mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
7f0aa48d86
We already have a clock driver for MIPS Octeon. This patch changes the Octeon DT nodes to supply the clock property via the clock driver instead of using an hard-coded value, which is not correct in all cases. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
271 lines
7.2 KiB
Text
271 lines
7.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Marvell / Cavium Inc. CN73xx
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/octeon-clock.h>
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
soc0: soc@0 {
|
|
interrupt-parent = <&ciu3>;
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges; /* Direct mapping */
|
|
|
|
ciu3: interrupt-controller@1010000000000 {
|
|
compatible = "cavium,octeon-7890-ciu3";
|
|
interrupt-controller;
|
|
/*
|
|
* Interrupts are specified by two parts:
|
|
* 1) Source number (20 significant bits)
|
|
* 2) Trigger type: (4 == level, 1 == edge)
|
|
*/
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x10100 0x00000000 0x0 0xb0000000>;
|
|
};
|
|
|
|
bootbus: bootbus@1180000000000 {
|
|
compatible = "cavium,octeon-3860-bootbus","simple-bus";
|
|
reg = <0x11800 0x00000000 0x0 0x200>;
|
|
/* The chip select number and offset */
|
|
#address-cells = <2>;
|
|
/* The size of the chip select region */
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
clk: clock {
|
|
compatible = "mrvl,octeon-clk";
|
|
#clock-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
gpio: gpio-controller@1070000000800 {
|
|
#gpio-cells = <2>;
|
|
compatible = "cavium,octeon-7890-gpio";
|
|
reg = <0x10700 0x00000800 0x0 0x100>;
|
|
gpio-controller;
|
|
nr-gpios = <32>;
|
|
/* Interrupts are specified by two parts:
|
|
* 1) GPIO pin number (0..15)
|
|
* 2) Triggering (1 - edge rising
|
|
* 2 - edge falling
|
|
* 4 - level active high
|
|
* 8 - level active low)
|
|
*/
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
/* The GPIO pins connect to 16 consecutive CUI bits */
|
|
interrupts = <0x03000 4>, <0x03001 4>,
|
|
<0x03002 4>, <0x03003 4>,
|
|
<0x03004 4>, <0x03005 4>,
|
|
<0x03006 4>, <0x03007 4>,
|
|
<0x03008 4>, <0x03009 4>,
|
|
<0x0300a 4>, <0x0300b 4>,
|
|
<0x0300c 4>, <0x0300d 4>,
|
|
<0x0300e 4>, <0x0300f 4>;
|
|
};
|
|
|
|
l2c: l2c@1180080000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "cavium,octeon-7xxx-l2c";
|
|
reg = <0x11800 0x80000000 0x0 0x01000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
lmc: lmc@1180088000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "cavium,octeon-7xxx-ddr4";
|
|
reg = <0x11800 0x88000000 0x0 0x02000000>; // 2 IFs
|
|
u-boot,dm-pre-reloc;
|
|
l2c-handle = <&l2c>;
|
|
};
|
|
|
|
reset: reset@1180006001600 {
|
|
compatible = "mrvl,cn7xxx-rst";
|
|
reg = <0x11800 0x06001600 0x0 0x200>;
|
|
};
|
|
|
|
uart0: serial@1180000000800 {
|
|
compatible = "cavium,octeon-3860-uart","ns16550";
|
|
reg = <0x11800 0x00000800 0x0 0x400>;
|
|
clocks = <&clk OCTEON_CLK_IO>;
|
|
clock-frequency = <0>;
|
|
current-speed = <115200>;
|
|
reg-shift = <3>;
|
|
interrupts = <0x08000 4>;
|
|
};
|
|
|
|
uart1: serial@1180000000c00 {
|
|
compatible = "cavium,octeon-3860-uart","ns16550";
|
|
reg = <0x11800 0x00000c00 0x0 0x400>;
|
|
clocks = <&clk OCTEON_CLK_IO>;
|
|
clock-frequency = <0>;
|
|
current-speed = <115200>;
|
|
reg-shift = <3>;
|
|
interrupts = <0x08040 4>;
|
|
};
|
|
|
|
i2c0: i2c@1180000001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "cavium,octeon-7890-twsi";
|
|
reg = <0x11800 0x00001000 0x0 0x200>;
|
|
/* INT_ST, INT_TS, INT_CORE */
|
|
interrupts = <0x0b000 1>, <0x0b001 1>, <0x0b002 1>;
|
|
clock-frequency = <100000>;
|
|
clocks = <&clk OCTEON_CLK_IO>;
|
|
};
|
|
|
|
i2c1: i2c@1180000001200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "cavium,octeon-7890-twsi";
|
|
reg = <0x11800 0x00001200 0x0 0x200>;
|
|
/* INT_ST, INT_TS, INT_CORE */
|
|
interrupts = <0x0b100 1>, <0x0b101 1>, <0x0b102 1>;
