u-boot/include/configs/mx7_common.h
Fabio Estevam 6baa261615 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file
Having CONFIG_SYS_MALLOC_LEN in mx7_common.h is not a good idea,
because the malloc() pool size is board dependent.

For example: if a certain board has support for splashscreen or DFU,
it may be necessary to adjust CONFIG_SYS_MALLOC_LEN to a larger value.

So define CONFIG_SYS_MALLOC_LEN in each board config file.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-03 19:16:39 +02:00

97 lines
2.1 KiB
C

/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* Configuration settings for the Freescale i.MX7.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MX7_COMMON_H
#define __MX7_COMMON_H
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#ifndef CONFIG_MX7
#define CONFIG_MX7
#endif
/* Timer settings */
#define CONFIG_MXC_GPT_HCLK
#define CONFIG_SYSCOUNTER_TIMER
#define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */
#define CONFIG_SYS_FSL_CLK
#define CONFIG_SYS_BOOTM_LEN 0x1000000
/* Enable iomux-lpsr support */
#define CONFIG_IOMUX_LPSR
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_LOADADDR 0x80800000
#define CONFIG_SYS_TEXT_BASE 0x87800000
#ifndef CONFIG_BOOTDELAY
#define CONFIG_BOOTDELAY 3
#endif
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/* Filesystems and image support */
#define CONFIG_CMD_BOOTZ
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
/* Miscellaneous configurable options */
#undef CONFIG_CMD_IMLS
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MAXARGS 32
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif
/* GPIO */
#define CONFIG_MXC_GPIO
/* UART */
#define CONFIG_MXC_UART
/* MMC */
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
/* Fuses */
#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
/*
* Default boot linux kernel in no secure mode.
* If want to boot kernel in secure mode, please define CONFIG_MX7_SEC
*/
#ifndef CONFIG_MX7_SEC
#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_PSCI
#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#define CONFIG_ARMV7_SECURE_BASE 0x00900000
#endif
#endif