mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
a96ea4d8d5
Use mmc_pwrseq instead of meson_mmc_pwrseq. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
339 lines
8.2 KiB
C
339 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016 Carlo Caione <carlo@caione.org>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <malloc.h>
|
|
#include <pwrseq.h>
|
|
#include <mmc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/log2.h>
|
|
#include "meson_gx_mmc.h"
|
|
|
|
bool meson_gx_mmc_is_compatible(struct udevice *dev,
|
|
enum meson_gx_mmc_compatible family)
|
|
{
|
|
enum meson_gx_mmc_compatible compat = dev_get_driver_data(dev);
|
|
|
|
return compat == family;
|
|
}
|
|
|
|
static inline void *get_regbase(const struct mmc *mmc)
|
|
{
|
|
struct meson_mmc_plat *pdata = mmc->priv;
|
|
|
|
return pdata->regbase;
|
|
}
|
|
|
|
static inline uint32_t meson_read(struct mmc *mmc, int offset)
|
|
{
|
|
return readl(get_regbase(mmc) + offset);
|
|
}
|
|
|
|
static inline void meson_write(struct mmc *mmc, uint32_t val, int offset)
|
|
{
|
|
writel(val, get_regbase(mmc) + offset);
|
|
}
|
|
|
|
static void meson_mmc_config_clock(struct mmc *mmc)
|
|
{
|
|
uint32_t meson_mmc_clk = 0;
|
|
unsigned int clk, clk_src, clk_div;
|
|
|
|
if (!mmc->clock)
|
|
return;
|
|
|
|
/* TOFIX This should use the proper clock taken from DT */
|
|
|
|
/* 1GHz / CLK_MAX_DIV = 15,9 MHz */
|
|
if (mmc->clock > 16000000) {
|
|
clk = SD_EMMC_CLKSRC_DIV2;
|
|
clk_src = CLK_SRC_DIV2;
|
|
} else {
|
|
clk = SD_EMMC_CLKSRC_24M;
|
|
clk_src = CLK_SRC_24M;
|
|
}
|
|
clk_div = DIV_ROUND_UP(clk, mmc->clock);
|
|
|
|
/*
|
|
* SM1 SoCs doesn't work fine over 50MHz with CLK_CO_PHASE_180
|
|
* If CLK_CO_PHASE_270 is used, it's more stable than other.
|
|
* Other SoCs use CLK_CO_PHASE_180 by default.
|
|
* It needs to find what is a proper value about each SoCs.
|
|
*/
|
|
if (meson_gx_mmc_is_compatible(mmc->dev, MMC_COMPATIBLE_SM1))
|
|
meson_mmc_clk |= CLK_CO_PHASE_270;
|
|
else
|
|
meson_mmc_clk |= CLK_CO_PHASE_180;
|
|
|
|
/* 180 phase tx clock */
|
|
meson_mmc_clk |= CLK_TX_PHASE_000;
|
|
|
|
/* clock settings */
|
|
meson_mmc_clk |= clk_src;
|
|
meson_mmc_clk |= clk_div;
|
|
|
|
meson_write(mmc, meson_mmc_clk, MESON_SD_EMMC_CLOCK);
|
|
}
|
|
|
|
static int meson_dm_mmc_set_ios(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
uint32_t meson_mmc_cfg;
|
|
|
|
meson_mmc_config_clock(mmc);
|
|
|
|
meson_mmc_cfg = meson_read(mmc, MESON_SD_EMMC_CFG);
|
|
|
|
meson_mmc_cfg &= ~CFG_BUS_WIDTH_MASK;
|
|
if (mmc->bus_width == 1)
|
|
meson_mmc_cfg |= CFG_BUS_WIDTH_1;
|
|
else if (mmc->bus_width == 4)
|
|
meson_mmc_cfg |= CFG_BUS_WIDTH_4;
|
|
else if (mmc->bus_width == 8)
|
|
meson_mmc_cfg |= CFG_BUS_WIDTH_8;
|
|
else
|
|
return -EINVAL;
|
|
|
|
/* 512 bytes block length */
|
|
meson_mmc_cfg &= ~CFG_BL_LEN_MASK;
|
|
meson_mmc_cfg |= CFG_BL_LEN_512;
|
|
|
|
/* Response timeout 256 clk */
|
|
meson_mmc_cfg &= ~CFG_RESP_TIMEOUT_MASK;
|
|
meson_mmc_cfg |= CFG_RESP_TIMEOUT_256;
|
|
|
|
/* Command-command gap 16 clk */
