoC.
|
|
This chip has ARM Cortex A-53 cores and thus can run both in AArch32
|
|
(compatible to 32-bit ARMv7) and AArch64 modes. Upon reset the SoC starts
|
|
in AArch32 mode and executes 32-bit code from the Boot ROM (BROM).
|
|
This has some implications on U-Boot.
|
|
|
|
Quick start
|
|
============
|
|
- Get hold of a boot0.img file (see below for more details).
|
|
- Get the boot0img tool source from the tools directory in [1] and compile
|
|
that on your host.
|
|
- Build U-Boot:
|
|
$ export CROSS_COMPILE=aarch64-linux-gnu-
|
|
$ make pine64_plus_defconfig
|
|
$ make
|
|
- You also need a compiled ARM Trusted Firmware (ATF) binary. Checkout the
|
|
"allwinner" branch from the github repository [2] and build it:
|
|
$ export CROSS_COMPILE=aarch64-linux-gnu-
|
|
$ make PLAT=sun50iw1p1 DEBUG=1 bl31
|
|
The resulting binary is build/sun50iw1p1/debug/bl31.bin.
|
|
|
|
Now put an empty (or disposable) micro SD card in your card reader and learn
|
|
its device file name, replacing /dev/sd<x> below with the result (that could
|
|
be /dev/mmcblk<x> as well):
|
|
|
|
$ ./boot0img --device /dev/sd<x> -e -u u-boot.bin -B boot0.img \
|
|
-d trampoline64:0x44000 -s bl31.bin -a 0x44008 -p 100
|
|
(either copying the respective files to the working directory or specifying
|
|
the paths directly)
|
|
|
|
This will create a new partition table (with a 100 MB FAT boot partition),
|
|
copies boot0.img, ATF and U-Boot to the proper locations on the SD card and
|
|
will fill in the magic Allwinner header to be recognized by boot0.
|
|
Prefix the above call with "sudo" if you don't have write access to the
|
|
uSD card. You can also use "-o output.img" instead of "--device /dev/sd<x>"
|
|
to create an image file and "dd" that to the uSD card.
|
|
Omitting the "-p" option will skip the partition table.
|
|
|
|
Now put this uSD card in the board and power it on. You should be greeted by
|
|
the U-Boot prompt.
|
|
|
|
|
|
Main U-Boot
|
|
============
|
|
The main U-Boot proper is a real 64-bit ARMv8 port and runs entirely in the
|
|
64-bit AArch64 mode. It can load any AArch64 code, EFI applications or arm64
|
|
Linux kernel images (often named "Image") using the booti command.
|
|
Launching 32-bit code and kernels is technically possible, though not without
|
|
drawbacks (or hacks to avoid them) and currently not implemented.
|
|
|
|
SPL support
|
|
============
|
|
The main task of the SPL support is to bring up the DRAM controller and make
|
|
DRAM actually accessible. At the moment there is no documentation or source
|
|
code available which would do this.
|
|
There are currently two ways to overcome this situation: using a tainted 32-bit
|
|
SPL (involving some hacks and resulting in a non-redistributable binary, thus
|
|
not described here) or using the Allwinner boot0 blob.
|
|
|
|
boot0 method
|
|
-------------
|
|
boot0 is Allwiner's secondary program loader and it can be used as some kind
|
|
of SPL replacement to get U-Boot up and running.
|
|
The binary is a 32 KByte blob and contained on every Pine64 image distributed
|
|
so far. It can be easily extracted from a micro SD card or an image file:
|
|
# dd if=/dev/sd<x> of=boot0.bin bs=8k skip=1 count=4
|
|
where /dev/sd<x> is the device name of the uSD card or the name of the image
|
|
file. Apparently Allwinner allows re-distribution of this proprietary code
|
|
as-is.
|
|
For the time being this boot0 blob is the only redistributable way of making
|
|
U-Boot work on the Pine64. Beside loading the various parts of the (original)
|
|
firmware it also switches the core into AArch64 mode.
|
|
The original boot0 code looks for U-Boot at a certain place on an uSD card
|
|
(at 19096 KB), also it expects a header with magic bytes and a checksum.
|
|
There is a tool called boot0img[1] which takes a boot0.bin image and a compiled
|
|
U-Boot binary (plus other binaries) and will populate that header accordingly.
|
|
To make space for the magic header, the pine64_plus_defconfig will make sure
|
|
there is sufficient space at the beginning of the U-Boot binary.
|
|
boot0img will also take care of putting the different binaries at the right
|
|
places on the uSD card and works around unused, but mandatory parts by using
|
|
trampoline code. See the output of "boot0img -h" for more information.
|
|
boot0img can also patch boot0 to avoid loading U-Boot from 19MB, instead
|
|
fetching it from just behind the boot0 binary (-B option).
|
|
|
|
FEL boot
|
|
=========
|
|
FEL is the name of the Allwinner defined USB boot protocol built-in the
|
|
mask ROM of most Allwinner SoCs. It allows to bootstrap a board solely
|
|
by using the USB-OTG interface and a host port on another computer.
|
|
Since FEL boot does not work with boot0, it requires the libdram hack, which
|
|
is not described here.
|
|
|
|
[1] https://github.com/apritzel/pine64/
|
|
[2] https://github.com/apritzel/arm-trusted-firmware.git
|