u-boot/arch/arc/cpu/arcv1/start.S
Alexey Brodkin fdff23702a arc: rename "arc700" in "arcv1"
As a preparation to ARCv2 port submission we rename "arc700" folder to
"arcv1" which stands for ARCv1 ISA also known as ARCompact.

This will allow us to add more flavours of binary-compatible ARCv1 CPUs
like ARC600 if needed later on and all required ARCv2 CPUs (which are
binary incompatible with ARCv1) in "arcv2" folder in subsequent commits.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
2015-01-15 22:40:50 +03:00

254 lines
5.1 KiB
ArmAsm

/*
* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm-offsets.h>
#include <config.h>
#include <asm/arcregs.h>
/*
* Note on the LD/ST addressing modes with address register write-back
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [%sp, -4]
.endm
.macro PUSHAX aux
lr %r9, [\aux]
PUSH %r9
.endm
.macro SAVE_R1_TO_R24
PUSH %r1
PUSH %r2
PUSH %r3
PUSH %r4
PUSH %r5
PUSH %r6
PUSH %r7
PUSH %r8
PUSH %r9
PUSH %r10
PUSH %r11
PUSH %r12
PUSH %r13
PUSH %r14
PUSH %r15
PUSH %r16
PUSH %r17
PUSH %r18
PUSH %r19
PUSH %r20
PUSH %r21
PUSH %r22
PUSH %r23
PUSH %r24
.endm
.macro SAVE_ALL_SYS
/* saving %r0 to reg->r0 in advance since we read %ecr into it */
st %r0, [%sp, -8]
lr %r0, [%ecr] /* all stack addressing is manual so far */
st %r0, [%sp]
st %sp, [%sp, -4]
/* now move %sp to reg->r0 position so we can do "push" automatically */
sub %sp, %sp, 8
SAVE_R1_TO_R24
PUSH %r25
PUSH %gp
PUSH %fp
PUSH %blink
PUSHAX %eret
PUSHAX %erstatus
PUSH %lp_count
PUSHAX %lp_end
PUSHAX %lp_start
PUSHAX %erbta
.endm
.macro SAVE_EXCEPTION_SOURCE
#ifdef CONFIG_MMU
/* If MMU exists exception faulting address is loaded in EFA reg */
lr %r0, [%efa]
#else
/* Otherwise in ERET (exception return) reg */
lr %r0, [%eret]
#endif
.endm
.section .ivt, "ax",@progbits
.align 4
_ivt:
/* Critical system events */
j _start /* 0 - 0x000 */
j memory_error /* 1 - 0x008 */
j instruction_error /* 2 - 0x010 */
/* Device interrupts */
.rept 29
j interrupt_handler /* 3:31 - 0x018:0xF8 */
.endr
/* Exceptions */
j EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */
j EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */
j EV_TLBMissD /* 0x110, Data TLB miss (0x22) */
j EV_TLBProtV /* 0x118, Protection Violation (0x23)
or Misaligned Access */
j EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */
j EV_Trap /* 0x128, Trap exception (0x25) */
j EV_Extension /* 0x130, Extn Intruction Excp (0x26) */
.text
.globl _start
_start:
/* Setup interrupt vector base that matches "__text_start" */
sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
/* Setup stack pointer */
mov %sp, CONFIG_SYS_INIT_SP_ADDR
mov %fp, %sp
/* Clear bss */
mov %r0, __bss_start
mov %r1, __bss_end
clear_bss:
st.ab 0, [%r0, 4]
brlt %r0, %r1, clear_bss
/* Zero the one and only argument of "board_init_f" */
mov_s %r0, 0
j board_init_f
memory_error:
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_memory_error
instruction_error:
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_instruction_error
interrupt_handler:
/* Todo - save and restore CPU context when interrupts will be in use */
bl do_interrupt_handler
rtie
EV_MachineCheck:
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_machine_check_fault
EV_TLBMissI:
SAVE_ALL_SYS
mov %r0, %sp
j do_itlb_miss
EV_TLBMissD:
SAVE_ALL_SYS
mov %r0, %sp
j do_dtlb_miss
EV_TLBProtV:
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_tlb_prot_violation
EV_PrivilegeV:
SAVE_ALL_SYS
mov %r0, %sp
j do_privilege_violation
EV_Trap:
SAVE_ALL_SYS
mov %r0, %sp
j do_trap
EV_Extension:
SAVE_ALL_SYS
mov %r0, %sp
j do_extension
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r0 = start_addr_sp
* r1 = new__gd
* r2 = relocaddr
*/
.align 4
.globl relocate_code
relocate_code:
/*
* r0-r12 might be clobbered by C functions
* so we use r13-r16 for storage here
*/
mov %r13, %r0 /* save addr_sp */
mov %r14, %r1 /* save addr of gd */
mov %r15, %r2 /* save addr of destination */
mov %r16, %r2 /* %r9 - relocation offset */
sub %r16, %r16, __image_copy_start
/* Set up the stack */
stack_setup:
mov %sp, %r13
mov %fp, %sp
/* Check if monitor is loaded right in place for relocation */
mov %r0, __image_copy_start
cmp %r0, %r15 /* skip relocation if code loaded */
bz do_board_init_r /* in target location already */
/* Copy data (__image_copy_start - __image_copy_end) to new location */
mov %r1, %r15
mov %r2, __image_copy_end
sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
asr %r2, %r2, 2 /* r3 <- amount of words to copy */
mov %lp_count, %r2
lp copy_end
ld.ab %r2,[%r0,4]
st.ab %r2,[%r1,4]
copy_end:
/* Fix relocations related issues */
bl do_elf_reloc_fixups
#ifndef CONFIG_SYS_ICACHE_OFF
bl invalidate_icache_all
#endif
#ifndef CONFIG_SYS_DCACHE_OFF
bl flush_dcache_all
#endif
/* Update position of intterupt vector table */
lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
add %r0, %r0, %r16 /* Update address */
sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
do_board_init_r:
/* Prepare for exection of "board_init_r" in relocated monitor */
mov %r2, board_init_r /* old address of "board_init_r()" */
add %r2, %r2, %r16 /* new address of "board_init_r()" */
mov %r0, %r14 /* 1-st parameter: gd_t */
mov %r1, %r15 /* 2-nd parameter: dest_addr */
j [%r2]