|
|
meson_mmc_cfg &= ~CFG_RC_CC_MASK;
|
|
meson_mmc_cfg |= CFG_RC_CC_16;
|
|
|
|
meson_write(mmc, meson_mmc_cfg, MESON_SD_EMMC_CFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void meson_mmc_setup_cmd(struct mmc *mmc, struct mmc_data *data,
|
|
struct mmc_cmd *cmd)
|
|
{
|
|
uint32_t meson_mmc_cmd = 0, cfg;
|
|
|
|
meson_mmc_cmd |= cmd->cmdidx << CMD_CFG_CMD_INDEX_SHIFT;
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
meson_mmc_cmd |= CMD_CFG_RESP_128;
|
|
|
|
if (cmd->resp_type & MMC_RSP_BUSY)
|
|
meson_mmc_cmd |= CMD_CFG_R1B;
|
|
|
|
if (!(cmd->resp_type & MMC_RSP_CRC))
|
|
meson_mmc_cmd |= CMD_CFG_RESP_NOCRC;
|
|
} else {
|
|
meson_mmc_cmd |= CMD_CFG_NO_RESP;
|
|
}
|
|
|
|
if (data) {
|
|
cfg = meson_read(mmc, MESON_SD_EMMC_CFG);
|
|
cfg &= ~CFG_BL_LEN_MASK;
|
|
cfg |= ilog2(data->blocksize) << CFG_BL_LEN_SHIFT;
|
|
meson_write(mmc, cfg, MESON_SD_EMMC_CFG);
|
|
|
|
if (data->flags == MMC_DATA_WRITE)
|
|
meson_mmc_cmd |= CMD_CFG_DATA_WR;
|
|
|
|
meson_mmc_cmd |= CMD_CFG_DATA_IO | CMD_CFG_BLOCK_MODE |
|
|
data->blocks;
|
|
}
|
|
|
|
meson_mmc_cmd |= CMD_CFG_TIMEOUT_4S | CMD_CFG_OWNER |
|
|
CMD_CFG_END_OF_CHAIN;
|
|
|
|
meson_write(mmc, meson_mmc_cmd, MESON_SD_EMMC_CMD_CFG);
|
|
}
|
|
|
|
static void meson_mmc_setup_addr(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
struct meson_mmc_plat *pdata = mmc->priv;
|
|
unsigned int data_size;
|
|
uint32_t data_addr = 0;
|
|
|
|
if (data) {
|
|
data_size = data->blocks * data->blocksize;
|
|
|
|
if (data->flags == MMC_DATA_READ) {
|
|
data_addr = (ulong) data->dest;
|
|
invalidate_dcache_range(data_addr,
|
|
data_addr + data_size);
|
|
} else {
|
|
pdata->w_buf = calloc(data_size, sizeof(char));
|
|
data_addr = (ulong) pdata->w_buf;
|
|
memcpy(pdata->w_buf, data->src, data_size);
|
|
flush_dcache_range(data_addr, data_addr + data_size);
|
|
}
|
|
}
|
|
|
|
meson_write(mmc, data_addr, MESON_SD_EMMC_CMD_DAT);
|
|
}
|
|
|
|
static void meson_mmc_read_response(struct mmc *mmc, struct mmc_cmd *cmd)
|
|
{
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP3);
|
|
cmd->response[1] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP2);
|
|
cmd->response[2] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP1);
|
|
cmd->response[3] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP);
|
|
} else {
|
|
cmd->response[0] = meson_read(mmc, MESON_SD_EMMC_CMD_RSP);
|
|
}
|
|
}
|
|
|
|
static int meson_dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct meson_mmc_plat *pdata = mmc->priv;
|
|
uint32_t status;
|
|
ulong start;
|
|
int ret = 0;
|
|
|
|
/* max block size supported by chip is 512 byte */
|
|
if (data && data->blocksize > 512)
|
|
return -EINVAL;
|
|
|
|
meson_mmc_setup_cmd(mmc, data, cmd);
|
|
meson_mmc_setup_addr(mmc, data);
|
|
|
|
meson_write(mmc, cmd->cmdarg, MESON_SD_EMMC_CMD_ARG);
|
|
|
|
/* use 10s timeout */
|
|
start = get_timer(0);
|
|
do {
|
|
status = meson_read(mmc, MESON_SD_EMMC_STATUS);
|
|
} while(!(status & STATUS_END_OF_CHAIN) && get_timer(start) < 10000);
|
|
|
|
if (!(status & STATUS_END_OF_CHAIN))
