mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
e53979cd34
The Linux i2c driver supports i2c-scl-rising-time-ns, and i2c-scl-falling-time-ns, but U-Boot uses hard-coded values for these values. Update the calculation by fetching them from the device tree if present and use the previous values as the default if they are missing. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
382 lines
10 KiB
C
382 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* drivers/i2c/rcar_i2c.c
|
|
*
|
|
* Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Clock configuration based on Linux i2c-rcar.c:
|
|
* Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com>
|
|
* Copyright (C) 2011-2015 Renesas Electronics Corporation
|
|
* Copyright (C) 2012-14 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <wait_bit.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define RCAR_I2C_ICSCR 0x00 /* slave ctrl */
|
|
#define RCAR_I2C_ICMCR 0x04 /* master ctrl */
|
|
#define RCAR_I2C_ICMCR_MDBS BIT(7) /* non-fifo mode switch */
|
|
#define RCAR_I2C_ICMCR_FSCL BIT(6) /* override SCL pin */
|
|
#define RCAR_I2C_ICMCR_FSDA BIT(5) /* override SDA pin */
|
|
#define RCAR_I2C_ICMCR_OBPC BIT(4) /* override pins */
|
|
#define RCAR_I2C_ICMCR_MIE BIT(3) /* master if enable */
|
|
#define RCAR_I2C_ICMCR_TSBE BIT(2)
|
|
#define RCAR_I2C_ICMCR_FSB BIT(1) /* force stop bit */
|
|
#define RCAR_I2C_ICMCR_ESG BIT(0) /* enable start bit gen */
|
|
#define RCAR_I2C_ICSSR 0x08 /* slave status */
|
|
#define RCAR_I2C_ICMSR 0x0c /* master status */
|
|
#define RCAR_I2C_ICMSR_MASK 0x7f
|
|
#define RCAR_I2C_ICMSR_MNR BIT(6) /* Nack */
|
|
#define RCAR_I2C_ICMSR_MAL BIT(5) /* Arbitration lost */
|
|
#define RCAR_I2C_ICMSR_MST BIT(4) /* Stop */
|
|
#define RCAR_I2C_ICMSR_MDE BIT(3)
|
|
#define RCAR_I2C_ICMSR_MDT BIT(2)
|
|
#define RCAR_I2C_ICMSR_MDR BIT(1)
|
|
#define RCAR_I2C_ICMSR_MAT BIT(0)
|
|
#define RCAR_I2C_ICSIER 0x10 /* slave irq enable */
|
|
#define RCAR_I2C_ICMIER 0x14 /* master irq enable */
|
|
#define RCAR_I2C_ICCCR 0x18 /* clock dividers */
|
|
#define RCAR_I2C_ICCCR_SCGD_OFF 3
|
|
#define RCAR_I2C_ICSAR 0x1c /* slave address */
|
|
#define RCAR_I2C_ICMAR 0x20 /* master address */
|
|
#define RCAR_I2C_ICRXD_ICTXD 0x24 /* data port */
|
|
/*
|
|
* First Bit Setup Cycle (Gen3).
|
|
* Defines 1st bit delay between SDA and SCL.
|
|
*/
|
|
#define RCAR_I2C_ICFBSCR 0x38
|
|
#define RCAR_I2C_ICFBSCR_TCYC17 0x0f /* 17*Tcyc */
|
|
|
|
|
|
enum rcar_i2c_type {
|
|
RCAR_I2C_TYPE_GEN2,
|
|
RCAR_I2C_TYPE_GEN3,
|
|
};
|
|
|
|
struct rcar_i2c_priv {
|
|
void __iomem *base;
|
|
struct clk clk;
|
|
u32 fall_ns;
|
|
u32 rise_ns;
|
|
u32 intdelay;
|
|
u32 icccr;
|
|
enum rcar_i2c_type type;
|
|
};
|
|
|
|
static int rcar_i2c_finish(struct udevice *dev)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR, RCAR_I2C_ICMSR_MST,
|
|
true, 10, true);
|
|
|
|
writel(0, priv->base + RCAR_I2C_ICSSR);
|
|
writel(0, priv->base + RCAR_I2C_ICMSR);
|
|
writel(0, priv->base + RCAR_I2C_ICMCR);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rcar_i2c_recover(struct udevice *dev)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
u32 mcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_OBPC;
|
|
u32 mcra = mcr | RCAR_I2C_ICMCR_FSDA;
|
|
int i;
|
|
u32 mstat;
|
|
|
|
/* Send 9 SCL pulses */
|
|
for (i = 0; i < 9; i++) {
|
|
writel(mcra | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
|
|
udelay(5);
|
|
writel(mcra, priv->base + RCAR_I2C_ICMCR);
|
|
udelay(5);
|
|
}
|
|
|
|
/* Send stop condition */
|
|
udelay(5);
|
|
writel(mcra, priv->base + RCAR_I2C_ICMCR);
|
|
udelay(5);
|
|
writel(mcr, priv->base + RCAR_I2C_ICMCR);
|
|
udelay(5);
|
|
writel(mcr | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
|
|
