mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
ff94c15a3c
The previous version of am335x-fb.c contained the functionalities of two drivers that this patch has split. It was a video type driver that used the same registration compatible string that now registers a panel type driver. The proof of this is that two compatible strings were referred to within the same driver. There are now two drivers, each with its own compatible string, functions and API. Furthermore, the panel driver, in addition to decoding the display timings, is now also able to manage the backlight. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
374 lines
6.1 KiB
Text
374 lines
6.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 B&R Industrial Automation GmbH
|
|
* http://www.br-automation.com
|
|
*
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
|
|
/ {
|
|
model = "BRPPT1 (NAND) Panel";
|
|
compatible = "ti,am33xx";
|
|
|
|
fset: factory-settings {
|
|
bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
|
version = <0x0100>;
|
|
order-no = "6PPT30 (NAND)";
|
|
hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
|
|
serial-no = "0";
|
|
device-id = <0x0>;
|
|
parent-id = <0x0>;
|
|
hw-variant = <0x1>;
|
|
};
|
|
|
|
aliases {
|
|
ds1bkl0 = &pwmbacklight;
|
|
ds1bkl1 = &tps_bl;
|
|
ds1timing = &timing0;
|
|
ds1ctrl = &lcdc;
|
|
gpmc = &gpmc;
|
|
mmc = &mmc2;
|
|
fset = &fset;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyO0,115200 earlyprintk";
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
panel {
|
|
status = "disabled";
|
|
|
|
compatible = "ti,tilcdc,panel";
|
|
enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
|
|
backlight = <&pwmbacklight>;
|
|
bkl-pwm = <&pwmbacklight>;
|
|
bkl-tps = <&tps_bl>;
|
|
|
|
panel-info {
|
|
ac-bias = <255>;
|
|
ac-bias-intrpt = <0>;
|
|
dma-burst-sz = <16>;
|
|
bpp = <32>;
|
|
fdd = <0x80>;
|
|
sync-edge = <0>;
|
|
sync-ctrl = <1>;
|
|
raster-order = <0>;
|
|
fifo-th = <0>;
|
|
};
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: lcd {
|
|
clock-frequency = <32000000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hfront-porch = <2>;
|
|
hback-porch = <192>;
|
|
hsync-len = <1>;
|
|
vfront-porch = <20>;
|
|
vback-porch = <2>;
|
|
vsync-len = <1>;
|
|
hsync-active = <1>;
|
|
vsync-active = <1>;
|
|
pupdelay = <10>;
|
|
pondelay = <10>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vmmcsd_fixed: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
pwm0: omap-pwm@timer5 {
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
ti,timers = <&timer5>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
|
|
pwm1: omap-pwm@timer6 {
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
ti,timers = <&timer6>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
|
|
beeper: pwm-beep {
|
|
compatible = "pwm-beeper";
|
|
pwms = <&pwm0 0 0 0>;
|
|
};
|
|
|
|
pwmbacklight: pwm-bkl {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000 0>;
|
|
|
|
default-brightness-level = <255>;
|
|
brightness-levels = <0 16 32 64 128 170 202 234 255>;
|
|
|
|
power-supply = <&vmmcsd_fixed>;
|
|
enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&uart0 { /* console uart */
|
|
u-boot,dm-spl;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
u-boot,dm-spl;
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps: tps@24 { /* PMIC controller */
|
|
u-boot,dm-spl;
|
|
reg = <0x24>;
|
|
compatible = "ti,tps65217";
|
|
|
|
tps_bl: backlight {
|
|
compatible = "ti,tps65217-bl";
|
|
isel = <1>; /* 1 - ISET1, 2 ISET2 */
|
|
fdim = <1000>; /* TPS65217_BL_FDIM_1kHZ */
|
|
default-brightness = <50>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&edma {
|
|
status = "okay";
|
|
};
|
|
|
|
&cppi41dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_ctrl_mod {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
dual_emac;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy-handle = <&phy0>;
|
|
dual_emac_res_vlan = <1>;
|
|
phy-mode = "mii";
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy-handle = <&phy1>;
|
|
dual_emac_res_vlan = <2>;
|
|
phy-mode = "mii";
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
bus-width = <0x4>;
|
|
ti,non-removable;
|
|
ti,needs-special-hs-handling;
|
|
ti,vcc-aux-disable-is-sleep;
|
|
status = "disabled";
|
|
};
|
|
|
|
&l4_per {
|
|
|
|
segment@300000 {
|
|
|
|
target-module@e000 {
|
|
u-boot,dm-pre-reloc;
|
|
|
|
lcdc: lcdc@0 {
|
|
u-boot,dm-pre-reloc;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&sham {
|
|
status = "okay";
|
|
};
|
|
|
|
&aes {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio0 {
|
|
u-boot,dm-spl;
|
|
ti,no-reset-on-init;
|
|
};
|
|
|
|
&gpio1 {
|
|
u-boot,dm-spl;
|
|
ti,no-reset-on-init;
|
|
};
|
|
|
|
&gpio2 {
|
|
u-boot,dm-spl;
|
|
ti,no-reset-on-init;
|
|
};
|
|
|
|
&gpio3 {
|
|
u-boot,dm-spl;
|
|
ti,no-reset-on-init;
|
|
};
|
|
|
|
&wdt2 {
|
|
ti,no-reset-on-init;
|
|
ti,no-idle-on-init;
|
|
};
|
|
|
|
&tscadc {
|
|
status = "okay";
|
|
tsc {
|
|
ti,wires = <4>;
|
|
ti,x-plate-resistance = <200>;
|
|
ti,zx-cutoff-ratio = <40>;
|
|
ti,min_deviation = <60>;
|
|
ti,max_deviation = <600>;
|
|
ti,coordinate-readouts = <5>;
|
|
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
|
|
|
bnr-buttons {
|
|
Home-Button {};
|
|
};
|
|
};
|
|
|
|
adc {
|
|
ti,adc-channels = <5 6 7>;
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
u-boot,dm-spl;
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
rb-gpios = <&gpmc 1 GPIO_ACTIVE_HIGH>; /* gpmc_wait1 */
|
|
ti,nand-ecc-opt = "bch8";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <8>;
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-on-ns = <0>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wait-on-read = "true";
|
|
gpmc,wait-on-write = "true";
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
gpmc,wait-pin = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "NAND.MLO";
|
|
reg = <0x00000000 0x000020000>;
|
|
};
|
|
partition@1 {
|
|
label = "NAND.cfgscr";
|
|
reg = <0x00020000 0x00020000>;
|
|
};
|
|
partition@2 {
|
|
label = "NAND.dtb";
|
|
reg = <0x00040000 0x00020000>;
|
|
};
|
|
partition@3 {
|
|
label = "NAND.u-boot-env";
|
|
reg = <0x00060000 0x00020000>;
|
|
};
|
|
partition@4 {
|
|
label = "NAND.u-boot";
|
|
reg = <0x00080000 0x00080000>;
|
|
};
|
|
partition@5 {
|
|
label = "NAND.kernel";
|
|
reg = <0x00100000 0x00400000>;
|
|
};
|
|
partition@6 {
|
|
label = "NAND.rootfs";
|
|
reg = <0x00500000 0x08000000>;
|
|
};
|
|
partition@7 {
|
|
label = "NAND.user";
|
|
reg = <0x08500000 0x17b00000>;
|
|
};
|
|
};
|
|
};
|