Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 03:03:05 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/spl/Kconfig.tpl
Alper Nebi Yasak 6516c9b349 spl: binman: Disable u_boot_any symbols for i.MX8M boards 
The i.MX8M boards use partially specified binman images which have an
SPL entry without a U-Boot entry. This would normally cause an error due
to the 'u_boot_any' binman symbols declared by BINMAN_UBOOT_SYMBOLS
requiring a U-Boot-like entry in the same image as the SPL.

However, a problem in the ARMv8 __image_copy_start symbol definition
effectively disables binman from attempting to write any symbols at all,
so everything appears to work fine until runtime. A future patch fixes
the issue in the linker scripts, which lets binman fill in the symbols,
which would result in the build error described above.

Explicitly disable the 'u_boot_any' symbols for i.MX8M boards. They are
already effectively unusable, and they are incompatible with the boards'
current binman image descriptions.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-06-28 03:09:52 +01:00

335 lines
11 KiB
Smarty
Raw Blame History

menu "TPL configuration options"
depends on TPL
config TPL_SIZE_LIMIT
hex "Maximum size of TPL image"
default 0x0
help
Specifies the maximum length of the U-Boot TPL image.
If this value is zero, it is ignored.
config TPL_BINMAN_SYMBOLS
bool "Support binman symbols in TPL"
depends on TPL_FRAMEWORK && BINMAN
default y
help
This enables use of symbols in TPL which refer to other entries in
the same binman image as the TPL. These can be declared with the
binman_sym_declare(type, entry, prop) macro and accessed by the
binman_sym(type, entry, prop) macro defined in binman_sym.h.
See tools/binman/binman.rst for a detailed explanation.
config TPL_BINMAN_UBOOT_SYMBOLS
bool "Declare binman symbols for U-Boot phases in TPL"
depends on TPL_BINMAN_SYMBOLS
default n if ARCH_IMX8M
default y
help
This enables use of symbols in TPL which refer to U-Boot phases,
enabling TPL to obtain the location and size of its next phase simply
by calling spl_get_image_pos() and spl_get_image_size().
For this to work, you must have all U-Boot phases in the same binman
image, so binman can update TPL with the locations of everything.
config TPL_FRAMEWORK
bool "Support TPL based upon the common SPL framework"
default y if SPL_FRAMEWORK
help
Enable the SPL framework under common/spl/ for TPL builds.
This framework supports MMC, NAND and YMODEM and other methods
loading of U-Boot's SPL stage. If unsure, say Y.
config TPL_BANNER_PRINT
bool "Enable output of the TPL banner 'U-Boot TPL ...'"
default y
help
If this option is enabled, TPL will print the banner with version
info. Disabling this option could be useful to reduce TPL boot time
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
config TPL_HANDOFF
bool "Pass hand-off information from TPL to SPL and U-Boot proper"
depends on HANDOFF && TPL_BLOBLIST
default y
help
This option enables TPL to write handoff information. This can be
used to pass information like the size of SDRAM from TPL to U-Boot
proper. The information is also available to SPL if it is useful
there.
config TPL_BOARD_INIT
bool "Call board-specific initialization in TPL"
help
If this option is enabled, U-Boot will call the function
spl_board_init() from board_init_r(). This function should be
provided by the board.
config TPL_BOOTCOUNT_LIMIT
bool "Support bootcount in TPL"
depends on TPL_ENV_SUPPORT
help
If this option is enabled, the TPL will support bootcount.
For example, it may be useful to choose the device to boot.
config TPL_SYS_MALLOC_SIMPLE
bool
prompt "Only use malloc_simple functions in the TPL"
help
Say Y here to only use the *_simple malloc functions from
malloc_simple.c, rather then using the versions from dlmalloc.c;
this will make the TPL binary smaller at the cost of more heap
usage as the *_simple malloc functions do not re-use free-ed mem.
config TPL_SEPARATE_BSS
bool "BSS section is in a different memory region from text"
default y if SPL_SEPARATE_BSS
help
Some platforms need a large BSS region in TPL and can provide this
because RAM is already set up. In this case BSS can be moved to RAM.
