u-boot/drivers/pinctrl/exynos/pinctrl-exynos7420.c
Thomas Abraham 16ca80adc5 pinctrl: Add pinctrl driver support for Exynos7420 SoC
Add pinctrl driver support for Samsung's Exynos7420 SoC. The changes
have been split into Exynos7420 specific and common Exynos specific
portions so that this implementation is reusable on other Exynos
SoCs as well.

The Exynos pinctrl driver supports only device tree based pin
configuration. The bindings used are similar to the ones used in the
linux kernel.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 10:00:18 +09:00

120 lines
3.1 KiB
C

/*
* Exynos7420 pinctrl driver.
* Copyright (C) 2016 Samsung Electronics
* Thomas Abraham <thomas.ab@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <asm/io.h>
#include <dm/pinctrl.h>
#include <dm/root.h>
#include <fdtdec.h>
#include <asm/arch/pinmux.h>
#include "pinctrl-exynos.h"
DECLARE_GLOBAL_DATA_PTR;
#define GPD1_OFFSET 0xc0
static struct exynos_pinctrl_config_data serial2_conf[] = {
{
.offset = GPD1_OFFSET + PIN_CON,
.mask = 0x00ff0000,
.value = 0x00220000,
}, {
.offset = GPD1_OFFSET + PIN_PUD,
.mask = 0x00000f00,
.value = 0x00000f00,
},
};
static int exynos7420_pinctrl_request(struct udevice *dev, int peripheral,
int flags)
{
struct exynos_pinctrl_priv *priv = dev_get_priv(dev);
unsigned long base = priv->base;
switch (PERIPH_ID_UART2) {
case PERIPH_ID_UART2:
exynos_pinctrl_setup_peri(serial2_conf,
ARRAY_SIZE(serial2_conf), base);
break;
default:
return -ENODEV;
}
return 0;
}
static struct pinctrl_ops exynos7420_pinctrl_ops = {
.set_state = exynos_pinctrl_set_state,
.request = exynos7420_pinctrl_request,
};
/* pin banks of Exynos7420 pin-controller - BUS0 */
static const struct samsung_pin_bank_data exynos7420_pin_banks0[] = {
EXYNOS_PIN_BANK(5, 0x000, "gpb0"),
EXYNOS_PIN_BANK(8, 0x020, "gpc0"),
EXYNOS_PIN_BANK(2, 0x040, "gpc1"),
EXYNOS_PIN_BANK(6, 0x060, "gpc2"),
EXYNOS_PIN_BANK(8, 0x080, "gpc3"),
EXYNOS_PIN_BANK(4, 0x0a0, "gpd0"),
EXYNOS_PIN_BANK(6, 0x0c0, "gpd1"),
EXYNOS_PIN_BANK(8, 0x0e0, "gpd2"),
EXYNOS_PIN_BANK(5, 0x100, "gpd4"),
EXYNOS_PIN_BANK(4, 0x120, "gpd5"),
EXYNOS_PIN_BANK(6, 0x140, "gpd6"),
EXYNOS_PIN_BANK(3, 0x160, "gpd7"),
EXYNOS_PIN_BANK(2, 0x180, "gpd8"),
EXYNOS_PIN_BANK(2, 0x1a0, "gpg0"),
EXYNOS_PIN_BANK(4, 0x1c0, "gpg3"),
};
/* pin banks of Exynos7420 pin-controller - FSYS0 */
static const struct samsung_pin_bank_data exynos7420_pin_banks1[] = {
EXYNOS_PIN_BANK(7, 0x000, "gpr4"),
};
/* pin banks of Exynos7420 pin-controller - FSYS1 */
static const struct samsung_pin_bank_data exynos7420_pin_banks2[] = {
EXYNOS_PIN_BANK(4, 0x000, "gpr0"),
EXYNOS_PIN_BANK(8, 0x020, "gpr1"),
EXYNOS_PIN_BANK(5, 0x040, "gpr2"),
EXYNOS_PIN_BANK(8, 0x060, "gpr3"),
};
const struct samsung_pin_ctrl exynos7420_pin_ctrl[] = {
{
/* pin-controller instance BUS0 data */
.pin_banks = exynos7420_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos7420_pin_banks0),
}, {
/* pin-controller instance FSYS0 data */
.pin_banks = exynos7420_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos7420_pin_banks1),
}, {
/* pin-controller instance FSYS1 data */
.pin_banks = exynos7420_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos7420_pin_banks2),
},
};
static const struct udevice_id exynos7420_pinctrl_ids[] = {
{ .compatible = "samsung,exynos7420-pinctrl",
.data = (ulong)exynos7420_pin_ctrl },
{ }
};
U_BOOT_DRIVER(pinctrl_exynos7420) = {
.name = "pinctrl_exynos7420",
.id = UCLASS_PINCTRL,
.of_match = exynos7420_pinctrl_ids,
.priv_auto_alloc_size = sizeof(struct exynos_pinctrl_priv),
.ops = &exynos7420_pinctrl_ops,
.probe = exynos_pinctrl_probe,
.flags = DM_FLAG_PRE_RELOC
};