udelay(5);
|
|
writel(mcra | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR);
|
|
udelay(5);
|
|
|
|
mstat = readl(priv->base + RCAR_I2C_ICMSR);
|
|
return mstat & RCAR_I2C_ICMCR_FSDA ? -EBUSY : 0;
|
|
}
|
|
|
|
static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
u32 mask = RCAR_I2C_ICMSR_MAT |
|
|
(read ? RCAR_I2C_ICMSR_MDR : RCAR_I2C_ICMSR_MDE);
|
|
int ret;
|
|
|
|
writel(0, priv->base + RCAR_I2C_ICMIER);
|
|
writel(RCAR_I2C_ICMCR_MDBS, priv->base + RCAR_I2C_ICMCR);
|
|
writel(0, priv->base + RCAR_I2C_ICMSR);
|
|
writel(priv->icccr, priv->base + RCAR_I2C_ICCCR);
|
|
|
|
/* Wait for the bus */
|
|
ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMCR,
|
|
RCAR_I2C_ICMCR_FSDA, false, 2, true);
|
|
if (ret) {
|
|
if (rcar_i2c_recover(dev)) {
|
|
dev_err(dev, "Bus busy, aborting\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
writel((chip << 1) | read, priv->base + RCAR_I2C_ICMAR);
|
|
/* Reset */
|
|
writel(RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE | RCAR_I2C_ICMCR_ESG,
|
|
priv->base + RCAR_I2C_ICMCR);
|
|
/* Clear Status */
|
|
writel(0, priv->base + RCAR_I2C_ICMSR);
|
|
|
|
ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR, mask,
|
|
true, 100, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check NAK */
|
|
if (readl(priv->base + RCAR_I2C_ICMSR) & RCAR_I2C_ICMSR_MNR)
|
|
return -EREMOTEIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_i2c_read_common(struct udevice *dev, struct i2c_msg *msg)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
u32 icmcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE;
|
|
int i, ret = -EREMOTEIO;
|
|
|
|
for (i = 0; i < msg->len; i++) {
|
|
if (msg->len - 1 == i)
|
|
icmcr |= RCAR_I2C_ICMCR_FSB;
|
|
|
|
writel(icmcr, priv->base + RCAR_I2C_ICMCR);
|
|
writel((u32)~RCAR_I2C_ICMSR_MDR, priv->base + RCAR_I2C_ICMSR);
|
|
|
|
ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR,
|
|
RCAR_I2C_ICMSR_MDR, true, 100, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msg->buf[i] = readl(priv->base + RCAR_I2C_ICRXD_ICTXD) & 0xff;
|
|
}
|
|
|
|
writel((u32)~RCAR_I2C_ICMSR_MDR, priv->base + RCAR_I2C_ICMSR);
|
|
|
|
return rcar_i2c_finish(dev);
|
|
}
|
|
|
|
static int rcar_i2c_write_common(struct udevice *dev, struct i2c_msg *msg)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
u32 icmcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_MIE;
|
|
int i, ret = -EREMOTEIO;
|
|
|
|
for (i = 0; i < msg->len; i++) {
|
|
writel(msg->buf[i], priv->base + RCAR_I2C_ICRXD_ICTXD);
|
|
writel(icmcr, priv->base + RCAR_I2C_ICMCR);
|
|
writel((u32)~RCAR_I2C_ICMSR_MDE, priv->base + RCAR_I2C_ICMSR);
|
|
|
|
ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMSR,
|
|
RCAR_I2C_ICMSR_MDE, true, 100, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
writel((u32)~RCAR_I2C_ICMSR_MDE, priv->base + RCAR_I2C_ICMSR);
|
|
icmcr |= RCAR_I2C_ICMCR_FSB;
|
|
writel(icmcr, priv->base + RCAR_I2C_ICMCR);
|
|
|
|
return rcar_i2c_finish(dev);
|
|
}
|
|
|
|
static int rcar_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
int ret;
|
|
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
ret = rcar_i2c_set_addr(dev, msg->addr, !!(msg->flags & I2C_M_RD));
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = rcar_i2c_read_common(dev, msg);
|
|
else
|
|
ret = rcar_i2c_write_common(dev, msg);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_i2c_probe_chip(struct udevice *dev, uint addr, uint flags)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
/* Ignore address 0, slave address */
|
|
if (addr == 0)
|
|
return -EINVAL;
|
|
|
|
ret = rcar_i2c_set_addr(dev, addr, 1);
|
|
writel(0, priv->base + RCAR_I2C_ICMSR);
|
|
return ret;
|
|
}
|
|
|
|
static int rcar_i2c_set_speed(struct udevice *dev, uint bus_freq_hz)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