This option should then be enabled so that the correct device tree
location is used. Normally we put the device tree at the end of BSS
but with this option enabled, it goes at _image_binary_end.
config TPL_LDSCRIPT
string "Linker script for the TPL stage"
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
default "arch/\$(ARCH)/cpu/u-boot-spl.lds"
help
The TPL stage will usually require a different linker-script
(as it runs from a different memory region) than the regular
U-Boot stage. Set this to the path of the linker-script to
be used for TPL.
May be left empty to trigger the Makefile infrastructure to
fall back to the linker-script used for the SPL stage.
config TPL_NEEDS_SEPARATE_STACK
bool "TPL needs a separate initial stack-pointer"
help
Enable, if the TPL stage should not inherit its initial
stack-pointer from the settings for the SPL stage.
config TPL_POWER
bool "Support power drivers"
help
Enable support for power control in TPL. This includes support
for PMICs (Power-management Integrated Circuits) and some of the
features provided by PMICs. In particular, voltage regulators can
be used to enable/disable power and vary its voltage. That can be
useful in TPL to turn on boot peripherals and adjust CPU voltage
so that the clock speed can be increased. This enables the drivers
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an TPL build.
config TPL_TEXT_BASE
hex "Base address for the .text section of the TPL stage"
default 0
help
The base address for the .text section of the TPL stage.
config TPL_MAX_SIZE
hex "Maximum size (in bytes) for the TPL stage"
default 0x2e000 if ROCKCHIP_RK3399
default 0x8000 if ROCKCHIP_RK3288
default 0x7000 if ROCKCHIP_RK322X || ROCKCHIP_RK3328 || ROCKCHIP_RK3368
default 0x2800 if ROCKCHIP_PX30
default 0x0
help
The maximum size (in bytes) of the TPL stage.
config TPL_STACK
hex "Address of the initial stack-pointer for the TPL stage"
depends on TPL_NEEDS_SEPARATE_STACK
help
The address of the initial stack-pointer for the TPL stage.
Usually this will be the (aligned) top-of-stack.
config TPL_READ_ONLY
bool
depends on TPL_OF_PLATDATA
select TPL_OF_PLATDATA_NO_BIND
select TPL_OF_PLATDATA_RT
help
Some platforms (e.g. x86 Apollo Lake) load SPL into a read-only
section of memory. This means that of-platdata must make a copy (in
writeable memory) of anything it wants to modify, such as
device-private data.
config TPL_BOOTROM_SUPPORT
bool "Support returning to the BOOTROM (from TPL)"
help
Some platforms (e.g. the Rockchip RK3368) provide support in their
ROM for loading the next boot-stage after performing basic setup
from the TPL stage.
Enable this option, to return to the BOOTROM through the
BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
boot device list, if not implemented for a given board)
config TPL_CRC32
bool "Support CRC32 in TPL"
default y if TPL_ENV_SUPPORT || TPL_BLOBLIST
help
Enable this to support CRC32 in uImages or FIT images within SPL.
This is a 32-bit checksum value that can be used to verify images.
For FIT images, this is the least secure type of checksum, suitable
for detected accidental image corruption. For secure applications you
should consider SHA1 or SHA256.
config TPL_DRIVERS_MISC
bool "Support misc drivers in TPL"
help
Enable miscellaneous drivers in TPL. These drivers perform various
tasks that don't fall nicely into other categories, Enable this
option to build the drivers in drivers/misc as part of an TPL
build, for those that support building in TPL (not all drivers do).
config TPL_ENV_SUPPORT
bool "Support an environment"
help
Enable environment support in TPL. See SPL_ENV_SUPPORT for details.
config TPL_GPIO
bool "Support GPIO in TPL"
help
Enable support for GPIOs (General-purpose Input/Output) in TPL.
