mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 03:53:31 +00:00
c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
279 lines
7.9 KiB
C
279 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2014 Freescale Semiconductor, Inc.
|
|
* Author: Nitin Garg <nitin.garg@freescale.com>
|
|
* Ye Li <Ye.Li@freescale.com>
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <div64.h>
|
|
#include <fuse.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/math64.h>
|
|
#include <thermal.h>
|
|
#include <imx_thermal.h>
|
|
|
|
/* board will busyloop until this many degrees C below CPU max temperature */
|
|
#define TEMPERATURE_HOT_DELTA 5 /* CPU maxT - 5C */
|
|
#define FACTOR0 10000000
|
|
#define FACTOR1 15423
|
|
#define FACTOR2 4148468
|
|
#define OFFSET 3580661
|
|
#define MEASURE_FREQ 327
|
|
#define TEMPERATURE_MIN -40
|
|
#define TEMPERATURE_HOT 85
|
|
#define TEMPERATURE_MAX 125
|
|
|
|
#define TEMPSENSE0_TEMP_CNT_SHIFT 8
|
|
#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
|
|
#define TEMPSENSE0_FINISHED (1 << 2)
|
|
#define TEMPSENSE0_MEASURE_TEMP (1 << 1)
|
|
#define TEMPSENSE0_POWER_DOWN (1 << 0)
|
|
#define MISC0_REFTOP_SELBIASOFF (1 << 3)
|
|
#define TEMPSENSE1_MEASURE_FREQ 0xffff
|
|
|
|
struct thermal_data {
|
|
unsigned int fuse;
|
|
int critical;
|
|
int minc;
|
|
int maxc;
|
|
};
|
|
|
|
#if defined(CONFIG_MX6)
|
|
static int read_cpu_temperature(struct udevice *dev)
|
|
{
|
|
int temperature;
|
|
unsigned int reg, n_meas;
|
|
const struct imx_thermal_plat *pdata = dev_get_plat(dev);
|
|
struct anatop_regs *anatop = (struct anatop_regs *)pdata->regs;
|
|
struct thermal_data *priv = dev_get_priv(dev);
|
|
u32 fuse = priv->fuse;
|
|
int t1, n1;
|
|
s64 c1, c2;
|
|
s64 temp64;
|
|
s32 rem;
|
|
|
|
/*
|
|
* Sensor data layout:
|
|
* [31:20] - sensor value @ 25C
|
|
* We use universal formula now and only need sensor value @ 25C
|
|
* slope = 0.4445388 - (0.0016549 * 25C fuse)
|
|
*/
|
|
n1 = fuse >> 20;
|
|
t1 = 25; /* t1 always 25C */
|
|
|
|
/*
|
|
* Derived from linear interpolation:
|
|
* slope = 0.4445388 - (0.0016549 * 25C fuse)
|
|
* slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
|
|
* offset = 3.580661
|
|
* offset = OFFSET / 1000000
|
|
* (Nmeas - n1) / (Tmeas - t1 - offset) = slope
|
|
* We want to reduce this down to the minimum computation necessary
|
|
* for each temperature read. Also, we want Tmeas in millicelsius
|
|
* and we don't want to lose precision from integer division. So...
|
|
* Tmeas = (Nmeas - n1) / slope + t1 + offset
|
|
* milli_Tmeas = 1000000 * (Nmeas - n1) / slope + 1000000 * t1 + OFFSET
|
|
* milli_Tmeas = -1000000 * (n1 - Nmeas) / slope + 1000000 * t1 + OFFSET
|
|
* Let constant c1 = (-1000000 / slope)
|
|
* milli_Tmeas = (n1 - Nmeas) * c1 + 1000000 * t1 + OFFSET
|
|
* Let constant c2 = n1 *c1 + 1000000 * t1
|
|
* milli_Tmeas = (c2 - Nmeas * c1) + OFFSET
|
|
* Tmeas = ((c2 - Nmeas * c1) + OFFSET) / 1000000
|
|
*/
|
|
temp64 = FACTOR0;
|
|
temp64 *= 1000000;
|
|
temp64 = div_s64_rem(temp64, FACTOR1 * n1 - FACTOR2, &rem);
|
|
c1 = temp64;
|
|
c2 = n1 * c1 + 1000000 * t1;
|
|
|
|
/*
|
|
* now we only use single measure, every time we read
|
|
* the temperature, we will power on/down anadig thermal
|
|
* module
|
|
*/
|
|
writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr);
|
|
writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
|
|
|
|
/* setup measure freq */
|
|
reg = readl(&anatop->tempsense1);
|
|
reg &= ~TEMPSENSE1_MEASURE_FREQ;
|
|
reg |= MEASURE_FREQ;
|
|
writel(reg, &anatop->tempsense1);
|
|
|
|
/* start the measurement process */
|
|
writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr);
|
|
writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
|
|
writel(TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set);
|
|
|
|
/* make sure that the latest temp is valid */
|
|
while ((readl(&anatop->tempsense0) &
|
|
TEMPSENSE0_FINISHED) == 0)
|
|
udelay(10000);
|
|
|
|
/* read temperature count */
|
|
reg = readl(&anatop->tempsense0);
|
|
n_meas = (reg & TEMPSENSE0_TEMP_CNT_MASK)
|
|
>> TEMPSENSE0_TEMP_CNT_SHIFT;
|
|
writel(TEMPSENSE0_FINISHED, &anatop->tempsense0_clr);
|
|
|
|
/* Tmeas = (c2 - Nmeas * c1 + OFFSET) / 1000000 */
|
|
temperature = div_s64_rem(c2 - n_meas * c1 + OFFSET, 1000000, &rem);
|
|
|
|
/* power down anatop thermal sensor */
|
|
writel(TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set);
