Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 14:23:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/genesi/mx51_efikamx/efikamx.c
Nikita Kiryanov 155fa9af95 spi: mxc: fix sf probe when using mxc_spi 
MXC SPI driver has a feature whereas a GPIO line can be used to force CS high
across multiple transactions. This is set up by embedding the GPIO information
in the CS value:

cs = (cs | gpio << 8)

This merge of cs and gpio data into one value breaks the sf probe command:
if the use of gpio is required, invoking "sf probe <cs>" will not work, because
the CS argument doesn't have the GPIO information in it. Instead, the user must
use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force
cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must
type "sf probe 15872".

This is inconsistent with the description of the sf probe command, and forces
the user to be aware of implementaiton details.

Fix this by introducing a new board function: board_spi_cs_gpio(), which will
accept a naked CS value, and provide the driver with the relevant GPIO, if one
is necessary.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Eric Benard <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-24 17:25:39 +05:30

508 lines
12 KiB
C
Raw Blame History

/*
* Copyright (C) 2009 Freescale Semiconductor, Inc.
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
* Copyright (C) 2009-2012 Genesi USA, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Compile-time error checking
*/
#ifndef CONFIG_MXC_SPI
#error "CONFIG_MXC_SPI not set, this is essential for board's operation!"
#endif
/*
* Board revisions
*
* Note that we get these revisions here for convenience, but we only set
* up for the production model Smarttop (1.3) and Smartbook (2.0).
*
*/
#define EFIKAMX_BOARD_REV_11 0x1
#define EFIKAMX_BOARD_REV_12 0x2
#define EFIKAMX_BOARD_REV_13 0x3
#define EFIKAMX_BOARD_REV_14 0x4
#define EFIKASB_BOARD_REV_13 0x1
#define EFIKASB_BOARD_REV_20 0x2
/*
* Board identification
*/
static u32 get_mx_rev(void)
{
u32 rev = 0;
/*
* Retrieve board ID:
*
* gpio: 16 17 11
* ==============
* r1.1: 1+ 1 1
* r1.2: 1 1 0
* r1.3: 1 0 1
* r1.4: 1 0 0
*
* + note: r1.1 does not strap this pin properly so it needs to
* be hacked or ignored.
*/
/* set to 1 in order to get correct value on board rev 1.1 */
gpio_direction_output(IMX_GPIO_NR(3, 16), 1);
gpio_direction_input(IMX_GPIO_NR(3, 11));
gpio_direction_input(IMX_GPIO_NR(3, 16));
gpio_direction_input(IMX_GPIO_NR(3, 17));
rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0;
rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1;
rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2;
return (~rev & 0x7) + 1;
}
static iomux_v3_cfg_t const efikasb_revision_pads[] = {
MX51_PAD_EIM_CS3__GPIO2_28,
MX51_PAD_EIM_CS4__GPIO2_29,
};
static inline u32 get_sb_rev(void)
{
u32 rev = 0;
imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads,
ARRAY_SIZE(efikasb_revision_pads));
gpio_direction_input(IMX_GPIO_NR(2, 28));
gpio_direction_input(IMX_GPIO_NR(2, 29));
rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0;
rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1;
return rev;
}
inline uint32_t get_efikamx_rev(void)
{
if (machine_is_efikamx())
return get_mx_rev();
else if (machine_is_efikasb())
return get_sb_rev();
}
u32 get_board_rev(void)
{
return get_cpu_rev() | (get_efikamx_rev() << 8);
}
/*
* DRAM initialization
*/
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
/*
* UART configuration
*/
static iomux_v3_cfg_t const efikamx_uart_pads[] = {
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
MX51_PAD_UART1_CTS__UART1_CTS,
};
/*
* SPI configuration
*/
static iomux_v3_cfg_t const efikamx_spi_pads[] = {
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
MX51_PAD_CSPI1_SS0__GPIO4_24,
MX51_PAD_CSPI1_SS1__GPIO4_25,
MX51_PAD_GPIO1_6__GPIO1_6,
};
#define EFIKAMX_SPI_SS0 IMX_GPIO_NR(4, 24)
#define EFIKAMX_SPI_SS1 IMX_GPIO_NR(4, 25)
#define EFIKAMX_PMIC_IRQ IMX_GPIO_NR(1, 6)
/*
* PMIC configuration
*/
#ifdef CONFIG_MXC_SPI
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
return (bus == 0 && cs == 1) ? 121 : -1;
}
