Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-01 08:59:33 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/davinci/da8xxevm/omapl138_lcdk.c
Tom Rini 6e7df1d151 global: Finish CONFIG -> CFG migration 
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00

349 lines
8 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* Based on da850evm.c. Original Copyrights follow:
*
* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*/
#include <common.h>
#include <env.h>
#include <i2c.h>
#include <init.h>
#include <net.h>
#include <asm/arch/hardware.h>
#include <asm/global_data.h>
#include <asm/ti-common/davinci_nand.h>
#include <asm/io.h>
#include <ns16550.h>
#include <dm/platdata.h>
#include <linux/errno.h>
#include <asm/mach-types.h>
#include <asm/arch/davinci_misc.h>
#ifdef CONFIG_MMC_DAVINCI
#include <mmc.h>
#include <asm/arch/sdmmc_defs.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
#define pinmux(x) (&davinci_syscfg_regs->pinmux[x])
#ifdef CONFIG_MMC_DAVINCI
/* MMC0 pin muxer settings */
const struct pinmux_config mmc0_pins[] = {
/* GP0[11] is required for SD to work on Rev 3 EVMs */
{ pinmux(0), 8, 4 }, /* GP0[11] */
{ pinmux(10), 2, 0 }, /* MMCSD0_CLK */
{ pinmux(10), 2, 1 }, /* MMCSD0_CMD */
{ pinmux(10), 2, 2 }, /* MMCSD0_DAT_0 */
{ pinmux(10), 2, 3 }, /* MMCSD0_DAT_1 */
{ pinmux(10), 2, 4 }, /* MMCSD0_DAT_2 */
{ pinmux(10), 2, 5 }, /* MMCSD0_DAT_3 */
/* LCDK supports only 4-bit mode, remaining pins are not configured */
};
#endif
/* UART pin muxer settings */
static const struct pinmux_config uart_pins[] = {
{ pinmux(0), 4, 6 },
{ pinmux(0), 4, 7 },
{ pinmux(4), 2, 4 },
{ pinmux(4), 2, 5 }
};
#ifdef CONFIG_DRIVER_TI_EMAC
static const struct pinmux_config emac_pins[] = {
{ pinmux(2), 8, 1 },
{ pinmux(2), 8, 2 },
{ pinmux(2), 8, 3 },
{ pinmux(2), 8, 4 },
{ pinmux(2), 8, 5 },
{ pinmux(2), 8, 6 },
{ pinmux(2), 8, 7 },
{ pinmux(3), 8, 0 },
{ pinmux(3), 8, 1 },
{ pinmux(3), 8, 2 },
{ pinmux(3), 8, 3 },
{ pinmux(3), 8, 4 },
{ pinmux(3), 8, 5 },
{ pinmux(3), 8, 6 },
{ pinmux(3), 8, 7 },
{ pinmux(4), 8, 0 },
{ pinmux(4), 8, 1 }
};
#endif /* CONFIG_DRIVER_TI_EMAC */
/* I2C pin muxer settings */
static const struct pinmux_config i2c_pins[] = {
{ pinmux(4), 2, 2 },
{ pinmux(4), 2, 3 }
};
#ifdef CONFIG_NAND_DAVINCI
const struct pinmux_config nand_pins[] = {
{ pinmux(7), 1, 1 },
{ pinmux(7), 1, 2 },
{ pinmux(7), 1, 4 },
{ pinmux(7), 1, 5 },
{ pinmux(8), 1, 0 },
{ pinmux(8), 1, 1 },
{ pinmux(8), 1, 2 },
{ pinmux(8), 1, 3 },
{ pinmux(8), 1, 4 },
{ pinmux(8), 1, 5 },
{ pinmux(8), 1, 6 },
{ pinmux(8), 1, 7 },
{ pinmux(9), 1, 0 },
{ pinmux(9), 1, 1 },
{ pinmux(9), 1, 2 },
{ pinmux(9), 1, 3 },
{ pinmux(9), 1, 4 },
{ pinmux(9), 1, 5 },
{ pinmux(9), 1, 6 },
{ pinmux(9), 1, 7 },
{ pinmux(12), 1, 5 },
{ pinmux(12), 1, 6 }
};
#endif
#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
#define HAS_RMII 1
#else
#define HAS_RMII 0
#endif
const struct pinmux_resource pinmuxes[] = {
PINMUX_ITEM(uart_pins),
PINMUX_ITEM(i2c_pins),
#ifdef CONFIG_NAND_DAVINCI
PINMUX_ITEM(nand_pins),
#endif
};
const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
{ DAVINCI_LPSC_SPI1 }, /* Serial Flash */
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART2 }, /* console */
{ DAVINCI_LPSC_GPIO },
#ifdef CONFIG_MMC_DAVINCI
{ DAVINCI_LPSC_MMC_SD },
#endif
};
const int lpsc_size = ARRAY_SIZE(lpsc);
#ifndef CFG_DA850_EVM_MAX_CPU_CLK
#define CFG_DA850_EVM_MAX_CPU_CLK 456000000
#endif
int board_early_init_f(void)
{
/*
* Power on required peripherals
* ARM does not have access by default to PSC0 and PSC1
* assuming here that the DSP bootloader has set the IOPU
* such that PSC access is available to ARM
*/
if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
return 1;
return 0;
}
int board_init(void)
{
irq_init();
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_LCDK;
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
/* setup the SUSPSRC for ARM to control emulation suspend */
