u-boot/board/prodrive/common/fpga.c
Jean-Christophe PLAGNIOL-VILLARD 6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00

183 lines
5.5 KiB
C

/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2001-2004
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <command.h>
/* ------------------------------------------------------------------------- */
#ifdef FPGA_DEBUG
#define DBG(x...) printf(x)
#else
#define DBG(x...)
#endif /* DEBUG */
#define FPGA_PRG CONFIG_SYS_FPGA_PRG /* FPGA program pin (cpu output)*/
#define FPGA_CLK CONFIG_SYS_FPGA_CLK /* FPGA clk pin (cpu output) */
#define FPGA_DATA CONFIG_SYS_FPGA_DATA /* FPGA data pin (cpu output) */
#define FPGA_DONE CONFIG_SYS_FPGA_DONE /* FPGA done pin (cpu input) */
#define FPGA_INIT CONFIG_SYS_FPGA_INIT /* FPGA init pin (cpu input) */
#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */
#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */
#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
#ifndef OLD_VAL
# define OLD_VAL 0
#endif
#if 0 /* test-only */
#define FPGA_WRITE_1 { \
SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set clock to 0 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set data to 1 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
#define FPGA_WRITE_0 { \
SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set clock to 0 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | 0 | 0 ); /* set data to 0 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | 0 ); /* set clock to 1 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
#else
#define FPGA_WRITE_1 { \
SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set data to 1 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
#define FPGA_WRITE_0 { \
SET_FPGA(OLD_VAL | FPGA_PRG | 0 | 0 ); /* set data to 0 */ \
SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | 0 );} /* set data to 1 */
#endif
static int fpga_boot(unsigned char *fpgadata, int size)
{
int i,index,len;
int count;
int j;
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = fpgadata[index];
DBG("FPGA: %s\n", &(fpgadata[index+1]));
index += len+3;
}
/* search for preamble 0xFFFFFFFF */
while (1) {
if ((fpgadata[index] == 0xff) && (fpgadata[index+1] == 0xff) &&
(fpgadata[index+2] == 0xff) && (fpgadata[index+3] == 0xff))
break; /* preamble found */
else
index++;
}
DBG("FPGA: configdata starts at position 0x%x\n",index);
DBG("FPGA: length of fpga-data %d\n", size-index);
/*
* Setup port pins for fpga programming
*/
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */
DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
/*
* Init fpga by asserting and deasserting PROGRAM*
*/
SET_FPGA(0 | FPGA_CLK | FPGA_DATA); /* set prog active */
/* Wait for FPGA init line low */
count = 0;
while (FPGA_INIT_STATE) {
udelay(1000); /* wait 1ms */
/* Check for timeout - 100us max, so use 3ms */
if (count++ > 3) {
DBG("FPGA: Booting failed!\n");
return ERROR_FPGA_PRG_INIT_LOW;
}
}
DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
/* deassert PROGRAM* */
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set prog inactive */
/* Wait for FPGA end of init period . */
count = 0;
while (!(FPGA_INIT_STATE)) {
udelay(1000); /* wait 1ms */
/* Check for timeout */
if (count++ > 3) {
DBG("FPGA: Booting failed!\n");
return ERROR_FPGA_PRG_INIT_HIGH;
}
}
DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
DBG("write configuration data into fpga\n");
/* write configuration-data into fpga... */
/*
* Load uncompressed image into fpga
*/
for (i=index; i<size; i++) {
for (j=0; j<8; j++) {
if ((fpgadata[i] & 0x80) == 0x80) {
FPGA_WRITE_1;
} else {
FPGA_WRITE_0;
}
fpgadata[i] <<= 1;
}
}
DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" );
DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" );
/*
* Check if fpga's DONE signal - correctly booted ?
*/
/* Wait for FPGA end of programming period . */
count = 0;
while (!(FPGA_DONE_STATE)) {
udelay(1000); /* wait 1ms */
/* Check for timeout */
if (count++ > 3) {
DBG("FPGA: Booting failed!\n");
return ERROR_FPGA_PRG_DONE;
}
}
DBG("FPGA: Booting successful!\n");
return 0;
}