|
|
ret = -ETIMEDOUT;
|
|
else if (status & STATUS_RESP_TIMEOUT)
|
|
ret = -ETIMEDOUT;
|
|
else if (status & STATUS_ERR_MASK)
|
|
ret = -EIO;
|
|
|
|
meson_mmc_read_response(mmc, cmd);
|
|
|
|
if (data && data->flags == MMC_DATA_WRITE)
|
|
free(pdata->w_buf);
|
|
|
|
/* reset status bits */
|
|
meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dm_mmc_ops meson_dm_mmc_ops = {
|
|
.send_cmd = meson_dm_mmc_send_cmd,
|
|
.set_ios = meson_dm_mmc_set_ios,
|
|
};
|
|
|
|
static int meson_mmc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct meson_mmc_plat *pdata = dev_get_plat(dev);
|
|
fdt_addr_t addr;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
pdata->regbase = (void *)addr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_mmc_probe(struct udevice *dev)
|
|
{
|
|
struct meson_mmc_plat *pdata = dev_get_plat(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct mmc *mmc = &pdata->mmc;
|
|
struct mmc_config *cfg = &pdata->cfg;
|
|
struct clk_bulk clocks;
|
|
uint32_t val;
|
|
int ret;
|
|
|
|
/* Enable the clocks feeding the MMC controller */
|
|
ret = clk_get_bulk(dev, &clocks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable_bulk(&clocks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |
|
|
MMC_VDD_31_32 | MMC_VDD_165_195;
|
|
cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
|
|
MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
|
|
cfg->f_max = 100000000; /* 100 MHz */
|
|
cfg->b_max = 511; /* max 512 - 1 blocks */
|
|
cfg->name = dev->name;
|
|
|
|
mmc->priv = pdata;
|
|
upriv->mmc = mmc;
|
|
|
|
mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
|
|
|
|
#ifdef CONFIG_MMC_PWRSEQ
|
|
/* Enable power if needed */
|
|
ret = mmc_pwrseq_get_power(dev, cfg);
|
|
if (!ret) {
|
|
ret = pwrseq_set_power(cfg->pwr_dev, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/* reset all status bits */
|
|
meson_write(mmc, STATUS_MASK, MESON_SD_EMMC_STATUS);
|
|
|
|
/* disable interrupts */
|
|
meson_write(mmc, 0, MESON_SD_EMMC_IRQ_EN);
|
|
|
|
/* enable auto clock mode */
|
|
val = meson_read(mmc, MESON_SD_EMMC_CFG);
|
|
val &= ~CFG_SDCLK_ALWAYS_ON;
|
|
val |= CFG_AUTO_CLK;
|
|
meson_write(mmc, val, MESON_SD_EMMC_CFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int meson_mmc_bind(struct udevice *dev)
|
|
{
|
|
struct meson_mmc_plat *pdata = dev_get_plat(dev);
|
|
|
|
return mmc_bind(dev, &pdata->mmc, &pdata->cfg);
|
|
}
|
|
|
|
static const struct udevice_id meson_mmc_match[] = {
|
|
{ .compatible = "amlogic,meson-gx-mmc", .data = MMC_COMPATIBLE_GX },
|
|
{ .compatible = "amlogic,meson-axg-mmc", .data = MMC_COMPATIBLE_GX },
|
|
{ .compatible = "amlogic,meson-sm1-mmc", .data = MMC_COMPATIBLE_SM1 },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_mmc) = {
|
|
.name = "meson_gx_mmc",
|
|
.id = UCLASS_MMC,
|
|
.of_match = meson_mmc_match,
|
|
.ops = &meson_dm_mmc_ops,
|
|
.probe = meson_mmc_probe,
|
|
.bind = meson_mmc_bind,
|
|
.of_to_plat = meson_mmc_of_to_plat,
|
|
.plat_auto = sizeof(struct meson_mmc_plat),
|
|
};
|