mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 18:53:06 +00:00
4c2eb955cf
Add support for the Meson G12A dwmac glue compatible needed after Linux 5.12 sync. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
166 lines
4.5 KiB
C
166 lines
4.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2021 BayLibre, SAS
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <phy.h>
|
|
#include "designware.h"
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
|
|
#define ETH_REG_0 0x0
|
|
#define ETH_REG_1 0x4
|
|
#define ETH_REG_2 0x18
|
|
#define ETH_REG_3 0x1c
|
|
|
|
#define GX_ETH_REG_0_PHY_INTF BIT(0)
|
|
#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
|
|
#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
|
|
#define GX_ETH_REG_0_PHY_CLK_EN BIT(10)
|
|
#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11)
|
|
#define GX_ETH_REG_0_CLK_EN BIT(12)
|
|
|
|
#define AXG_ETH_REG_0_PHY_INTF_RGMII BIT(0)
|
|
#define AXG_ETH_REG_0_PHY_INTF_RMII BIT(2)
|
|
#define AXG_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
|
|
#define AXG_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
|
|
#define AXG_ETH_REG_0_PHY_CLK_EN BIT(10)
|
|
#define AXG_ETH_REG_0_INVERT_RMII_CLK BIT(11)
|
|
#define AXG_ETH_REG_0_CLK_EN BIT(12)
|
|
|
|
struct dwmac_meson8b_plat {
|
|
struct dw_eth_pdata dw_eth_pdata;
|
|
int (*dwmac_setup)(struct udevice *dev, struct eth_pdata *edata);
|
|
void *regs;
|
|
};
|
|
|
|
static int dwmac_meson8b_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct dwmac_meson8b_plat *pdata = dev_get_plat(dev);
|
|
|
|
pdata->regs = (void *)dev_read_addr_index(dev, 1);
|
|
if ((fdt_addr_t)pdata->regs == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
pdata->dwmac_setup = (void *)dev_get_driver_data(dev);
|
|
if (!pdata->dwmac_setup)
|
|
return -EINVAL;
|
|
|
|
return designware_eth_of_to_plat(dev);
|
|
}
|
|
|
|
static int dwmac_setup_axg(struct udevice *dev, struct eth_pdata *edata)
|
|
{
|
|
struct dwmac_meson8b_plat *plat = dev_get_plat(dev);
|
|
|
|
switch (edata->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
/* Set RGMII mode */
|
|
setbits_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII |
|
|
AXG_ETH_REG_0_TX_PHASE(1) |
|
|
AXG_ETH_REG_0_TX_RATIO(4) |
|
|
AXG_ETH_REG_0_PHY_CLK_EN |
|
|
AXG_ETH_REG_0_CLK_EN);
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
/* TOFIX: handle amlogic,tx-delay-ns & rx-internal-delay-ps from DT */
|
|
setbits_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII |
|
|
AXG_ETH_REG_0_TX_RATIO(4) |
|
|
AXG_ETH_REG_0_PHY_CLK_EN |
|
|
AXG_ETH_REG_0_CLK_EN);
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
/* Set RMII mode */
|
|
out_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RMII |
|
|
AXG_ETH_REG_0_INVERT_RMII_CLK |
|
|
AXG_ETH_REG_0_CLK_EN);
|
|
break;
|
|
default:
|
|
dev_err(dev, "Unsupported PHY mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwmac_setup_gx(struct udevice *dev, struct eth_pdata *edata)
|
|
{
|
|
struct dwmac_meson8b_plat *plat = dev_get_plat(dev);
|
|
|
|
switch (edata->phy_interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
/* Set RGMII mode */
|
|
setbits_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
|
|
GX_ETH_REG_0_TX_PHASE(1) |
|
|
GX_ETH_REG_0_TX_RATIO(4) |
|
|
GX_ETH_REG_0_PHY_CLK_EN |
|
|
GX_ETH_REG_0_CLK_EN);
|
|
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
/* TOFIX: handle amlogic,tx-delay-ns & rx-internal-delay-ps from DT */
|
|
setbits_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
|
|
GX_ETH_REG_0_TX_RATIO(4) |
|
|
GX_ETH_REG_0_PHY_CLK_EN |
|
|
GX_ETH_REG_0_CLK_EN);
|
|
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
/* Set RMII mode */
|
|
out_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
|
|
GX_ETH_REG_0_CLK_EN);
|
|
|
|
if (!IS_ENABLED(CONFIG_MESON_GXBB))
|
|
writel(0x10110181, plat->regs + ETH_REG_2);
|
|
|
|
break;
|
|
default:
|
|
dev_err(dev, "Unsupported PHY mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwmac_meson8b_probe(struct udevice *dev)
|
|
{
|
|
struct dwmac_meson8b_plat *pdata = dev_get_plat(dev);
|
|
struct eth_pdata *edata = &pdata->dw_eth_pdata.eth_pdata;
|
|
int ret;
|
|
|
|
ret = pdata->dwmac_setup(dev, edata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return designware_eth_probe(dev);
|
|
}
|
|
|
|
static const struct udevice_id dwmac_meson8b_ids[] = {
|
|
{ .compatible = "amlogic,meson-gxbb-dwmac", .data = (ulong)dwmac_setup_gx },
|
|
{ .compatible = "amlogic,meson-g12a-dwmac", .data = (ulong)dwmac_setup_axg },
|
|
{ .compatible = "amlogic,meson-axg-dwmac", .data = (ulong)dwmac_setup_axg },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dwmac_meson8b) = {
|
|
.name = "dwmac_meson8b",
|
|
.id = UCLASS_ETH,
|
|
.of_match = dwmac_meson8b_ids,
|
|
.of_to_plat = dwmac_meson8b_of_to_plat,
|
|
.probe = dwmac_meson8b_probe,
|
|
.ops = &designware_eth_ops,
|
|
.priv_auto = sizeof(struct dw_eth_dev),
|
|
.plat_auto = sizeof(struct dwmac_meson8b_plat),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|