u-boot/include/power/rk8xx_pmic.h
Wadim Egorov ad98f882e8 power: regulator: rk8xx: Allow input current/charger shutdown configuration
The RK818 PMIC contains a charger. Add very basic charger functionality
to be able to regulate the USB input current and charger shutdown limits.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11 15:23:38 +02:00

195 lines
3.3 KiB
C

/*
* Copyright (C) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _PMIC_RK8XX_H_
#define _PMIC_RK8XX_H_
enum {
REG_SECONDS = 0x00,
REG_MINUTES,
REG_HOURS,
REG_DAYS,
REG_MONTHS,
REG_YEARS,
REG_WEEKS,
REG_ALARM_SECONDS,
REG_ALARM_MINUTES,
REG_ALARM_HOURS,
REG_ALARM_DAYS,
REG_ALARM_MONTHS,
REG_ALARM_YEARS,
REG_RTC_CTRL = 0x10,
REG_RTC_STATUS,
REG_RTC_INT,
REG_RTC_COMP_LSB,
REG_RTC_COMP_MSB,
ID_MSB = 0x17,
ID_LSB,
REG_CLK32OUT = 0x20,
REG_VB_MON,
REG_THERMAL,
REG_DCDC_EN,
REG_LDO_EN,
REG_SLEEP_SET_OFF1,
REG_SLEEP_SET_OFF2,
REG_DCDC_UV_STS,
REG_DCDC_UV_ACT,
REG_LDO_UV_STS,
REG_LDO_UV_ACT,
REG_DCDC_PG,
REG_LDO_PG,
REG_VOUT_MON_TDB,
REG_BUCK1_CONFIG,
REG_BUCK1_ON_VSEL,
REG_BUCK1_SLP_VSEL,
REG_BUCK1_DVS_VSEL,
REG_BUCK2_CONFIG,
REG_BUCK2_ON_VSEL,
REG_BUCK2_SLP_VSEL,
REG_BUCK2_DVS_VSEL,
REG_BUCK3_CONFIG,
REG_BUCK4_CONFIG,
REG_BUCK4_ON_VSEL,
REG_BUCK4_SLP_VSEL,
REG_BOOST_CONFIG_REG,
REG_LDO1_ON_VSEL,
REG_LDO1_SLP_VSEL,
REG_LDO2_ON_VSEL,
REG_LDO2_SLP_VSEL,
REG_LDO3_ON_VSEL,
REG_LDO3_SLP_VSEL,
REG_LDO4_ON_VSEL,
REG_LDO4_SLP_VSEL,
REG_LDO5_ON_VSEL,
REG_LDO5_SLP_VSEL,
REG_LDO6_ON_VSEL,
REG_LDO6_SLP_VSEL,
REG_LDO7_ON_VSEL,
REG_LDO7_SLP_VSEL,
REG_LDO8_ON_VSEL,
REG_LDO8_SLP_VSEL,
REG_DEVCTRL,
REG_INT_STS1,
REG_INT_STS_MSK1,
REG_INT_STS2,
REG_INT_STS_MSK2,
REG_IO_POL,
REG_OTP_VDD_EN,
REG_H5V_EN,
REG_SLEEP_SET_OFF,
REG_BOOST_LDO9_ON_VSEL,
REG_BOOST_LDO9_SLP_VSEL,
REG_BOOST_CTRL,
/* Not sure what this does */
REG_DCDC_ILMAX = 0x90,
REG_CHRG_COMP = 0x9a,
REG_SUP_STS = 0xa0,
REG_USB_CTRL,
REG1_CHRG_CTRL,
REG2_CHRG_CTRL,
REG3_CHRG_CTRL,
REG_BAT_CTRL,
REG_BAT_HTS_TS1,
REG_BAT_LTS_TS1,
REG_BAT_HTS_TS2,
REG_BAT_LTS_TS2,
REG_TS_CTRL,
REG_ADC_CTRL,
REG_ON_SOURCE,
REG_OFF_SOURCE,
REG_GGCON,
REG_GGSTS,
REG_FRAME_SMP_INTERV,
REG_AUTO_SLP_CUR_THR,
REG3_GASCNT_CAL,
REG2_GASCNT_CAL,
REG1_GASCNT_CAL,
REG0_GASCNT_CAL,
REG3_GASCNT,
REG2_GASCNT,
REG1_GASCNT,
REG0_GASCNT,
REGH_BAT_CUR_AVG,
REGL_BAT_CUR_AVG,
REGH_TS1_ADC,
REGL_TS1_ADC,
REGH_TS2_ADC,
REGL_TS2_ADC,
REGH_BAT_OCV,
REGL_BAT_OCV,
REGH_BAT_VOL,
REGL_BAT_VOL,
REGH_RELAX_ENTRY_THRES,
REGL_RELAX_ENTRY_THRES,
REGH_RELAX_EXIT_THRES,
REGL_RELAX_EXIT_THRES,
REGH_RELAX_VOL1,
REGL_RELAX_VOL1,
REGH_RELAX_VOL2,
REGL_RELAX_VOL2,
REGH_BAT_CUR_R_CALC,
REGL_BAT_CUR_R_CALC,
REGH_BAT_VOL_R_CALC,
REGL_BAT_VOL_R_CALC,
REGH_CAL_OFFSET,
REGL_CAL_OFFSET,
REG_NON_ACT_TIMER_CNT,
REGH_VCALIB0,
REGL_VCALIB0,
REGH_VCALIB1,
REGL_VCALIB1,
REGH_IOFFSET,
REGL_IOFFSET,
REG_SOC,
REG3_REMAIN_CAP,
REG2_REMAIN_CAP,
REG1_REMAIN_CAP,
REG0_REMAIN_CAP,
REG_UPDAT_LEVE,
REG3_NEW_FCC,
REG2_NEW_FCC,
REG1_NEW_FCC,
REG0_NEW_FCC,
REG_NON_ACT_TIMER_CNT_SAVE,
REG_OCV_VOL_VALID,
REG_REBOOT_CNT,
REG_POFFSET,
REG_MISC_MARK,
REG_HALT_CNT,
REGH_CALC_REST,
REGL_CALC_REST,
SAVE_DATA19,
RK808_NUM_OF_REGS,
};
enum {
RK805_ID = 0x8050,
RK808_ID = 0x0000,
RK818_ID = 0x8180,
};
#define RK8XX_ID_MSK 0xfff0
struct rk8xx_reg_table {
char *name;
u8 reg_ctl;
u8 reg_vol;
};
struct rk8xx_priv {
int variant;
};
int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt);
int rk818_spl_configure_usb_input_current(struct udevice *pmic, int current_ma);
int rk818_spl_configure_usb_chrg_shutdown(struct udevice *pmic, int uvolt);
#endif