u-boot/board/freescale/p1_p2_rdb
Vivek Mahajan 70ed869ea5 ppc/85xx/pci: fsl_pci_init: pcie agent mode support
Originally written by Jason Jin and Mingkai Hu for mpc8536.

When QorIQ based board is configured as a PCIe agent, then unlock/enable
inbound PCI configuration cycles and init a 4K inbound memory window;
so that a PCIe host can access the PCIe agents SDRAM at address 0x0

* Supported in fsl_pci_init_port() after adding pcie_ep as a param
* Revamped copyright in drivers/pci/fsl_pci_init.c
* Mods in 85xx based board specific pci init after this change

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-27 09:33:51 -05:00
..
config.mk ppc/P1_P2_RDB: On-chip BootROM support 2009-10-16 10:21:39 -05:00
ddr.c 85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate 2009-10-27 09:12:36 -05:00
law.c ppc/85xx: Clean up use of LAWAR defines 2009-09-24 12:04:58 -05:00
Makefile 85xx: Added PCIe support for P1 P2 RDB 2009-08-28 17:12:46 -05:00
p1_p2_rdb.c 85xx: Add support for P2020RDB board 2009-08-28 17:12:38 -05:00
pci.c ppc/85xx/pci: fsl_pci_init: pcie agent mode support 2009-10-27 09:33:51 -05:00
tlb.c ppc/P1_P2_RDB: NAND Boot Support 2009-10-16 10:21:39 -05:00