u-boot/drivers/serial/atmel_usart.c
Marek Vasut ec3fd68952 serial: Use default_serial_puts() in drivers
Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:50 -07:00

123 lines
3.2 KiB
C

/*
* Copyright (C) 2004-2006 Atmel Corporation
*
* Modified to support C structur SoC access by
* Andreas Bießmann <biessmann@corscience.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <serial.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include "atmel_usart.h"
DECLARE_GLOBAL_DATA_PTR;
static void atmel_serial_setbrg(void)
{
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
unsigned long divisor;
unsigned long usart_hz;
/*
* Master Clock
* Baud Rate = --------------
* 16 * CD
*/
usart_hz = get_usart_clk_rate(CONFIG_USART_ID);
divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
writel(USART3_BF(CD, divisor), &usart->brgr);
}
static int atmel_serial_init(void)
{
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
/*
* Just in case: drain transmitter register
* 1000us is enough for baudrate >= 9600
*/
if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY)))
__udelay(1000);
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
serial_setbrg();
writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
| USART3_BF(USCLKS, USART3_USCLKS_MCK)
| USART3_BF(CHRL, USART3_CHRL_8)
| USART3_BF(PAR, USART3_PAR_NONE)
| USART3_BF(NBSTOP, USART3_NBSTOP_1)),
&usart->mr);
writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
/* 100us is enough for the new settings to be settled */
__udelay(100);
return 0;
}
static void atmel_serial_putc(char c)
{
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
if (c == '\n')
serial_putc('\r');
while (!(readl(&usart->csr) & USART3_BIT(TXRDY)));
writel(c, &usart->thr);
}
static int atmel_serial_getc(void)
{
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
WATCHDOG_RESET();
return readl(&usart->rhr);
}
static int atmel_serial_tstc(void)
{
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
}
static struct serial_device atmel_serial_drv = {
.name = "atmel_serial",
.start = atmel_serial_init,
.stop = NULL,
.setbrg = atmel_serial_setbrg,
.putc = atmel_serial_putc,
.puts = default_serial_puts,
.getc = atmel_serial_getc,
.tstc = atmel_serial_tstc,
};
void atmel_serial_initialize(void)
{
serial_register(&atmel_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &atmel_serial_drv;
}