mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
cb04db155f
A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: Tom Rini <trini@konsulko.com>
214 lines
5.7 KiB
C
214 lines
5.7 KiB
C
/*
|
|
* U-Boot - Configuration file for BF533 STAMP board
|
|
*/
|
|
|
|
#ifndef __CONFIG_BF533_STAMP_H__
|
|
#define __CONFIG_BF533_STAMP_H__
|
|
|
|
#include <asm/config-pre.h>
|
|
|
|
/*
|
|
* Processor Settings
|
|
*/
|
|
#define CONFIG_BFIN_CPU bf533-0.3
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
/*
|
|
* Clock Settings
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
*/
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 11059200
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
/* 1 = CLKIN / 2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
/* 1 = bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
#define CONFIG_VCO_MULT 45
|
|
/* CCLK_DIV controls the core clock divider */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* SCLK_DIV controls the system clock divider */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 6 /* note: 1.2 boards can go faster */
|
|
|
|
/*
|
|
* Memory Settings
|
|
*/
|
|
#define CONFIG_MEM_ADD_WDTH 11
|
|
#define CONFIG_MEM_SIZE 128
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x268
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x911109
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
|
|
|
|
/*
|
|
* Network Settings
|
|
*/
|
|
#define ADI_CMDS_NETWORK 1
|
|
#define CONFIG_SMC91111 1
|
|
#define CONFIG_SMC91111_BASE 0x20300300
|
|
#define SMC91111_EEPROM_INIT() \
|
|
do { \
|
|
bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0); \
|
|
bfin_write_FIO_FLAG_C(PF1); \
|
|
bfin_write_FIO_FLAG_S(PF0); \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define CONFIG_HOSTNAME bf533-stamp
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
|
|
/*
|
|
* Software (bit-bang) I2C driver configuration
|
|
*/
|
|
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
|
|
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
|
|
|
|
/*
|
|
* Flash Settings
|
|
*/
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_CFI_AMD_RESET
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 67
|
|
|
|
/*
|
|
* SPI Settings
|
|
*/
|
|
#define CONFIG_BFIN_SPI
|
|
#define CONFIG_ENV_SPI_MAX_HZ 30000000
|
|
/*
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
#define CONFIG_SPI_FLASH_ALL
|
|
*/
|
|
|
|
/*
|
|
* Env Storage Settings
|
|
*/
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x10000
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#endif
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
|
|
#define ENV_IS_EMBEDDED
|
|
#else
|
|
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
|
|
#endif
|
|
#ifdef ENV_IS_EMBEDDED
|
|
/* WARNING - the following is hand-optimized to fit within
|
|
* the sector before the environment sector. If it throws
|
|
* an error during compilation remove an object here to get
|
|
* it linked after the configuration sector.
|
|
*/
|
|
# define LDS_BOARD_TEXT \
|
|
arch/blackfin/lib/built-in.o (.text*); \
|
|
arch/blackfin/cpu/built-in.o (.text*); \
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
|
common/env_embedded.o (.text*);
|
|
#endif
|
|
|
|
/*
|
|
* I2C Settings
|
|
*/
|
|
#define CONFIG_SYS_I2C_SOFT
|
|
#ifdef CONFIG_SYS_I2C_SOFT
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
|
|
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
|
|
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
|
|
#endif
|
|
|
|
/*
|
|
* Compact Flash / IDE / ATA Settings
|
|
*/
|
|
|
|
/* Enabled below option for CF support */
|
|
/* #define CONFIG_STAMP_CF */
|
|
#if defined(CONFIG_STAMP_CF)
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#undef CONFIG_IDE_RESET /* no reset for ide supported */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1)
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x20200000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0007 /* alternate registers */
|
|
|
|
#define CONFIG_SYS_ATA_STRIDE 2
|
|
|
|
#undef CONFIG_EBIU_AMBCTL1_VAL
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2
|
|
#endif
|
|
|
|
/*
|
|
* Misc Settings
|
|
*/
|
|
#define CONFIG_RTC_BFIN
|
|
#define CONFIG_UART_CONSOLE 0
|
|
|
|
/* FLASH/ETHERNET uses the same async bank */
|
|
#define SHARED_RESOURCES 1
|
|
|
|
/* define to enable boot progress via leds */
|
|
/* #define CONFIG_SHOW_BOOT_PROGRESS */
|
|
|
|
/* define to enable run status via led */
|
|
/* #define CONFIG_STATUS_LED */
|
|
#ifdef CONFIG_STATUS_LED
|
|
#define CONFIG_GPIO_LED
|
|
#define CONFIG_BOARD_SPECIFIC_LED
|
|
/* use LED0 to indicate booting/alive */
|
|
#define STATUS_LED_BOOT 0
|
|
#define STATUS_LED_BIT GPIO_PF2
|
|
#define STATUS_LED_STATE STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
|
|
/* use LED1 to indicate crash */
|
|
#define STATUS_LED_CRASH 1
|
|
#define STATUS_LED_BIT1 GPIO_PF3
|
|
#define STATUS_LED_STATE1 STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
|
|
/* #define STATUS_LED_BIT2 GPIO_PF4 */
|
|
#endif
|
|
|
|
/* define to enable splash screen support */
|
|
/* #define CONFIG_VIDEO */
|
|
|
|
/*
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
*/
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
#endif
|