u32 scgd, cdf, round, ick, sum, scl;
|
|
unsigned long rate;
|
|
|
|
/*
|
|
* calculate SCL clock
|
|
* see
|
|
* ICCCR
|
|
*
|
|
* ick = clkp / (1 + CDF)
|
|
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
|
|
*
|
|
* ick : I2C internal clock < 20 MHz
|
|
* ticf : I2C SCL falling time
|
|
* tr : I2C SCL rising time
|
|
* intd : LSI internal delay
|
|
* clkp : peripheral_clk
|
|
* F[] : integer up-valuation
|
|
*/
|
|
rate = clk_get_rate(&priv->clk);
|
|
cdf = rate / 20000000;
|
|
if (cdf >= 8) {
|
|
dev_err(dev, "Input clock %lu too high\n", rate);
|
|
return -EIO;
|
|
}
|
|
ick = rate / (cdf + 1);
|
|
|
|
/*
|
|
* it is impossible to calculate large scale
|
|
* number on u32. separate it
|
|
*
|
|
* F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd)
|
|
* = F[sum * ick / 1000000000]
|
|
* = F[(ick / 1000000) * sum / 1000]
|
|
*/
|
|
sum = priv->fall_ns + priv->rise_ns + priv->intdelay;
|
|
round = (ick + 500000) / 1000000 * sum;
|
|
round = (round + 500) / 1000;
|
|
|
|
/*
|
|
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
|
|
*
|
|
* Calculation result (= SCL) should be less than
|
|
* bus_speed for hardware safety
|
|
*
|
|
* We could use something along the lines of
|
|
* div = ick / (bus_speed + 1) + 1;
|
|
* scgd = (div - 20 - round + 7) / 8;
|
|
* scl = ick / (20 + (scgd * 8) + round);
|
|
* (not fully verified) but that would get pretty involved
|
|
*/
|
|
for (scgd = 0; scgd < 0x40; scgd++) {
|
|
scl = ick / (20 + (scgd * 8) + round);
|
|
if (scl <= bus_freq_hz)
|
|
goto scgd_find;
|
|
}
|
|
dev_err(dev, "it is impossible to calculate best SCL\n");
|
|
return -EIO;
|
|
|
|
scgd_find:
|
|
dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
|
|
scl, bus_freq_hz, clk_get_rate(&priv->clk), round, cdf, scgd);
|
|
|
|
priv->icccr = (scgd << RCAR_I2C_ICCCR_SCGD_OFF) | cdf;
|
|
writel(priv->icccr, priv->base + RCAR_I2C_ICCCR);
|
|
|
|
if (priv->type == RCAR_I2C_TYPE_GEN3) {
|
|
/* Set SCL/SDA delay */
|
|
writel(RCAR_I2C_ICFBSCR_TCYC17, priv->base + RCAR_I2C_ICFBSCR);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct rcar_i2c_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->base = dev_read_addr_ptr(dev);
|
|
priv->rise_ns = dev_read_u32_default(dev,
|
|
"i2c-scl-rising-time-ns", 200);
|
|
priv->fall_ns = dev_read_u32_default(dev,
|
|
"i2c-scl-falling-time-ns", 35);
|
|
priv->intdelay = dev_read_u32_default(dev,
|
|
"i2c-scl-internal-delay-ns", 5);
|
|
priv->type = dev_get_driver_data(dev);
|
|
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* reset slave mode */
|
|
writel(0, priv->base + RCAR_I2C_ICSIER);
|
|
writel(0, priv->base + RCAR_I2C_ICSAR);
|
|
writel(0, priv->base + RCAR_I2C_ICSCR);
|
|
writel(0, priv->base + RCAR_I2C_ICSSR);
|
|
|
|
/* reset master mode */
|
|
writel(0, priv->base + RCAR_I2C_ICMIER);
|
|
writel(0, priv->base + RCAR_I2C_ICMCR);
|
|
writel(0, priv->base + RCAR_I2C_ICMSR);
|
|
writel(0, priv->base + RCAR_I2C_ICMAR);
|
|
|
|
ret = rcar_i2c_set_speed(dev, I2C_SPEED_STANDARD_RATE);
|
|
if (ret)
|
|
clk_disable(&priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dm_i2c_ops rcar_i2c_ops = {
|
|
.xfer = rcar_i2c_xfer,
|
|
.probe_chip = rcar_i2c_probe_chip,
|
|
.set_bus_speed = rcar_i2c_set_speed,
|
|
};
|
|
|
|
static const struct udevice_id rcar_i2c_ids[] = {
|
|
{ .compatible = "renesas,rcar-gen2-i2c", .data = RCAR_I2C_TYPE_GEN2 },
|
|
{ .compatible = "renesas,rcar-gen3-i2c", .data = RCAR_I2C_TYPE_GEN3 },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_rcar) = {
|
|
.name = "i2c_rcar",
|
|
.id = UCLASS_I2C,
|
|
.of_match = rcar_i2c_ids,
|
|
.probe = rcar_i2c_probe,
|
|
.priv_auto = sizeof(struct rcar_i2c_priv),
|
|
.ops = &rcar_i2c_ops,
|
|
};
|