u-boot/board/xilinx/microblaze-generic/xparameters.h
Michal Simek 0f21f98dd4 watchdog: Add support for Xilinx Microblaze watchdog
Watchdog can be used on Microblaze, PPC and Zynq hw designs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-04-30 11:22:43 +02:00

83 lines
2.6 KiB
C

/*
* (C) Copyright 2007 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* CAUTION: This file is a faked configuration !!!
* There is no real target for the microblaze-generic
* configuration. You have to replace this file with
* the generated file from your Xilinx design flow.
*/
#define XILINX_BOARD_NAME microblaze-generic
/* System Clock Frequency */
#define XILINX_CLOCK_FREQ 100000000
/* Microblaze is microblaze_0 */
#define XILINX_USE_MSR_INSTR 1
#define XILINX_FSL_NUMBER 3
/* Interrupt controller is opb_intc_0 */
#define XILINX_INTC_BASEADDR 0x41200000
#define XILINX_INTC_NUM_INTR_INPUTS 6
/* Timer pheriphery is opb_timer_1 */
#define XILINX_TIMER_BASEADDR 0x41c00000
#define XILINX_TIMER_IRQ 0
/* Uart pheriphery is RS232_Uart */
#define XILINX_UARTLITE_BASEADDR 0x40600000
#define XILINX_UARTLITE_BAUDRATE 115200
/* IIC pheriphery is IIC_EEPROM */
#define XILINX_IIC_0_BASEADDR 0x40800000
#define XILINX_IIC_0_FREQ 100000
#define XILINX_IIC_0_BIT 0
/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR 0x40000000
/* Flash Memory is FLASH_2Mx32 */
#define XILINX_FLASH_START 0x2c000000
#define XILINX_FLASH_SIZE 0x00800000
/* Main Memory is DDR_SDRAM_64Mx32 */
#define XILINX_RAM_START 0x28000000
#define XILINX_RAM_SIZE 0x04000000
/* Sysace Controller is SysACE_CompactFlash */
#define XILINX_SYSACE_BASEADDR 0x41800000
#define XILINX_SYSACE_HIGHADDR 0x4180ffff
#define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */
#define XILINX_EMACLITE_BASEADDR 0x40C00000
/* LL_TEMAC Ethernet controller */
#define XILINX_LLTEMAC_BASEADDR 0x44000000
#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR 0x42000180
#define XILINX_LLTEMAC_BASEADDR1 0x44200000
#define XILINX_LLTEMAC_FIFO_BASEADDR1 0x42100000
/* Watchdog IP is wxi_timebase_wdt_0 */
#define XILINX_WATCHDOG_BASEADDR 0x50000000
#define XILINX_WATCHDOG_IRQ 1