writel(readl(&davinci_syscfg_regs->suspsrc) &
~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
DAVINCI_SYSCFG_SUSPSRC_UART2),
&davinci_syscfg_regs->suspsrc);
/* configure pinmux settings */
if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
return 1;
#ifdef CONFIG_NAND_DAVINCI
/*
* NAND CS setup - cycle counts based on da850evm NAND timings in the
* Linux kernel @ 25MHz EMIFA
*/
writel((DAVINCI_ABCR_WSETUP(15) |
DAVINCI_ABCR_WSTROBE(63) |
DAVINCI_ABCR_WHOLD(7) |
DAVINCI_ABCR_RSETUP(15) |
DAVINCI_ABCR_RSTROBE(63) |
DAVINCI_ABCR_RHOLD(7) |
DAVINCI_ABCR_TA(3) |
DAVINCI_ABCR_ASIZE_16BIT),
&davinci_emif_regs->ab2cr); /* CS3 */
#endif
#ifdef CONFIG_MMC_DAVINCI
if (davinci_configure_pin_mux(mmc0_pins, ARRAY_SIZE(mmc0_pins)) != 0)
return 1;
#endif
#ifdef CONFIG_DRIVER_TI_EMAC
if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0)
return 1;
davinci_emac_mii_mode_sel(HAS_RMII);
#endif /* CONFIG_DRIVER_TI_EMAC */
/* enable the console UART */
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
DAVINCI_UART_PWREMU_MGMT_UTRST),
&davinci_uart2_ctrl_regs->pwremu_mgmt);
return 0;
}
#define CFG_MAC_ADDR_SPI_BUS 0
#define CFG_MAC_ADDR_SPI_CS 0
#define CFG_MAC_ADDR_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#define CFG_MAC_ADDR_SPI_MODE SPI_MODE_3
#define CFG_MAC_ADDR_OFFSET (flash->size - SZ_64K)
void dsp_lpsc_on(unsigned domain, unsigned int id)
{
dv_reg_p mdstat, mdctl, ptstat, ptcmd;
struct davinci_psc_regs *psc_regs;
psc_regs = davinci_psc0_regs;
mdstat = &psc_regs->psc0.mdstat[id];
mdctl = &psc_regs->psc0.mdctl[id];
ptstat = &psc_regs->ptstat;
ptcmd = &psc_regs->ptcmd;
while (*ptstat & (0x1 << domain))
;
if ((*mdstat & 0x1f) == 0x03)
return; /* Already on and enabled */
*mdctl |= 0x03;
*ptcmd = 0x1 << domain;
while (*ptstat & (0x1 << domain))
;
while ((*mdstat & 0x1f) != 0x03)
; /* Probably an overkill... */
}
static void dspwake(void)
{
unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE;
/* if the device is ARM only, return */
if ((REG(CHIP_REV_ID_REG) & 0x3f) == 0x10)
return;
if (!strcmp(env_get("dspwake"), "no"))
return;
*resetvect++ = 0x1E000; /* DSP Idle */
/* clear out the next 10 words as NOP */
memset(resetvect, 0, sizeof(unsigned) * 10);
/* setup the DSP reset vector */
REG(HOST1CFG) = DAVINCI_L3CBARAM_BASE;
dsp_lpsc_on(1, DAVINCI_LPSC_GEM);
REG(PSC0_MDCTL + (15 * 4)) |= 0x100;
}
#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
/**
* rmii_hw_init
*
*/
int rmii_hw_init(void)
{
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC_USE_RMII */
int misc_init_r(void)
{
#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
/* Select RMII fucntion through the expander */
if (rmii_hw_init())
printf("RMII hardware init failed!!!\n");
#endif
dspwake();
return 0;
}
#if !CONFIG_IS_ENABLED(DM_MMC)
#ifdef CONFIG_MMC_DAVINCI
static struct davinci_mmc mmc_sd0 = {
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
.host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
};
int board_mmc_init(struct bd_info *bis)
{
mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
/* Add slot-0 to mmc subsystem */
return davinci_mmc_init(bis, &mmc_sd0);
}
#endif
#endif
#ifdef CONFIG_SPL_BUILD
static const struct ns16550_plat serial_pdata = {
.base = DAVINCI_UART2_BASE,
.reg_shift = 2,
.clock = 228000000,
.fcr = UART_FCR_DEFVAL,
};
U_BOOT_DRVINFO(omapl138_uart) = {
.name = "ns16550_serial",
.plat = &serial_pdata,
};
static const struct davinci_mmc_plat mmc_plat = {
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
.cfg = {
.f_min = 200000,
.f_max = 25000000,
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
.host_caps = MMC_MODE_4BIT,
.b_max = DAVINCI_MAX_BLOCKS,
.name = "da830-mmc",
},
};
U_BOOT_DRVINFO(omapl138_mmc) = {
.name = "ti_da830_mmc",
.plat = &mmc_plat,
};
void spl_board_init(void)
{
davinci_configure_pin_mux(mmc0_pins, ARRAY_SIZE(mmc0_pins));
}
#endif
Reference in a new issue View git blame Copy permalink