u-boot/arch/arm/mach-zynq/cpu.c
Michal Simek 29bd8ada52 fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA
The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile
and zynqmp.c to simplify if/endif logic in zynqmp.c.

This change is mostly done to be able to use CONFIG_IS_ENABLED macro and
obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync.

And removing one line from Topic Miami boards which is not needed because
symbol is not enabled via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-23 10:31:41 +02:00

145 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2012 Xilinx, Inc. All rights reserved.
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <zynqpl.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include <asm/arch/ps7_init_gpl.h>
#include <asm/arch/sys_proto.h>
#define ZYNQ_SILICON_VER_MASK 0xF0000000
#define ZYNQ_SILICON_VER_SHIFT 28
#if CONFIG_IS_ENABLED(FPGA)
xilinx_desc fpga = {
.family = xilinx_zynq,
.iface = devcfg,
.operations = &zynq_op,
};
#endif
static const struct {
u8 idcode;
#if defined(CONFIG_FPGA)
u32 fpga_size;
#endif
char *devicename;
} zynq_fpga_descs[] = {
ZYNQ_DESC(7Z007S),
ZYNQ_DESC(7Z010),
ZYNQ_DESC(7Z012S),
ZYNQ_DESC(7Z014S),
ZYNQ_DESC(7Z015),
ZYNQ_DESC(7Z020),
ZYNQ_DESC(7Z030),
ZYNQ_DESC(7Z035),
ZYNQ_DESC(7Z045),
ZYNQ_DESC(7Z100),
{ /* Sentinel */ },
};
int arch_cpu_init(void)
{
zynq_slcr_unlock();
#ifndef CONFIG_SPL_BUILD
/* Device config APB, unlock the PCAP */
writel(0x757BDF0D, &devcfg_base->unlock);
writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
#if (CONFIG_SYS_SDRAM_BASE == 0)
/* remap DDR to zero, FILTERSTART */
writel(0, &scu_base->filter_start);
/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
writel(0x1F, &slcr_base->ocm_cfg);
/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
writel(0x0, &slcr_base->fpga_rst_ctrl);
/* Set urgent bits with register */
writel(0x0, &slcr_base->ddr_urgent_sel);
/* Urgent write, ports S2/S3 */
writel(0xC, &slcr_base->ddr_urgent);
#endif
#endif
zynq_slcr_lock();
return 0;
}
unsigned int zynq_get_silicon_version(void)
{
return (readl(&devcfg_base->mctrl) & ZYNQ_SILICON_VER_MASK)
>> ZYNQ_SILICON_VER_SHIFT;
}
void reset_cpu(ulong addr)
{
zynq_slcr_cpu_reset();
while (1)
;
}
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
static int __maybe_unused cpu_desc_id(void)
{
u32 idcode;
u8 i;
idcode = zynq_slcr_get_idcode();
for (i = 0; zynq_fpga_descs[i].idcode; i++) {
if (zynq_fpga_descs[i].idcode == idcode)
return i;
}
return -ENODEV;
}
#if defined(CONFIG_ARCH_EARLY_INIT_R)
int arch_early_init_r(void)
{
#if CONFIG_IS_ENABLED(FPGA)
int cpu_id = cpu_desc_id();
if (cpu_id < 0)
return 0;
fpga.size = zynq_fpga_descs[cpu_id].fpga_size;
fpga.name = zynq_fpga_descs[cpu_id].devicename;
fpga_init();
fpga_add(fpga_xilinx, &fpga);
#endif
return 0;
}
#endif
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
u32 version;
int cpu_id = cpu_desc_id();
if (cpu_id < 0)
return 0;
version = zynq_get_silicon_version() << 1;
if (version > (PCW_SILICON_VERSION_3 << 1))
version += 1;
printf("CPU: Zynq %s\n", zynq_fpga_descs[cpu_id].devicename);
printf("Silicon: v%d.%d\n", version >> 1, version & 1);
return 0;
}
#endif