mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 12:03:39 +00:00
5b4225511e
Currently the legacy software i2c support is only used for a single bus. Remove all of the extra and unused support. Also update the README to not reference that, and finish removing some already badly auto-edited related text. Signed-off-by: Tom Rini <trini@konsulko.com>
440 lines
9.7 KiB
C
440 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
* Changes for multibus/multiadapter I2C support.
|
|
*
|
|
* (C) Copyright 2001, 2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* This has been changed substantially by Gerald Van Baren, Custom IDEAS,
|
|
* vanbaren@cideas.com. It was heavily influenced by LiMon, written by
|
|
* Neil Russell.
|
|
*
|
|
* NOTE: This driver should be converted to driver model before June 2017.
|
|
* Please see doc/driver-model/i2c-howto.rst for instructions.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#if defined(CONFIG_AT91FAMILY)
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
#ifdef CONFIG_ATMEL_LEGACY
|
|
#include <asm/arch/gpio.h>
|
|
#endif
|
|
#endif
|
|
#include <i2c.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/delay.h>
|
|
|
|
#if defined(CONFIG_SOFT_I2C_GPIO_SCL)
|
|
# include <asm/gpio.h>
|
|
|
|
# ifndef I2C_GPIO_SYNC
|
|
# define I2C_GPIO_SYNC
|
|
# endif
|
|
|
|
# ifndef I2C_INIT
|
|
# define I2C_INIT \
|
|
do { \
|
|
gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, "soft_i2c"); \
|
|
gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, "soft_i2c"); \
|
|
} while (0)
|
|
# endif
|
|
|
|
# ifndef I2C_ACTIVE
|
|
# define I2C_ACTIVE do { } while (0)
|
|
# endif
|
|
|
|
# ifndef I2C_TRISTATE
|
|
# define I2C_TRISTATE do { } while (0)
|
|
# endif
|
|
|
|
# ifndef I2C_READ
|
|
# define I2C_READ gpio_get_value(CONFIG_SOFT_I2C_GPIO_SDA)
|
|
# endif
|
|
|
|
# ifndef I2C_SDA
|
|
# define I2C_SDA(bit) \
|
|
do { \
|
|
if (bit) \
|
|
gpio_direction_input(CONFIG_SOFT_I2C_GPIO_SDA); \
|
|
else \
|
|
gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SDA, 0); \
|
|
I2C_GPIO_SYNC; \
|
|
} while (0)
|
|
# endif
|
|
|
|
# ifndef I2C_SCL
|
|
# define I2C_SCL(bit) \
|
|
do { \
|
|
gpio_direction_output(CONFIG_SOFT_I2C_GPIO_SCL, bit); \
|
|
I2C_GPIO_SYNC; \
|
|
} while (0)
|
|
# endif
|
|
|
|
# ifndef I2C_DELAY
|
|
# define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
|
|
# endif
|
|
|
|
#endif
|
|
|
|
/* #define DEBUG_I2C */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef I2C_SOFT_DECLARATIONS
|
|
# define I2C_SOFT_DECLARATIONS
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SYS_I2C_SOFT_SPEED)
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
|
|
#endif
|
|
#if !defined(CONFIG_SYS_I2C_SOFT_SLAVE)
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions
|
|
*/
|
|
#define RETRIES 0
|
|
|
|
#define I2C_ACK 0 /* PD_SDA level to ack a byte */
|
|
#define I2C_NOACK 1 /* PD_SDA level to noack a byte */
|
|
|
|
|
|
#ifdef DEBUG_I2C
|
|
#define PRINTD(fmt,args...) do { \
|
|
printf (fmt ,##args); \
|
|
} while (0)
|
|
#else
|
|
#define PRINTD(fmt,args...)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Local functions
|
|
*/
|
|
#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
|
|
static void send_reset (void);
|
|
#endif
|
|
static void send_start (void);
|
|
static void send_stop (void);
|
|
static void send_ack (int);
|
|
static int write_byte (uchar byte);
|
|
static uchar read_byte (int);
|
|
|
|
#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
|
|
/*-----------------------------------------------------------------------
|
|
* Send a reset sequence consisting of 9 clocks with the data signal high
|
|
* to clock any confused device back into an idle state. Also send a
|
|
* <stop> at the end of the sequence for belts & suspenders.