GPIOs allow U-Boot to read the state of an input line (high or
low) and set the state of an output line. This can be used to
drive LEDs, control power to various system parts and read user
input. GPIOs can be useful in TPL to enable a 'sign-of-life' LED,
for example. Enable this option to build the drivers in
drivers/gpio as part of an TPL build.
config TPL_I2C
bool "Support I2C"
help
Enable support for the I2C bus in TPL. See SPL_I2C for
details.
config TPL_LIBCOMMON_SUPPORT
bool "Support common libraries"
help
Enable support for common U-Boot libraries within TPL. See
SPL_LIBCOMMON_SUPPORT for details.
config TPL_LIBGENERIC_SUPPORT
bool "Support generic libraries"
help
Enable support for generic U-Boot libraries within TPL. See
SPL_LIBGENERIC_SUPPORT for details.
config TPL_MPC8XXX_INIT_DDR
bool "Support MPC8XXX DDR init"
help
Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See
SPL_MPC8XXX_INIT_DDR for details.
config TPL_MMC
bool "Support MMC"
depends on MMC
help
Enable support for MMC within TPL. See SPL_MMC for details.
config TPL_NAND_SUPPORT
bool "Support NAND flash"
help
Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details.
config TPL_PCI
bool "Support PCI drivers"
help
Enable support for PCI in TPL. For platforms that need PCI to boot,
or must perform some init using PCI in SPL, this provides the
necessary driver support. This enables the drivers in drivers/pci
as part of a TPL build.
config TPL_PCH
bool "Support PCH drivers"
help
Enable support for PCH (Platform Controller Hub) devices in TPL.
These are used to set up GPIOs and the SPI peripheral early in
boot. This enables the drivers in drivers/pch as part of a TPL
build.
config TPL_RAM_SUPPORT
bool "Support booting from RAM"
help
Enable booting of an image in RAM. The image can be preloaded or
it can be loaded by TPL directly into RAM (e.g. using USB).
config TPL_RAM_DEVICE
bool "Support booting from preloaded image in RAM"
depends on TPL_RAM_SUPPORT
help
Enable booting of an image already loaded in RAM. The image has to
be already in memory when TPL takes over, e.g. loaded by the boot
ROM.
config TPL_RTC
bool "Support RTC drivers"
help
Enable RTC (Real-time Clock) support in TPL. This includes support
for reading and setting the time. Some RTC devices also have some
non-volatile (battery-backed) memory which is accessible if
needed. This enables the drivers in drivers/rtc as part of an TPL
build.
config TPL_SERIAL
bool "Support serial"
select TPL_PRINTF
select TPL_STRTO
help
Enable support for serial in TPL. See SPL_SERIAL for
details.
config TPL_SPI_FLASH_SUPPORT
bool "Support SPI flash drivers"
help
Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT
for details.
config TPL_SPI_FLASH_TINY
bool "Enable low footprint TPL SPI Flash support"
depends on TPL_SPI_FLASH_SUPPORT && !SPI_FLASH_BAR
default y if SPI_FLASH
help
Enable lightweight TPL SPI Flash support that supports just reading
data/images from flash. No support to write/erase flash. Enable
this if you have TPL size limitations and don't need full-fledged
SPI flash support.
config TPL_SPI_LOAD
bool "Support loading from SPI flash"
depends on TPL_SPI_FLASH_SUPPORT
help
Enable support for loading next stage, U-Boot or otherwise, from
SPI NOR in U-Boot TPL.
config TPL_SPI
bool "Support SPI drivers"
help
Enable support for using SPI in TPL. See SPL_SPI for
details.
config TPL_DM_SPI
bool "Support SPI DM drivers in TPL"
help
Enable support for SPI DM drivers in TPL.
config TPL_DM_SPI_FLASH
bool "Support SPI DM FLASH drivers in TPL"
help
Enable support for SPI DM flash drivers in TPL.
config TPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
depends on TPL_SERIAL
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable
means of transmitting U-Boot over a serial line for using in TPL,
with a checksum to ensure correctness.
endmenu
Reference in a new issue View git blame Copy permalink