u-boot/include/config_cmd_all.h
Wolfgang Denk a2681707b2 Feature Removal: disable "mtest" command by default
The "mtest" command is of little practical use (if any), and
experience has shown that a large number of board configurations
define useless or even dangerous start and end addresses.  If not even
the board maintainers are able to figure out which memory range can be
reliably tested, how can we expect such from the end users?  As this
problem comes up repeatedly, we rather do not enable this command by
default, so only people who know what they are doing will be
confronted with it.

As this changes the user interface, we allow for a grace period
before this change takes effect. For now, we make "mtest"
configurable through the CONFIG_CMD_MEMTEST variable, which is defined
in include/config_cmd_default.h;  we also add an entry to
doc/feature-removal-schedule.txt which announces the removal of this
default setting in two releases from now, i. e. with v2013.07.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
2013-03-11 15:26:59 -04:00

99 lines
4.4 KiB
C

/*
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License Version 2. This file is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef _CONFIG_CMD_ALL_H
#define _CONFIG_CMD_ALL_H
/*
* Alphabetical list of all possible commands.
*/
#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
#define CONFIG_CMD_ASKENV /* ask for env variable */
#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_BOOTZ /* boot zImage */
#define CONFIG_CMD_BSP /* Board Specific functions */
#define CONFIG_CMD_CACHE /* icache, dcache */
#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
#define CONFIG_CMD_DHCP /* DHCP Support */
#define CONFIG_CMD_DIAG /* Diagnostics */
#define CONFIG_CMD_DISPLAY /* Display support */
#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
#define CONFIG_CMD_ECHO /* echo arguments */
#define CONFIG_CMD_EDITENV /* editenv */
#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMD_FDC /* Floppy Disk Support */
#define CONFIG_CMD_FDOS /* Floppy DOS support */
#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
#define CONFIG_CMD_FPGA /* FPGA configuration Support */
#define CONFIG_CMD_GETTIME /* Get time since boot */
#define CONFIG_CMD_HASH /* calculate hash / digest */
#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_IDE /* IDE harddisk support */
#define CONFIG_CMD_IMI /* iminfo */
#define CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_CMD_IMMAP /* IMMR dump support */
#define CONFIG_CMD_IO /* Access to X86 IO space */
#define CONFIG_CMD_IRQ /* irqinfo */
#define CONFIG_CMD_ITEST /* Integer (and string) test */
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
#define CONFIG_CMD_KGDB /* kgdb */
#define CONFIG_CMD_LICENSE /* console license display */
#define CONFIG_CMD_LOADB /* loadb */
#define CONFIG_CMD_LOADS /* loads */
#define CONFIG_CMD_MEMINFO /* meminfo */
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */
#define CONFIG_CMD_MEMTEST /* mtest */
#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
#define CONFIG_CMD_MII /* MII support */
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_MTDPARTS /* mtd parts support */
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_CMD_NFS /* NFS support */
#define CONFIG_CMD_ONENAND /* OneNAND support */
#define CONFIG_CMD_PCI /* pciinfo */
#define CONFIG_CMD_PCMCIA /* PCMCIA support */
#define CONFIG_CMD_PING /* ping support */
#define CONFIG_CMD_PORTIO /* Port I/O */
#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
#define CONFIG_CMD_RARP /* rarpboot support */
#define CONFIG_CMD_READ /* Read data from partition */
#define CONFIG_CMD_RUN /* run command in env variable */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_CMD_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_SETEXPR /* setexpr support */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SNTP /* SNTP support */
#define CONFIG_CMD_SOURCE /* "source" command support */
#define CONFIG_CMD_SPI /* SPI utility */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UBI /* UBI Support */
#define CONFIG_CMD_UBIFS /* UBIFS Support */
#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
#define CONFIG_CMD_UNZIP /* unzip from memory to memory */
#define CONFIG_CMD_USB /* USB Support */
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
#define CONFIG_CMD_ZFS /* ZFS Support */
#endif /* _CONFIG_CMD_ALL_H */