mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
3d2c8e6c7f
Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <trini@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
159 lines
4.2 KiB
Text
159 lines
4.2 KiB
Text
Summary
|
|
=======
|
|
|
|
This README is about U-Boot support for TI's ARM 926EJS based family of SoCs.
|
|
These SOCs are used for cameras, video security and surveillance, DVR's, etc.
|
|
DaVinci SOC's comprise of DM644x, DM646x, DM35x and DM36x series of SOC's
|
|
Additionally there are some SOCs meant for the audio market which though have
|
|
an OMAP part number are very similar to the DaVinci series of SOC's
|
|
Additionally, some family members contain a TI DSP and/or graphics
|
|
co processors along with a host of other peripherals.
|
|
|
|
Currently the following boards are supported:
|
|
|
|
* TI DaVinci DM644x EVM
|
|
|
|
* TI DaVinci DM646x EVM
|
|
|
|
* TI DaVinci DM355 EVM
|
|
|
|
* TI DaVinci DM365 EVM
|
|
|
|
* TI DA830 EVM
|
|
|
|
* TI DA850 EVM
|
|
|
|
* DM355 based Leopard board
|
|
|
|
* DM644x based schmoogie board
|
|
|
|
* DM644x based sffsdr board
|
|
|
|
* DM644x based sonata board
|
|
|
|
Build
|
|
=====
|
|
|
|
* TI DaVinci DM644x EVM:
|
|
|
|
make davinci_dvevm_config
|
|
make
|
|
|
|
* TI DaVinci DM646x EVM:
|
|
|
|
make davinci_dm6467evm_config
|
|
make
|
|
|
|
* TI DaVinci DM355 EVM:
|
|
|
|
make davinci_dm355evm_config
|
|
make
|
|
|
|
* TI DaVinci DM365 EVM:
|
|
|
|
make davinci_dm365evm_config
|
|
make
|
|
|
|
* TI DA830 EVM:
|
|
|
|
make da830evm_config
|
|
make
|
|
|
|
* TI DA850 EVM:
|
|
|
|
make da850evm_config
|
|
make
|
|
|
|
* DM355 based Leopard board:
|
|
|
|
make davinci_dm355leopard_config
|
|
make
|
|
|
|
* DM644x based schmoogie board:
|
|
|
|
make davinci_schmoogie_config
|
|
make
|
|
|
|
* DM644x based sffsdr board:
|
|
|
|
make davinci_sffsdr_config
|
|
make
|
|
|
|
* DM644x based sonata board:
|
|
|
|
make davinci_sonata_config
|
|
make
|
|
|
|
Bootloaders
|
|
===============
|
|
|
|
The DaVinci SOC's use 2 bootloaders. The low level initialization
|
|
is done by a UBL(user boot loader). The UBL is written to a NAND/NOR/SPI flash
|
|
by a programmer. During initial bootup, the ROM Bootloader reads the UBL
|
|
from a storage device and loads it into the IRAM. The UBL then loads the U-Boot
|
|
into the RAM.
|
|
The programmers and UBL are always released as part of any standard TI
|
|
software release associated with an SOC.
|
|
|
|
Alternative boot method (DA850 EVM only):
|
|
For the DA850 EVM an SPL (secondary program loader, see doc/README.SPL)
|
|
is provided to load U-Boot directly from SPI flash. In this case, the
|
|
SPL does the low level initialization that is otherwise done by the SPL.
|
|
To build U-Boot with this SPL, do
|
|
make da850evm_config
|
|
make u-boot.ais
|
|
and program the resulting u-boot.ais file to the SPI flash of the DA850 EVM.
|
|
|
|
Environment Variables
|
|
=====================
|
|
|
|
The DA850 EVM allows the user to specify the maximum cpu clock allowed by the
|
|
silicon, in Hz, via an environment variable "maxcpuclk".
|
|
|
|
The maximum clock rate allowed depends on the silicon populated on the EVM.
|
|
Please make sure you understand the restrictions placed on this clock in the
|
|
device specific datasheet before setting up this variable. This information is
|
|
passed to the Linux kernel using the ATAG_REVISION atag.
|
|
|
|
If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK
|
|
is used to obtain this information.
|
|
|
|
Links
|
|
=====
|
|
|
|
1) TI DaVinci DM355 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
|
|
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=203&osCsid=c499af6087317f11b3da19b4e8f1af32
|
|
|
|
2) TI DaVinci DM365 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm365.html?247SEM=
|
|
http://support.spectrumdigital.com/boards/evmdm365/revc/
|
|
|
|
3) DaVinci DM355 based leopard board
|
|
http://designsomething.org/leopardboard/default.aspx
|
|
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=192&osCsid=67c20335668ffc57cb35727106eb24b1
|
|
|
|
4) TI DaVinci DM6467 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm6467.html
|
|
http://support.spectrumdigital.com/boards/evmdm6467/revf/
|
|
|
|
5) TI DaVinci DM6446 EVM:
|
|
http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html
|
|
http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=222
|
|
|
|
6) TI DA830 EVM
|
|
http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
|
|
http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
|
|
|
|
7) TI DA850 EVM
|
|
http://focus.ti.com/docs/prod/folders/print/omap-l138.html
|
|
http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
|
|
|
|
Davinci special defines
|
|
=======================
|
|
|
|
CONFIG_SYS_DV_NOR_BOOT_CFG: AM18xx based boards, booting in NOR Boot mode
|
|
need a "NOR Boot Configuration Word" stored
|
|
in the NOR Flash. This define adds this.
|
|
More Info about this, see:
|
|
spraba5a.pdf chapter 3.1
|