mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
257 lines
7 KiB
C
257 lines
7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* From Coreboot
|
|
* Copyright (C) 2008-2009 coresystems GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ahci.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pch_common.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/arch/pch.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void common_sata_init(struct udevice *dev, unsigned int port_map)
|
|
{
|
|
u32 reg32;
|
|
u16 reg16;
|
|
|
|
/* Set IDE I/O Configuration */
|
|
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
|
|
dm_pci_write_config32(dev, IDE_CONFIG, reg32);
|
|
|
|
/* Port enable */
|
|
dm_pci_read_config16(dev, 0x92, ®16);
|
|
reg16 &= ~0x3f;
|
|
reg16 |= port_map;
|
|
dm_pci_write_config16(dev, 0x92, reg16);
|
|
|
|
/* SATA Initialization register */
|
|
port_map &= 0xff;
|
|
dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
|
|
}
|
|
|
|
static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch)
|
|
{
|
|
unsigned int port_map, speed_support, port_tx;
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
const char *mode;
|
|
u32 reg32;
|
|
u16 reg16;
|
|
|
|
debug("SATA: Initializing...\n");
|
|
|
|
/* SATA configuration */
|
|
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
|
|
speed_support = fdtdec_get_int(blob, node,
|
|
"sata_interface_speed_support", 0);
|
|
|
|
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
|
|
if (!mode || !strcmp(mode, "ahci")) {
|
|
ulong abar;
|
|
|
|
debug("SATA: Controller in AHCI mode\n");
|
|
|
|
/* Set timings */
|
|
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
|
|
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
|
|
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
|
|
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
|
|
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
|
|
|
|
/* Sync DMA */
|
|
dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
|
|
dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
|
|
|
|
common_sata_init(dev, 0x8000 | port_map);
|
|
|
|
/* Initialize AHCI memory-mapped space */
|
|
abar = dm_pci_read_bar32(dev, 5);
|
|
debug("ABAR: %08lx\n", abar);
|
|
/* CAP (HBA Capabilities) : enable power management */
|
|
reg32 = readl(abar + 0x00);
|
|
reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */
|
|
reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
|
|
/* Set ISS, if available */
|
|
if (speed_support) {
|
|
reg32 &= ~0x00f00000;
|
|
reg32 |= (speed_support & 0x03) << 20;
|
|
}
|
|
writel(reg32, abar + 0x00);
|
|
/* PI (Ports implemented) */
|
|
writel(port_map, abar + 0x0c);
|
|
(void) readl(abar + 0x0c); /* Read back 1 */
|
|
(void) readl(abar + 0x0c); /* Read back 2 */
|
|
/* CAP2 (HBA Capabilities Extended)*/
|
|
reg32 = readl(abar + 0x24);
|
|
reg32 &= ~0x00000002;
|
|
writel(reg32, abar + 0x24);
|
|
/* VSP (Vendor Specific Register */
|
|
reg32 = readl(abar + 0xa0);
|
|
reg32 &= ~0x00000005;
|
|
writel(reg32, abar + 0xa0);
|
|
} else if (!strcmp(mode, "combined")) {
|
|
debug("SATA: Controller in combined mode\n");
|
|
|
|
/* No AHCI: clear AHCI base */
|
|
dm_pci_write_bar32(dev, 5, 0x00000000);
|
|
/* And without AHCI BAR no memory decoding */
|
|
dm_pci_read_config16(dev, PCI_COMMAND, ®16);
|
|
reg16 &= ~PCI_COMMAND_MEMORY;
|
|
dm_pci_write_config16(dev, PCI_COMMAND, reg16);
|
|
|
|
dm_pci_write_config8(dev, 0x09, 0x80);
|
|
|
|
/* Set timings */
|
|
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
|
|
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
|
|
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
|
|
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
|
|
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
|
|
|
|
/* Sync DMA */
|
|
dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
|
|
dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
|
|
|
|