static void power_init(void)
{
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
int ret;
ret = pmic_init(CONFIG_FSL_PMIC_BUS);
if (ret)
return;
p = pmic_get("FSL_PMIC");
if (!p)
return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
val &= ~PWGT2SPIEN;
pmic_reg_write(p, REG_POWER_MISC, val);
/* Externally powered */
pmic_reg_read(p, REG_CHARGE, &val);
val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
pmic_reg_write(p, REG_CHARGE, val);
/* power up the system first */
pmic_reg_write(p, REG_POWER_MISC, PWUP);
/* Set core voltage to 1.1V */
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
pmic_reg_write(p, REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
pmic_reg_write(p, REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
pmic_reg_read(p, REG_SW_2, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
pmic_reg_write(p, REG_SW_2, val);
udelay(50);
/* Raise the core frequency to 800MHz */
writel(0x0, &mxc_ccm->cacrr);
/* Set switchers in Auto in NORMAL mode & STANDBY mode */
/* Setup the switcher mode for SW1 & SW2*/
pmic_reg_read(p, REG_SW_4, &val);
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
(SWMODE_MASK << SWMODE2_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
pmic_reg_write(p, REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
pmic_reg_read(p, REG_SW_5, &val);
val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
(SWMODE_MASK << SWMODE4_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
pmic_reg_write(p, REG_SW_5, val);
/* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */
pmic_reg_read(p, REG_SETTING_0, &val);
val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6;
pmic_reg_write(p, REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
pmic_reg_read(p, REG_SETTING_1, &val);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15;
pmic_reg_write(p, REG_SETTING_1, val);
/* Enable VGEN1, VGEN2, VDIG, VPLL */
pmic_reg_read(p, REG_MODE_0, &val);
val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN;
pmic_reg_write(p, REG_MODE_0, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
pmic_reg_write(p, REG_MODE_1, val);
udelay(200);
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
VVIDEOEN | VAUDIOEN | VSDEN;
pmic_reg_write(p, REG_MODE_1, val);
pmic_reg_read(p, REG_POWER_CTL2, &val);
val |= WDIRESET;
pmic_reg_write(p, REG_POWER_CTL2, val);
udelay(2500);
}
#else
static inline void power_init(void) { }
#endif
/*
* MMC configuration
*/
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[2] = {
{MMC_SDHC1_BASE_ADDR},
{MMC_SDHC2_BASE_ADDR},
};
static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
MX51_PAD_SD1_CMD__SD1_CMD,
MX51_PAD_SD1_CLK__SD1_CLK,
MX51_PAD_SD1_DATA0__SD1_DATA0,
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
MX51_PAD_GPIO1_1__SD1_WP,
};
#define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1)
static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
MX51_PAD_GPIO1_0__SD1_CD,
NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL),
};
#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0)
#define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27)
static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = {
MX51_PAD_SD2_CMD__SD2_CMD,
MX51_PAD_SD2_CLK__SD2_CLK,
MX51_PAD_SD2_DATA0__SD2_DATA0,
MX51_PAD_SD2_DATA1__SD2_DATA1,
MX51_PAD_SD2_DATA2__SD2_DATA2,
MX51_PAD_SD2_DATA3__SD2_DATA3,
MX51_PAD_GPIO1_7__SD2_WP,
MX51_PAD_GPIO1_8__SD2_CD,
};
#define EFIKASB_SDHC2_CD IMX_GPIO_NR(1, 8)
#define EFIKASB_SDHC2_WP IMX_GPIO_NR(1, 7)
static inline uint32_t efikamx_mmc_getcd(u32 base)
{
if (base == MMC_SDHC1_BASE_ADDR)
if (machine_is_efikamx())
return EFIKAMX_SDHC1_CD;
else
return EFIKASB_SDHC1_CD;
else
return EFIKASB_SDHC2_CD;
}
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
int ret = !gpio_get_value(cd);
return ret;
}
int board_mmc_init(bd_t *bis)
{
int ret;
/*
* All Efika MX boards use eSDHC1 with a common write-protect GPIO
*/
imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads,
ARRAY_SIZE(efikamx_sdhc1_pads));
gpio_direction_input(EFIKAMX_SDHC1_WP);
/*
* Smartbook and Smarttop differ on the location of eSDHC1
* carrier-detect GPIO
*/
