u-boot/arch
Nick Hawkins 4276c9b2aa ARM: hpe: gxp: add core support
The GXP is the HPE BMC SoC that is used in the majority
of current generation HPE servers. Traditionally the asic will
last multiple generations of server before being replaced.

Info about SoC:

HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC
features at HPE. It supports ARMv7 architecture based on the Cortex A9
core. It is capable of using an AXI bus to whicha memory controller is
attached. It has multiple SPI interfaces to connect boot flash and BIOS
flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple
i2c engines to drive connectivity with a host infrastructure. There
currently are no public specifications but this process is being worked.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
2022-06-22 21:30:04 -04:00
..
arc Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h 2022-06-06 12:09:19 -04:00
arm ARM: hpe: gxp: add core support 2022-06-22 21:30:04 -04:00
m68k m68k: Remove dead code 2022-06-06 12:09:12 -04:00
microblaze Convert CONFIG_SPL_STACK to Kconfig 2022-06-06 12:09:27 -04:00
mips spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it 2022-06-06 12:09:29 -04:00
nios2 event: Convert arch_cpu_init_dm() to use events 2022-03-10 08:28:36 -05:00
powerpc powerpc: bootm: Fix sizes in memory adjusting warning 2022-06-20 15:52:45 +08:00
riscv Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h 2022-06-06 12:09:19 -04:00
sandbox test: Load mac address using misc device 2022-06-08 14:00:22 -04:00
sh Split CONFIG_CC_OPTIMIZE_FOR_SIZE into two configs 2022-03-25 13:35:50 -04:00
x86 serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
xtensa Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig 2022-03-03 16:51:19 -05:00
.gitignore
Kconfig powerpc: mpc85xx: Set default SYS_IMMR value for P1/P2 CPUs 2022-06-20 09:18:26 +08:00
u-boot-elf.lds