u-boot/board/ti/omap2420h4/sys_info.c
Jean-Christophe PLAGNIOL-VILLARD 0a0e4bad96 omap: move TI's boards to board/ti/
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-09-05 01:33:09 +02:00

387 lines
11 KiB
C

/*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/omap2420.h>
#include <asm/io.h>
#include <asm/arch/bits.h>
#include <asm/arch/mem.h> /* get mem tables */
#include <asm/arch/sys_proto.h>
#include <asm/arch/sys_info.h>
#include <i2c.h>
/**************************************************************************
* get_prod_id() - get id info from chips
***************************************************************************/
static u32 get_prod_id(void)
{
u32 p;
p = __raw_readl(PRODUCTION_ID); /* get production ID */
return((p & CPU_242X_PID_MASK) >> 16);
}
/**************************************************************************
* get_cpu_type() - low level get cpu type
* - no C globals yet.
* - just looking to say if this is a 2422 or 2420 or ...
* - to start with we will look at switch settings..
* - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
* (mux for 2420, non-mux for 2422).
***************************************************************************/
u32 get_cpu_type(void)
{
u32 v;
switch(get_prod_id()){
case 1:;/* 2420 */
case 2: return(CPU_2420); break; /* 2420 pop */
case 4: return(CPU_2422); break;
case 8: return(CPU_2423); break;
default: break; /* early 2420/2422's unmarked */
}
v = __raw_readl(TAP_IDCODE_REG);
v &= CPU_24XX_ID_MASK;
if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */
if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
return(CPU_2420);
else
return(CPU_2422);
} else
return(CPU_2420); /* don't know, say 2420 */
}
/******************************************
* get_cpu_rev(void) - extract version info
******************************************/
u32 get_cpu_rev(void)
{
u32 v;
v = __raw_readl(TAP_IDCODE_REG);
v = v >> 28;
return(v+1); /* currently 2422 and 2420 match up */
}
/****************************************************
* is_mem_sdr() - return 1 if mem type in use is SDR
****************************************************/
u32 is_mem_sdr(void)
{
volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
if(*burst == H4_2420_SDRC_MR_0_SDR)
return(1);
return(0);
}
/***********************************************************
* get_mem_type() - identify type of mDDR part used.
* 2422 uses stacked DDR, 2 parts CS0/CS1.
* 2420 may have 1 or 2, no good way to know...only init 1...
* when eeprom data is up we can select 1 more.
*************************************************************/
u32 get_mem_type(void)
{
u32 cpu, sdr = is_mem_sdr();
cpu = get_cpu_type();
if (cpu == CPU_2422 || cpu == CPU_2423)
return(DDR_STACKED);
if(get_prod_id() == 0x2)
return(XDR_POP);
if (get_board_type() == BOARD_H4_MENELAUS)
if(sdr)
return(SDR_DISCRETE);
else
return(DDR_COMBO);
else
if(sdr) /* SDP + SDR kit */
return(SDR_DISCRETE);
else
return(DDR_DISCRETE); /* origional SDP */
}
/***********************************************************************
* get_cs0_size() - get size of chip select 0/1
************************************************************************/
u32 get_sdr_cs_size(u32 offset)
{
u32 size;
size = __raw_readl(SDRC_MCFG_0+offset) >> 8; /* get ram size field */
size &= 0x2FF; /* remove unwanted bits */
size *= SZ_2M; /* find size in MB */
return(size);
}
/***********************************************************************
* get_board_type() - get board type based on current production stats.
* --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
* when they are available we can get info from there. This should
* be correct of all known boards up until today.
************************************************************************/
u32 get_board_type(void)
{
if (i2c_probe(I2C_MENELAUS) == 0)
return(BOARD_H4_MENELAUS);
else
return(BOARD_H4_SDP);
}
/******************************************************************
* get_sysboot_value() - get init word settings (dip switch on h4)
******************************************************************/
inline u32 get_sysboot_value(void)
{
return(0x00000FFF & __raw_readl(CONTROL_STATUS));
}
/***************************************************************************
* get_gpmc0_base() - Return current address hardware will be
* fetching from. The below effectively gives what is correct, its a bit
* mis-leading compared to the TRM. For the most general case the mask
* needs to be also taken into account this does work in practice.
