mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
21b29fc64e
Compared to the Armada 3700, the Armada 7K and 8K are much more on the high-end side: they use a dual Cortex-A72 or a quad Cortex-A72, as opposed to the Cortex-A53 for the Armada 3700. The Armada 7K and 8K also use a fairly unique architecture, internally they are composed of several components: - One AP (Application Processor), which contains the processor itself and a few core hardware blocks. The AP used in the Armada 7K and 8K is called AP806, and is available in two configurations: dual Cortex-A72 and quad Cortex-A72. - One or two CP (Communication Processor), which contain most of the I/O interfaces (SATA, PCIe, Ethernet, etc.). The 7K family chips have one CP, while the 8K family chips integrate two CPs, providing two times the number of I/O interfaces available in the CP. The CP used in the 7K and 8K is called CP110. All in all, this gives the following combinations: - Armada 7020, which is a dual Cortex-A72 with one CP - Armada 7040, which is a quad Cortex-A72 with one CP - Armada 8020, which is a dual Cortex-A72 with two CPs - Armada 8040, which is a quad Cortex-A72 with two CPs This patch adds basic support for this ARMv8 based SoC into U-Boot. Future patches will integrate other device drivers and board support, starting with the Marvell DB-88F7040 development board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
41 lines
882 B
Makefile
41 lines
882 B
Makefile
#
|
|
# Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
ifdef CONFIG_ARM64
|
|
|
|
obj-$(CONFIG_ARMADA_3700) += armada3700/
|
|
obj-$(CONFIG_ARMADA_8K) += armada8k/
|
|
obj-y += arm64-common.o
|
|
obj-y += sata.o
|
|
|
|
else # CONFIG_ARM64
|
|
|
|
ifdef CONFIG_KIRKWOOD
|
|
|
|
obj-y = dram.o
|
|
obj-y += gpio.o
|
|
obj-y += timer.o
|
|
|
|
else # CONFIG_KIRKWOOD
|
|
|
|
obj-y = cpu.o
|
|
obj-y += dram.o
|
|
ifndef CONFIG_SPL_BUILD
|
|
obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
|
|
obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
|
|
obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
|
|
endif # CONFIG_SPL_BUILD
|
|
obj-y += gpio.o
|
|
obj-y += mbus.o
|
|
obj-y += timer.o
|
|
obj-$(CONFIG_SPL_BUILD) += spl.o
|
|
obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o
|
|
|
|
obj-$(CONFIG_ARMADA_38X) += serdes/a38x/
|
|
obj-$(CONFIG_ARMADA_XP) += serdes/axp/
|
|
|
|
endif # CONFIG_KIRKWOOD
|
|
endif # CONFIG_ARM64
|