|
|
*/
|
|
static void send_reset(void)
|
|
{
|
|
I2C_SOFT_DECLARATIONS /* intentional without ';' */
|
|
int j;
|
|
|
|
I2C_SCL(1);
|
|
I2C_SDA(1);
|
|
#ifdef I2C_INIT
|
|
I2C_INIT;
|
|
#endif
|
|
I2C_TRISTATE;
|
|
for(j = 0; j < 9; j++) {
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
I2C_DELAY;
|
|
}
|
|
send_stop();
|
|
I2C_TRISTATE;
|
|
}
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* START: High -> Low on SDA while SCL is High
|
|
*/
|
|
static void send_start(void)
|
|
{
|
|
I2C_SOFT_DECLARATIONS /* intentional without ';' */
|
|
|
|
I2C_DELAY;
|
|
I2C_SDA(1);
|
|
I2C_ACTIVE;
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
I2C_SDA(0);
|
|
I2C_DELAY;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* STOP: Low -> High on SDA while SCL is High
|
|
*/
|
|
static void send_stop(void)
|
|
{
|
|
I2C_SOFT_DECLARATIONS /* intentional without ';' */
|
|
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_SDA(0);
|
|
I2C_ACTIVE;
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
I2C_SDA(1);
|
|
I2C_DELAY;
|
|
I2C_TRISTATE;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* ack should be I2C_ACK or I2C_NOACK
|
|
*/
|
|
static void send_ack(int ack)
|
|
{
|
|
I2C_SOFT_DECLARATIONS /* intentional without ';' */
|
|
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_ACTIVE;
|
|
I2C_SDA(ack);
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
I2C_DELAY;
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Send 8 bits and look for an acknowledgement.
|
|
*/
|
|
static int write_byte(uchar data)
|
|
{
|
|
I2C_SOFT_DECLARATIONS /* intentional without ';' */
|
|
int j;
|
|
int nack;
|
|
|
|
I2C_ACTIVE;
|
|
for(j = 0; j < 8; j++) {
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_SDA(data & 0x80);
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
I2C_DELAY;
|
|
|
|
data <<= 1;
|
|
}
|
|
|
|
/*
|
|
* Look for an <ACK>(negative logic) and return it.
|
|
*/
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_SDA(1);
|
|
I2C_TRISTATE;
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
I2C_DELAY;
|
|
nack = I2C_READ;
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_ACTIVE;
|
|
|
|
return(nack); /* not a nack is an ack */
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* if ack == I2C_ACK, ACK the byte so can continue reading, else
|
|
* send I2C_NOACK to end the read.
|
|
*/
|
|
static uchar read_byte(int ack)
|
|
{
|
|
I2C_SOFT_DECLARATIONS /* intentional without ';' */
|
|
int data;
|
|
int j;
|
|
|
|
/*
|
|
* Read 8 bits, MSB first.
|
|
*/
|
|
I2C_TRISTATE;
|
|
I2C_SDA(1);
|
|
data = 0;
|
|
for(j = 0; j < 8; j++) {
|
|
I2C_SCL(0);
|
|
I2C_DELAY;
|
|
I2C_SCL(1);
|
|
I2C_DELAY;
|
|
data <<= 1;
|
|
data |= I2C_READ;
|
|
I2C_DELAY;
|
|
}
|
|
send_ack(ack);
|
|
|
|
return(data);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Initialization
|
|
*/
|
|
static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
|
|
{
|
|
#if defined(CONFIG_SYS_I2C_INIT_BOARD)
|
|
/* call board specific i2c bus reset routine before accessing the */
|
|
/* environment, which might be in a chip on that bus. For details */
|
|
/* about this problem see doc/I2C_Edge_Conditions. */
|
|
i2c_init_board();
|
|
#else
|
|
/*
|
|
* WARNING: Do NOT save speed in a static variable: if the
|
|
* I2C routines are called before RAM is initialized (to read
|
|
* the DIMM SPD, for instance), RAM won't be usable and your
|
|
* system will crash.
|
|
*/
|
|
send_reset ();
|
|
#endif
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Probe to see if a chip is present. Also good for checking for the
|
|
* completion of EEPROM writes since the chip stops responding until
|
|
* the write completes (typically 10mSec).
