mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
191 lines
3.8 KiB
Text
191 lines
3.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/bcm6328-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/power-domain/bcm6328-power-domain.h>
|
|
#include <dt-bindings/reset/bcm6328-reset.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "brcm,bcm6328";
|
|
|
|
aliases {
|
|
spi0 = &spi;
|
|
};
|
|
|
|
cpus {
|
|
reg = <0x10000000 0x4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bcm6328-cpu", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bcm6328-cpu", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
hsspi_pll: hsspi-pll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133333333>;
|
|
};
|
|
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
periph_clk: periph-clk {
|
|
compatible = "brcm,bcm6345-clk";
|
|
reg = <0x10000004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
ubus {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
periph_rst: reset-controller@10000010 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0x10000010 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pll_cntl: syscon@10000068 {
|
|
compatible = "syscon";
|
|
reg = <0x10000068 0x4>;
|
|
};
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pll_cntl>;
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
|
|
wdt: watchdog@1000005c {
|
|
compatible = "brcm,bcm6345-wdt";
|
|
reg = <0x1000005c 0xc>;
|
|
clocks = <&periph_osc>;
|
|
};
|
|
|
|
wdt-reboot {
|
|
compatible = "wdt-reboot";
|
|
wdt = <&wdt>;
|
|
};
|
|
|
|
gpio: gpio-controller@10000084 {
|
|
compatible = "brcm,bcm6345-gpio";
|
|
reg = <0x10000084 0x4>, <0x1000008c 0x4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@10000100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000100 0x18>;
|
|
clocks = <&periph_osc>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10000120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000120 0x18>;
|
|
clocks = <&periph_osc>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
leds: led-controller@10000800 {
|
|
compatible = "brcm,bcm6328-leds";
|
|
reg = <0x10000800 0x24>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi: spi@10001000 {
|
|
compatible = "brcm,bcm6328-hsspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x10001000 0x600>;
|
|
clocks = <&periph_clk BCM6328_CLK_HSSPI>, <&hsspi_pll>;
|
|
clock-names = "hsspi", "pll";
|
|
resets = <&periph_rst BCM6328_RST_SPI>;
|
|
spi-max-frequency = <33333334>;
|
|
num-cs = <3>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
periph_pwr: power-controller@10001848 {
|
|
compatible = "brcm,bcm6328-power-domain";
|
|
reg = <0x10001848 0x4>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
ehci: usb-controller@10002500 {
|
|
compatible = "brcm,bcm6328-ehci", "generic-ehci";
|
|
reg = <0x10002500 0x100>;
|
|
phys = <&usbh>;
|
|
big-endian;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb-controller@10002600 {
|
|
compatible = "brcm,bcm6328-ohci", "generic-ohci";
|
|
reg = <0x10002600 0x100>;
|
|
phys = <&usbh>;
|
|
big-endian;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@10002700 {
|
|
compatible = "brcm,bcm6328-usbh";
|
|
reg = <0x10002700 0x38>;
|
|
#phy-cells = <0>;
|
|
clocks = <&periph_clk BCM6328_CLK_USBH>;
|
|
clock-names = "usbh";
|
|
power-domains = <&periph_pwr BCM6328_PWR_USBH>;
|
|
resets = <&periph_rst BCM6328_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
memory-controller@10003000 {
|
|
compatible = "brcm,bcm6328-mc";
|
|
reg = <0x10003000 0x864>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
};
|