common_sata_init(dev, port_map);
|
|
} else {
|
|
debug("SATA: Controller in plain-ide mode\n");
|
|
|
|
/* No AHCI: clear AHCI base */
|
|
dm_pci_write_bar32(dev, 5, 0x00000000);
|
|
|
|
/* And without AHCI BAR no memory decoding */
|
|
dm_pci_read_config16(dev, PCI_COMMAND, ®16);
|
|
reg16 &= ~PCI_COMMAND_MEMORY;
|
|
dm_pci_write_config16(dev, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Native mode capable on both primary and secondary (0xa)
|
|
* OR'ed with enabled (0x50) = 0xf
|
|
*/
|
|
dm_pci_write_config8(dev, 0x09, 0x8f);
|
|
|
|
/* Set timings */
|
|
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
|
|
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
|
|
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
|
|
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
|
|
IDE_SITRE | IDE_ISP_3_CLOCKS |
|
|
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
|
|
|
|
/* Sync DMA */
|
|
dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
|
|
dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
|
|
|
|
common_sata_init(dev, port_map);
|
|
}
|
|
|
|
/* Set Gen3 Transmitter settings if needed */
|
|
port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
|
|
if (port_tx)
|
|
pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx);
|
|
|
|
port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
|
|
if (port_tx)
|
|
pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx);
|
|
|
|
/* Additional Programming Requirements */
|
|
pch_common_sir_write(dev, 0x04, 0x00001600);
|
|
pch_common_sir_write(dev, 0x28, 0xa0000033);
|
|
reg32 = pch_common_sir_read(dev, 0x54);
|
|
reg32 &= 0xff000000;
|
|
reg32 |= 0x5555aa;
|
|
pch_common_sir_write(dev, 0x54, reg32);
|
|
pch_common_sir_write(dev, 0x64, 0xcccc8484);
|
|
reg32 = pch_common_sir_read(dev, 0x68);
|
|
reg32 &= 0xffff0000;
|
|
reg32 |= 0xcccc;
|
|
pch_common_sir_write(dev, 0x68, reg32);
|
|
reg32 = pch_common_sir_read(dev, 0x78);
|
|
reg32 &= 0x0000ffff;
|
|
reg32 |= 0x88880000;
|
|
pch_common_sir_write(dev, 0x78, reg32);
|
|
pch_common_sir_write(dev, 0x84, 0x001c7000);
|
|
pch_common_sir_write(dev, 0x88, 0x88338822);
|
|
pch_common_sir_write(dev, 0xa0, 0x001c7000);
|
|
pch_common_sir_write(dev, 0xc4, 0x0c0c0c0c);
|
|
pch_common_sir_write(dev, 0xc8, 0x0c0c0c0c);
|
|
pch_common_sir_write(dev, 0xd4, 0x10000000);
|
|
|
|
pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000);
|
|
pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100);
|
|
}
|
|
|
|
static void bd82x6x_sata_enable(struct udevice *dev)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
unsigned port_map;
|
|
const char *mode;
|
|
u16 map = 0;
|
|
|
|
/*
|
|
* Set SATA controller mode early so the resource allocator can
|
|
* properly assign IO/Memory resources for the controller.
|
|
*/
|
|
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
|
|
if (mode && !strcmp(mode, "ahci"))
|
|
map = 0x0060;
|
|
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
|
|
|
|
map |= (port_map ^ 0x3f) << 8;
|
|
dm_pci_write_config16(dev, 0x90, map);
|
|
}
|
|
|
|
static int bd82x6x_sata_bind(struct udevice *dev)
|
|
{
|
|
struct udevice *scsi_dev;
|
|
int ret;
|
|
|
|
if (gd->flags & GD_FLG_RELOC) {
|
|
ret = ahci_bind_scsi(dev, &scsi_dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd82x6x_sata_probe(struct udevice *dev)
|
|
{
|
|
struct udevice *pch;
|
|
int ret;
|
|
|
|
ret = uclass_first_device_err(UCLASS_PCH, &pch);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
bd82x6x_sata_enable(dev);
|
|
else {
|
|
bd82x6x_sata_init(dev, pch);
|
|
ret = ahci_probe_scsi_pci(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id bd82x6x_ahci_ids[] = {
|
|
{ .compatible = "intel,pantherpoint-ahci" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(ahci_ivybridge_drv) = {
|
|
.name = "ahci_ivybridge",
|
|
.id = UCLASS_AHCI,
|
|
.of_match = bd82x6x_ahci_ids,
|
|
.bind = bd82x6x_sata_bind,
|
|
.probe = bd82x6x_sata_probe,
|
|
};
|