|
|
clock-frequency = <100000>;
|
|
clocks = <&clk OCTEON_CLK_IO>;
|
|
};
|
|
|
|
mmc: mmc@1180000002000 {
|
|
compatible = "cavium,octeon-7890-mmc",
|
|
"cavium,octeon-7360-mmc";
|
|
reg = <0x11800 0x00000000 0x0 0x2100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* EMM_INT_BUF_DONE,
|
|
EMM_INT_CMD_DONE,
|
|
EMM_INT_DMA_DONE,
|
|
EMM_INT_CMD_ERR,
|
|
EMM_INT_DMA_ERR,
|
|
EMM_INT_SWITCH_DONE,
|
|
EMM_INT_SWITCH_ERR,
|
|
EMM_DMA_DONE,
|
|
EMM_DMA_FIFO*/
|
|
interrupts = <0x09040 1>,
|
|
<0x09041 1>,
|
|
<0x09042 1>,
|
|
<0x09043 1>,
|
|
<0x09044 1>,
|
|
<0x09045 1>,
|
|
<0x09046 1>,
|
|
<0x09000 1>,
|
|
<0x09001 1>;
|
|
clocks = <&clk OCTEON_CLK_IO>;
|
|
};
|
|
|
|
spi: spi@1070000001000 {
|
|
compatible = "cavium,octeon-3010-spi";
|
|
reg = <0x10700 0x00001000 0x0 0x100>;
|
|
interrupts = <0x05001 1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
spi-max-frequency = <25000000>;
|
|
clocks = <&clk OCTEON_CLK_IO>;
|
|
};
|
|
|
|
/* USB 0 */
|
|
usb0: uctl@1180068000000 {
|
|
compatible = "cavium,octeon-7130-usb-uctl";
|
|
reg = <0x11800 0x68000000 0x0 0x100>;
|
|
ranges; /* Direct mapping */
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
/* Only 100MHz allowed */
|
|
refclk-frequency = <100000000>;
|
|
/* Only "dlmc_ref_clk0" is supported for 73xx */
|
|
refclk-type-ss = "dlmc_ref_clk0";
|
|
/* Only "dlmc_ref_clk0" is supported for 73xx */
|
|
refclk-type-hs = "dlmc_ref_clk0";
|
|
|
|
/*
|
|
* Power is specified by three parts:
|
|
* 1) GPIO handle (must be &gpio)
|
|
* 2) GPIO pin number
|
|
* 3) Active high (0) or active low (1)
|
|
*/
|
|
xhci@1680000000000 {
|
|
compatible = "cavium,octeon-7130-xhci","synopsys,dwc3","snps,dwc3";
|
|
reg = <0x16800 0x00000000 0x10 0x0>;
|
|
interrupts = <0x68080 4>; /* UAHC_IMAN, level */
|
|
maximum-speed = "super-speed";
|
|
dr_mode = "host";
|
|
snps,dis_u3_susphy_quirk;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_enblslpm_quirk;
|
|
};
|
|
};
|
|
|
|
/* USB 1 */
|
|
usb1: uctl@1180069000000 {
|
|
compatible = "cavium,octeon-7130-usb-uctl";
|
|
reg = <0x11800 0x69000000 0x0 0x100>;
|
|
ranges; /* Direct mapping */
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
/* 50MHz, 100MHz and 125MHz allowed */
|
|
refclk-frequency = <100000000>;
|
|
/* Either "dlmc_ref_clk0" or "dlmc_ref_clk0" */
|
|
refclk-type-ss = "dlmc_ref_clk0";
|
|
/* Either "dlmc_ref_clk0" "dlmc_ref_clk1" or "pll_ref_clk" */
|
|
refclk-type-hs = "dlmc_ref_clk0";
|
|
|
|
/*
|
|
* Power is specified by three parts:
|
|
* 1) GPIO handle (must be &gpio)
|
|
* 2) GPIO pin number
|
|
* 3) Active high (0) or active low (1)
|
|
*/
|
|
xhci@1690000000000 {
|
|
compatible = "cavium,octeon-7130-xhci","synopsys,dwc3","snps,dwc3";
|
|
reg = <0x16900 0x00000000 0x10 0x0>;
|
|
interrupts = <0x69080 4>; /* UAHC_IMAN, level */
|
|
dr_mode = "host";
|
|
};
|
|
};
|
|
|
|
/* PCIe 0 */
|
|
pcie0: pcie@1180069000000 {
|
|
compatible = "marvell,pcie-host-octeon";
|
|
reg = <0 0xf2600000 0 0x10000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
|
|
bus-range = <0 0xff>;
|
|
marvell,pcie-port = <0>;
|
|
ranges = <0x81000000 0x00000000 0xd0000000 0x00011a00 0xd0000000 0x00000000 0x01000000 /* IO */
|
|
0x02000000 0x00000000 0xe0000000 0x00011b00 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */
|
|
0x43000000 0x00011c00 0x00000000 0x00011c00 0x00000000 0x00000010 0x00000000>;/* prefetchable memory */
|
|
};
|
|
|
|
uctl@118006c000000 {
|
|
compatible = "cavium,octeon-7130-sata-uctl", "simple-bus";
|
|
reg = <0x11800 0x6c000000 0x0 0x100>;
|
|
ranges; /* Direct mapping */
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
portmap = <0x3>;
|
|
staggered-spinup;
|
|
cavium,qlm-trim = "4,sata";
|
|
|
|
sata: sata@16c0000000000 {
|
|
compatible = "cavium,octeon-7130-ahci";
|
|
reg = <0x16c00 0x00000000 0x0 0x200>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupts = <0x6c010 4>;
|
|
};
|
|
};
|
|
};
|
|
};
|