u-boot/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
Chris Packham e6fce12d14 ARM: mvebu: a38x: move definition of PEX_CFG_DIRECT_ACCESS
PEX_CFG_DIRECT_ACCESS was defined in ddr3_hws_hw_training_def.h despite
only being used in the serdes code. Move this definition to ctrl_pex.h
where all the other PEX defines are. Also remove the duplicate
definition of PEX_DEVICE_AND_VENDOR_ID which is already defined in
ctrl_pex.h.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:01:56 +02:00

88 lines
3.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*/
#ifndef _CTRL_PEX_H
#define _CTRL_PEX_H
#include "high_speed_env_spec.h"
/* Sample at Reset */
#define MPP_SAMPLE_AT_RESET(id) (0xe4200 + (id * 4))
/* PCI Express Control and Status Registers */
#define MAX_PEX_BUSSES 256
#define MISC_REGS_OFFSET 0x18200
#define MV_MISC_REGS_BASE MISC_REGS_OFFSET
#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4)
#define PEX_IF_REGS_OFFSET(if) ((if) > 0 ? \
(0x40000 + ((if) - 1) * 0x4000) : \
0x80000)
#define PEX_IF_REGS_BASE(if) (PEX_IF_REGS_OFFSET(if))
#define PEX_CAPABILITIES_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x60)
#define PEX_LINK_CTRL_STATUS2_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x90)
#define PEX_CTRL_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a00)
#define PEX_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a04)
#define PEX_DBG_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a64)
#define PEX_LINK_CAPABILITY_REG 0x6c
#define PEX_LINK_CTRL_STAT_REG 0x70
#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */
#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS)
#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */
#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS)
/* PEX_CAPABILITIES_REG fields */
#define PCIE0_ENABLE_OFFS 0
#define PCIE0_ENABLE_MASK (0x1 << PCIE0_ENABLE_OFFS)
#define PCIE1_ENABLE_OFFS 1
#define PCIE1_ENABLE_MASK (0x1 << PCIE1_ENABLE_OFFS)
#define PCIE2_ENABLE_OFFS 2
#define PCIE2_ENABLE_MASK (0x1 << PCIE2_ENABLE_OFFS)
#define PCIE3_ENABLE_OFFS 3
#define PCIE4_ENABLE_MASK (0x1 << PCIE3_ENABLE_OFFS)
/* Controller revision info */
#define PEX_DEVICE_AND_VENDOR_ID 0x000
#define PEX_CFG_DIRECT_ACCESS(if, reg) (PEX_IF_REGS_BASE(if) + (reg))
/* PCI Express Configuration Address Register */
#define PXCAR_REG_NUM_OFFS 2
#define PXCAR_REG_NUM_MAX 0x3f
#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << \
PXCAR_REG_NUM_OFFS)
#define PXCAR_FUNC_NUM_OFFS 8
#define PXCAR_FUNC_NUM_MAX 0x7
#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << \
PXCAR_FUNC_NUM_OFFS)
#define PXCAR_DEVICE_NUM_OFFS 11
#define PXCAR_DEVICE_NUM_MAX 0x1f
#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << \
PXCAR_DEVICE_NUM_OFFS)
#define PXCAR_BUS_NUM_OFFS 16
#define PXCAR_BUS_NUM_MAX 0xff
#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << \
PXCAR_BUS_NUM_OFFS)
#define PXCAR_EXT_REG_NUM_OFFS 24
#define PXCAR_EXT_REG_NUM_MAX 0xf
#define PEX_CFG_ADDR_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18f8)
#define PEX_CFG_DATA_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18fc)
#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
#define PXCAR_REAL_EXT_REG_NUM_MASK (0xf << PXCAR_REAL_EXT_REG_NUM_OFFS)
#define PXCAR_CONFIG_EN BIT(31)
#define PEX_STATUS_AND_COMMAND 0x004
#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */
int hws_pex_config(const struct serdes_map *serdes_map, u8 count);
int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off);
void board_pex_config(void);
#endif