|
|
*/
|
|
static int soft_i2c_probe(struct i2c_adapter *adap, uint8_t addr)
|
|
{
|
|
int rc;
|
|
|
|
/*
|
|
* perform 1 byte write transaction with just address byte
|
|
* (fake write)
|
|
*/
|
|
send_start();
|
|
rc = write_byte ((addr << 1) | 0);
|
|
send_stop();
|
|
|
|
return (rc ? 1 : 0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Read bytes
|
|
*/
|
|
static int soft_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
|
|
int alen, uchar *buffer, int len)
|
|
{
|
|
int shift;
|
|
PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
|
|
chip, addr, alen, buffer, len);
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
|
|
/*
|
|
* EEPROM chips that implement "address overflow" are ones
|
|
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
|
|
* address and the extra bits end up in the "chip address"
|
|
* bit slots. This makes a 24WC08 (1Kbyte) chip look like
|
|
* four 256 byte chips.
|
|
*
|
|
* Note that we consider the length of the address field to
|
|
* still be one byte because the extra address bits are
|
|
* hidden in the chip address.
|
|
*/
|
|
chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
|
|
|
|
PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
|
|
chip, addr);
|
|
#endif
|
|
|
|
/*
|
|
* Do the addressing portion of a write cycle to set the
|
|
* chip's address pointer. If the address length is zero,
|
|
* don't do the normal write cycle to set the address pointer,
|
|
* there is no address pointer in this chip.
|
|
*/
|
|
send_start();
|
|
if(alen > 0) {
|
|
if(write_byte(chip << 1)) { /* write cycle */
|
|
send_stop();
|
|
PRINTD("i2c_read, no chip responded %02X\n", chip);
|
|
return(1);
|
|
}
|
|
shift = (alen-1) * 8;
|
|
while(alen-- > 0) {
|
|
if(write_byte(addr >> shift)) {
|
|
PRINTD("i2c_read, address not <ACK>ed\n");
|
|
return(1);
|
|
}
|
|
shift -= 8;
|
|
}
|
|
|
|
/* Some I2C chips need a stop/start sequence here,
|
|
* other chips don't work with a full stop and need
|
|
* only a start. Default behaviour is to send the
|
|
* stop/start sequence.
|
|
*/
|
|
#ifdef CONFIG_SOFT_I2C_READ_REPEATED_START
|
|
send_start();
|
|
#else
|
|
send_stop();
|
|
send_start();
|
|
#endif
|
|
}
|
|
/*
|
|
* Send the chip address again, this time for a read cycle.
|
|
* Then read the data. On the last byte, we do a NACK instead
|
|
* of an ACK(len == 0) to terminate the read.
|
|
*/
|
|
write_byte((chip << 1) | 1); /* read cycle */
|
|
while(len-- > 0) {
|
|
*buffer++ = read_byte(len == 0);
|
|
}
|
|
send_stop();
|
|
return(0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write bytes
|
|
*/
|
|
static int soft_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
|
|
int alen, uchar *buffer, int len)
|
|
{
|
|
int shift, failures = 0;
|
|
|
|
PRINTD("i2c_write: chip %02X addr %02X alen %d buffer %p len %d\n",
|
|
chip, addr, alen, buffer, len);
|
|
|
|
send_start();
|
|
if(write_byte(chip << 1)) { /* write cycle */
|
|
send_stop();
|
|
PRINTD("i2c_write, no chip responded %02X\n", chip);
|
|
return(1);
|
|
}
|
|
shift = (alen-1) * 8;
|
|
while(alen-- > 0) {
|
|
if(write_byte(addr >> shift)) {
|
|
PRINTD("i2c_write, address not <ACK>ed\n");
|
|
return(1);
|
|
}
|
|
shift -= 8;
|
|
}
|
|
|
|
while(len-- > 0) {
|
|
if(write_byte(*buffer++)) {
|
|
failures++;
|
|
}
|
|
}
|
|
send_stop();
|
|
return(failures);
|
|
}
|
|
|
|
/*
|
|
* Register soft i2c adapters
|
|
*/
|
|
U_BOOT_I2C_ADAP_COMPLETE(soft00, soft_i2c_init, soft_i2c_probe,
|
|
soft_i2c_read, soft_i2c_write, NULL,
|
|
CONFIG_SYS_I2C_SOFT_SPEED, CONFIG_SYS_I2C_SOFT_SLAVE,
|
|
0)
|