* - for u-boot we currently map:
* -- 0 to nothing,
* -- 4 to flash
* -- 8 to enent
* -- c to wifi
****************************************************************************/
u32 get_gpmc0_base(void)
{
u32 b;
b = __raw_readl(GPMC_CONFIG7_0);
b &= 0x1F; /* keep base [5:0] */
b = b << 24; /* ret 0x0b000000 */
return(b);
}
/*****************************************************************
* is_gpmc_muxed() - tells if address/data lines are multiplexed
*****************************************************************/
u32 is_gpmc_muxed(void)
{
u32 mux;
mux = get_sysboot_value();
if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
return(GPMC_MUXED); /* NAND Boot mode */
if (mux & BIT1) /* if mux'ed */
return(GPMC_MUXED);
else
return(GPMC_NONMUXED);
}
/************************************************************************
* get_gpmc0_type() - read sysboot lines to see type of memory attached
************************************************************************/
u32 get_gpmc0_type(void)
{
u32 type;
type = get_sysboot_value();
if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
return(TYPE_NAND);
else
return(TYPE_NOR);
}
/*******************************************************************
* get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
*******************************************************************/
u32 get_gpmc0_width(void)
{
u32 width;
width = get_sysboot_value();
if ((width & 0xF) == (BIT3|BIT2))
return(WIDTH_8BIT);
else
return(WIDTH_16BIT);
}
/*********************************************************************
* wait_on_value() - common routine to allow waiting for changes in
* volatile regs.
*********************************************************************/
u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
{
u32 i = 0, val;
do {
++i;
val = __raw_readl(read_addr) & read_bit_mask;
if (val == match_value)
return(1);
if (i==bound)
return(0);
} while (1);
}
/*********************************************************************
* display_board_info() - print banner with board info.
*********************************************************************/
void display_board_info(u32 btype)
{
char cpu_2420[] = "2420"; /* cpu type */
char cpu_2422[] = "2422";
char cpu_2423[] = "2423";
char db_men[] = "Menelaus"; /* board type */
char db_ip[] = "IP";
char mem_sdr[] = "mSDR"; /* memory type */
char mem_ddr[] = "mDDR";
char t_tst[] = "TST"; /* security level */
char t_emu[] = "EMU";
char t_hs[] = "HS";
char t_gp[] = "GP";
char unk[] = "?";
char *cpu_s, *db_s, *mem_s, *sec_s;
u32 cpu, rev, sec;
rev = get_cpu_rev();
cpu = get_cpu_type();
sec = get_device_type();
if(is_mem_sdr())
mem_s = mem_sdr;
else
mem_s = mem_ddr;
if(cpu == CPU_2423)
cpu_s = cpu_2423;
else if (cpu == CPU_2422)
cpu_s = cpu_2422;
else
cpu_s = cpu_2420;
if(btype == BOARD_H4_MENELAUS)
db_s = db_men;
else
db_s = db_ip;
switch(sec){
case TST_DEVICE: sec_s = t_tst; break;
case EMU_DEVICE: sec_s = t_emu; break;
case HS_DEVICE: sec_s = t_hs; break;
case GP_DEVICE: sec_s = t_gp; break;
default: sec_s = unk;
}
printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev-1);
printf("TI H4 SDP Base Board + %s Daughter Board + %s \n", db_s, mem_s);
}
/*************************************************************************
* get_board_rev() - setup to pass kernel board revision information
* 0 = 242x IP platform (first 2xx boards)
* 1 = 242x Menelaus platfrom.
*************************************************************************/
u32 get_board_rev(void)
{
u32 rev = 0;
u32 btype = get_board_type();
if (btype == BOARD_H4_MENELAUS){
rev = 1;
}
return(rev);
}
/********************************************************
* get_base(); get upper addr of current execution
*******************************************************/
u32 get_base(void)
{
u32 val;
__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
val &= 0xF0000000;
val >>= 28;
return(val);
}
/********************************************************
* get_base2(); get 2upper addr of current execution
*******************************************************/
u32 get_base2(void)
{
u32 val;
__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
val &= 0xFF000000;
val >>= 24;
return(val);
}
/********************************************************
* running_in_flash() - tell if currently running in
* flash.
*******************************************************/
u32 running_in_flash(void)
{
if (get_base() < 4)
return(1); /* in flash */
return(0); /* running in SRAM or SDRAM */
}
/********************************************************
* running_in_sram() - tell if currently running in
* sram.
*******************************************************/
u32 running_in_sram(void)
{
if (get_base() == 4)
return(1); /* in SRAM */
return(0); /* running in FLASH or SDRAM */
}
/********************************************************
* running_in_sdram() - tell if currently running in
* flash.
*******************************************************/
u32 running_in_sdram(void)
{
if (get_base() > 4)
return(1); /* in sdram */
return(0); /* running in SRAM or FLASH */
}
/*************************************************************
* running_from_internal_boot() - am I a signed NOR image.
*************************************************************/
u32 running_from_internal_boot(void)
{
u32 v, base;
v = get_sysboot_value() & BIT3;
base = get_base2();
/* if running at mask rom flash address and
* sysboot3 says this was an internal boot
*/
if ((base == 0x08) && v)
return(1);
else
return(0);
}
/*************************************************************
* get_device_type(): tell if GP/HS/EMU/TST
*************************************************************/
u32 get_device_type(void)
{
int mode;
mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8);
return(mode >>= 8);
}