u-boot/arch/x86/cpu/intel_common/cpu.c
Simon Glass 2a605d4d88 x86: Rename PORT_RESET to IO_PORT_RESET
This same name is used in USB. Add a prefix to distinguish it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:24 +08:00

111 lines
2.4 KiB
C

/*
* Copyright (c) 2016 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <asm/cpu_common.h>
#include <asm/intel_regs.h>
#include <asm/lapic.h>
#include <asm/lpc_common.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
#include <asm/post.h>
#include <asm/microcode.h>
DECLARE_GLOBAL_DATA_PTR;
static int report_bist_failure(void)
{
if (gd->arch.bist != 0) {
post_code(POST_BIST_FAILURE);
printf("BIST failed: %08x\n", gd->arch.bist);
return -EFAULT;
}
return 0;
}
int cpu_common_init(void)
{
struct udevice *dev, *lpc;
int ret;
/* Halt if there was a built in self test failure */
ret = report_bist_failure();
if (ret)
return ret;
enable_lapic();
ret = microcode_update_intel();
if (ret && ret != -EEXIST)
return ret;
/* Enable upper 128bytes of CMOS */
writel(1 << 2, RCB_REG(RC));
/* Early chipset init required before RAM init can work */
uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
ret = uclass_first_device(UCLASS_LPC, &lpc);
if (ret)
return ret;
if (!lpc)
return -ENODEV;
/* Cause the SATA device to do its early init */
uclass_first_device(UCLASS_DISK, &dev);
return 0;
}
int cpu_set_flex_ratio_to_tdp_nominal(void)
{
msr_t flex_ratio, msr;
u8 nominal_ratio;
/* Check for Flex Ratio support */
flex_ratio = msr_read(MSR_FLEX_RATIO);
if (!(flex_ratio.lo & FLEX_RATIO_EN))
return -EINVAL;
/* Check for >0 configurable TDPs */
msr = msr_read(MSR_PLATFORM_INFO);
if (((msr.hi >> 1) & 3) == 0)
return -EINVAL;
/* Use nominal TDP ratio for flex ratio */
msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
nominal_ratio = msr.lo & 0xff;
/* See if flex ratio is already set to nominal TDP ratio */
if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio)
return 0;
/* Set flex ratio to nominal TDP ratio */
flex_ratio.lo &= ~0xff00;
flex_ratio.lo |= nominal_ratio << 8;
flex_ratio.lo |= FLEX_RATIO_LOCK;
msr_write(MSR_FLEX_RATIO, flex_ratio);
/* Set flex ratio in soft reset data register bits 11:6 */
clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6,
(nominal_ratio & 0x3f) << 6);
debug("CPU: Soft reset to set up flex ratio\n");
/* Set soft reset control to use register value */
setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1);
/* Issue warm reset, will be "CPU only" due to soft reset data */
outb(0x0, IO_PORT_RESET);
outb(SYS_RST | RST_CPU, IO_PORT_RESET);
cpu_hlt();
/* Not reached */
return -EINVAL;
}