|
|
writel(MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr);
|
|
|
|
return temperature;
|
|
}
|
|
#elif defined(CONFIG_MX7)
|
|
static int read_cpu_temperature(struct udevice *dev)
|
|
{
|
|
unsigned int reg, tmp;
|
|
unsigned int raw_25c, te1;
|
|
int temperature;
|
|
unsigned int *priv = dev_get_priv(dev);
|
|
u32 fuse = *priv;
|
|
struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
|
|
ANATOP_BASE_ADDR;
|
|
/*
|
|
* fuse data layout:
|
|
* [31:21] sensor value @ 25C
|
|
* [20:18] hot temperature value
|
|
* [17:9] sensor value of room
|
|
* [8:0] sensor value of hot
|
|
*/
|
|
|
|
raw_25c = fuse >> 21;
|
|
if (raw_25c == 0)
|
|
raw_25c = 25;
|
|
|
|
te1 = (fuse >> 9) & 0x1ff;
|
|
|
|
/*
|
|
* now we only use single measure, every time we read
|
|
* the temperature, we will power on/down anadig thermal
|
|
* module
|
|
*/
|
|
writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_clr);
|
|
writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_set);
|
|
|
|
/* write measure freq */
|
|
reg = readl(&ccm_anatop->tempsense1);
|
|
reg &= ~TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK;
|
|
reg |= TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ(MEASURE_FREQ);
|
|
writel(reg, &ccm_anatop->tempsense1);
|
|
|
|
writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_clr);
|
|
writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr);
|
|
writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_set);
|
|
|
|
if (soc_rev() >= CHIP_REV_1_1) {
|
|
while ((readl(&ccm_anatop->tempsense1) &
|
|
TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK) == 0)
|
|
;
|
|
reg = readl(&ccm_anatop->tempsense1);
|
|
tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
|
|
>> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT;
|
|
} else {
|
|
/*
|
|
* Since we can not rely on finish bit, use 10ms
|
|
* delay to get temperature. From RM, 17us is
|
|
* enough to get data, but to gurantee to get
|
|
* the data, delay 10ms here.
|
|
*/
|
|
udelay(10000);
|
|
reg = readl(&ccm_anatop->tempsense1);
|
|
tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK)
|
|
>> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT;
|
|
}
|
|
|
|
writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr);
|
|
|
|
/* power down anatop thermal sensor */
|
|
writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_set);
|
|
writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_clr);
|
|
|
|
/* Single point */
|
|
temperature = tmp - (te1 - raw_25c);
|
|
|
|
return temperature;
|
|
}
|
|
#endif
|
|
|
|
int imx_thermal_get_temp(struct udevice *dev, int *temp)
|
|
{
|
|
struct thermal_data *priv = dev_get_priv(dev);
|
|
int cpu_tmp = 0;
|
|
|
|
cpu_tmp = read_cpu_temperature(dev);
|
|
|
|
while (cpu_tmp >= priv->critical) {
|
|
printf("CPU Temperature (%dC) too close to max (%dC)",
|
|
cpu_tmp, priv->maxc);
|
|
puts(" waiting...\n");
|
|
udelay(5000000);
|
|
cpu_tmp = read_cpu_temperature(dev);
|
|
}
|
|
|
|
*temp = cpu_tmp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_thermal_ops imx_thermal_ops = {
|
|
.get_temp = imx_thermal_get_temp,
|
|
};
|
|
|
|
static int imx_thermal_probe(struct udevice *dev)
|
|
{
|
|
unsigned int fuse = ~0;
|
|
|
|
const struct imx_thermal_plat *pdata = dev_get_plat(dev);
|
|
struct thermal_data *priv = dev_get_priv(dev);
|
|
|
|
/* Read Temperature calibration data fuse */
|
|
fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse);
|
|
|
|
if (is_soc_type(MXC_SOC_MX6)) {
|
|
/* Check for valid fuse */
|
|
if (fuse == 0 || fuse == ~0) {
|
|
debug("CPU: Thermal invalid data, fuse: 0x%x\n",
|
|
fuse);
|
|
return -EPERM;
|
|
}
|
|
} else if (is_soc_type(MXC_SOC_MX7)) {
|
|
/* No Calibration data in FUSE? */
|
|
if ((fuse & 0x3ffff) == 0)
|
|
return -EPERM;
|
|
/* We do not support 105C TE2 */
|
|
if (((fuse & 0x1c0000) >> 18) == 0x6)
|
|
return -EPERM;
|
|
}
|
|
|
|
/* set critical cooling temp */
|
|
get_cpu_temp_grade(&priv->minc, &priv->maxc);
|
|
priv->critical = priv->maxc - TEMPERATURE_HOT_DELTA;
|
|
priv->fuse = fuse;
|
|
|
|
enable_thermal_clk();
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(imx_thermal) = {
|
|
.name = "imx_thermal",
|
|
.id = UCLASS_THERMAL,
|
|
.ops = &imx_thermal_ops,
|
|
.probe = imx_thermal_probe,
|
|
.priv_auto = sizeof(struct thermal_data),
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|