u-boot/include/configs/km/km-mpc83xx.h
Holger Brunck 5043ce2874 km/ppc: remove km-mpc8360.h and km-mpc832x.h
Next step to get rid of the header files in icnlude/configs. Move
most of the defines to km83xx.c directly. Some remaining defines
which should go to Kconfig are moved to km-mpc83xx.h for now.

Also remove some unused defines and move one define to powerpc.env
as we only need it there.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2023-02-06 13:04:53 -05:00

71 lines
1.6 KiB
C

/*
* DDR Setup
*/
#define CFG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */
#define CFG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
/*
* The reserved memory
*/
#define CFG_SYS_FLASH_BASE 0xF0000000
/* Reserve 768 kB for Mon */
/*
* Initial RAM Base Address Setup
*/
#define CFG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
/*
* Init Local Bus Memory Controller:
*
* Bank Bus Machine PortSz Size Device
* ---- --- ------- ------ ----- ------
* 0 Local GPCM 16 bit 256MB FLASH
* 1 Local GPCM 8 bit 128MB GPIO/PIGGY
*
*/
/*
* FLASH on the Local Bus
*/
#define CFG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */
#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE }
#define CFG_SYS_KMBEC_FPGA_BASE 0xE8000000
#if defined(CONFIG_CMD_NAND)
#define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE
#endif
#if defined(CONFIG_TARGET_KMCOGE5NE) || defined(CONFIG_TARGET_KMETER1)
/*
* System IO Setup
*/
#define CFG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI)
#define CFG_SYS_DDRCDR (\
DDRCDR_EN | \
DDRCDR_Q_DRN)
#else
/*
* System IO Config
*/
#define CFG_SYS_SICRL SICRL_IRQ_CKS
#define CFG_SYS_DDRCDR (\
DDRCDR_EN | \
DDRCDR_PZ_MAXZ | \
DDRCDR_NZ_MAXZ | \
DDRCDR_M_ODR)
#endif
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_SYS_BOOTMAPSZ (8 << 20)