if (machine_is_efikamx()) {
imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
gpio_direction_input(EFIKAMX_SDHC1_CD);
} else if (machine_is_efikasb()) {
imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
gpio_direction_input(EFIKASB_SDHC1_CD);
}
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
if (machine_is_efikasb()) {
imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads,
ARRAY_SIZE(efikasb_sdhc2_pads));
gpio_direction_input(EFIKASB_SDHC2_CD);
gpio_direction_input(EFIKASB_SDHC2_WP);
if (!ret)
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
}
return ret;
}
#endif
/*
* PATA
*/
static iomux_v3_cfg_t const efikamx_pata_pads[] = {
MX51_PAD_NANDF_WE_B__PATA_DIOW,
MX51_PAD_NANDF_RE_B__PATA_DIOR,
MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
MX51_PAD_NANDF_CLE__PATA_RESET_B,
MX51_PAD_NANDF_WP_B__PATA_DMACK,
MX51_PAD_NANDF_RB0__PATA_DMARQ,
MX51_PAD_NANDF_RB1__PATA_IORDY,
MX51_PAD_GPIO_NAND__PATA_INTRQ,
MX51_PAD_NANDF_CS2__PATA_CS_0,
MX51_PAD_NANDF_CS3__PATA_CS_1,
MX51_PAD_NANDF_CS4__PATA_DA_0,
MX51_PAD_NANDF_CS5__PATA_DA_1,
MX51_PAD_NANDF_CS6__PATA_DA_2,
MX51_PAD_NANDF_D15__PATA_DATA15,
MX51_PAD_NANDF_D14__PATA_DATA14,
MX51_PAD_NANDF_D13__PATA_DATA13,
MX51_PAD_NANDF_D12__PATA_DATA12,
MX51_PAD_NANDF_D11__PATA_DATA11,
MX51_PAD_NANDF_D10__PATA_DATA10,
MX51_PAD_NANDF_D9__PATA_DATA9,
MX51_PAD_NANDF_D8__PATA_DATA8,
MX51_PAD_NANDF_D7__PATA_DATA7,
MX51_PAD_NANDF_D6__PATA_DATA6,
MX51_PAD_NANDF_D5__PATA_DATA5,
MX51_PAD_NANDF_D4__PATA_DATA4,
MX51_PAD_NANDF_D3__PATA_DATA3,
MX51_PAD_NANDF_D2__PATA_DATA2,
MX51_PAD_NANDF_D1__PATA_DATA1,
MX51_PAD_NANDF_D0__PATA_DATA0,
};
/*
* EHCI USB
*/
#ifdef CONFIG_CMD_USB
extern void setup_iomux_usb(void);
#else
static inline void setup_iomux_usb(void) { }
#endif
/*
* LED configuration
*
* Smarttop LED pad config is done in the DCD
*
*/
#define EFIKAMX_LED_BLUE IMX_GPIO_NR(3, 13)
#define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14)
#define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15)
static iomux_v3_cfg_t const efikasb_led_pads[] = {
MX51_PAD_GPIO1_3__GPIO1_3,
MX51_PAD_EIM_CS0__GPIO2_25,
};
#define EFIKASB_CAPSLOCK_LED IMX_GPIO_NR(2, 25)
#define EFIKASB_MESSAGE_LED IMX_GPIO_NR(1, 3) /* Note: active low */
/*
* Board initialization
*/
int board_early_init_f(void)
{
if (machine_is_efikasb()) {
imx_iomux_v3_setup_multiple_pads(efikasb_led_pads,
ARRAY_SIZE(efikasb_led_pads));
gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
} else if (machine_is_efikamx()) {
/*
* Set up GPIO directions for LEDs.
* IOMUX has been done in the DCD already.
* Turn the red LED on for pre-relocation code.
*/
gpio_direction_output(EFIKAMX_LED_BLUE, 0);
gpio_direction_output(EFIKAMX_LED_GREEN, 0);
gpio_direction_output(EFIKAMX_LED_RED, 1);
}
/*
* Both these pad configurations for UART and SPI are kind of redundant
* since they are the Power-On Defaults for the i.MX51. But, it seems we
* should make absolutely sure that they are set up correctly.
*/
imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads,
ARRAY_SIZE(efikamx_uart_pads));
imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads,
ARRAY_SIZE(efikamx_spi_pads));
/* not technically required for U-Boot operation but do it anyway. */
gpio_direction_input(EFIKAMX_PMIC_IRQ);
/* Deselect both CS for now, otherwise NOR doesn't probe properly. */
gpio_direction_output(EFIKAMX_SPI_SS0, 0);
gpio_direction_output(EFIKAMX_SPI_SS1, 1);
return 0;
}
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int board_late_init(void)
{
if (machine_is_efikamx()) {
/*
* Set up Blue LED for "In U-Boot" status.
* We're all relocated and ready to U-Boot!
*/
gpio_set_value(EFIKAMX_LED_RED, 0);
gpio_set_value(EFIKAMX_LED_GREEN, 0);
gpio_set_value(EFIKAMX_LED_BLUE, 1);
}
power_init();
imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads,
ARRAY_SIZE(efikamx_pata_pads));
setup_iomux_usb();
return 0;
}
int checkboard(void)
{
u32 rev = get_efikamx_rev();
printf("Board: Genesi Efika MX ");
if (machine_is_efikamx())
printf("Smarttop (1.%i)\n", rev & 0xf);
else if (machine_is_efikasb())
printf("Smartbook\n");
return 0;
}
Reference in a new issue View git blame Copy permalink