mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 16:53:06 +00:00
2d67a095dc
Driver for Cadence EDAC DDR controller, as found in the Renesas RZ/N1. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
175 lines
6.3 KiB
C
175 lines
6.3 KiB
C
/* SPDX-License-Identifier: BSD-2-Clause */
|
|
/*
|
|
* Cadence DDR Controller
|
|
*
|
|
* Copyright (C) 2015 Renesas Electronics Europe Ltd
|
|
*/
|
|
|
|
#ifndef CADENCE_DDR_CTRL_H
|
|
#define CADENCE_DDR_CTRL_H
|
|
|
|
enum cdns_ddr_range_prot {
|
|
CDNS_DDR_RANGE_PROT_BITS_PRIV_SECURE = 0,
|
|
CDNS_DDR_RANGE_PROT_BITS_SECURE = 1,
|
|
CDNS_DDR_RANGE_PROT_BITS_PRIV = 2,
|
|
CDNS_DDR_RANGE_PROT_BITS_FULL = 3,
|
|
};
|
|
|
|
/**
|
|
* Initialise the Cadence DDR Controller, but doesn't start it.
|
|
*
|
|
* It sets up the controller so that all 4 AXI slave ports allow access to all
|
|
* of the DDR with the same settings. This means that:
|
|
* - Full access permisions.
|
|
* - All read/write priorities are set to 2.
|
|
* - Bandwidth is set to 50%, overflow is allowed, i.e. it's a soft limit.
|
|
* If you want different properties for different ports and/or addr ranges, call
|
|
* the other functions before calling cdns_ddr_ctrl_start().
|
|
*
|
|
* @ddr_ctrl_base Physical address of the DDR Controller.
|
|
* @async 0 if DDR clock is synchronous with the controller clock
|
|
* otherwise 1.
|
|
* @reg0 Pointer to array of 32-bit values to be written to registers
|
|
* 0 to 87. The values are generated by Cadence TCL scripts.
|
|
* @reg350 Pointer to array of 32-bit values to be written to registers
|
|
* 350 to 374. The values are generated by Cadence TCL scripts.
|
|
* @ddr_start_addr Physical address of the start of DDR.
|
|
* @ddr_size Size of the DDR in bytes. The controller will set the port
|
|
* protection range to match this size.
|
|
* @enable_ecc 0 to disable ECC, 1 to enable it.
|
|
* @enable_8bit 0 to use 16-bit bus width, 1 to use 8-bit bus width.
|
|
*/
|
|
void cdns_ddr_ctrl_init(void *ddr_ctrl_base, int async,
|
|
const u32 *reg0, const u32 *reg350,
|
|
u32 ddr_start_addr, u32 ddr_size,
|
|
int enable_ecc, int enable_8bit);
|
|
|
|
/**
|
|
* Start the Cadence DDR Controller.
|
|
*
|
|
* @ddr_ctrl_base Physical address of the DDR Controller.
|
|
*/
|
|
void cdns_ddr_ctrl_start(void *ddr_ctrl_base);
|
|
|
|
/**
|
|
* Set the priority for read and write operations for a specific AXI slave port.
|
|
*
|
|
* @base Physical address of the DDR Controller.
|
|
* @port Port number. Range is 0 to 3.
|
|
* @read_pri Priority for reads. Range is 0 to 3, where 0 is highest priority.
|
|
* @write_pri Priority for writes. Range is 0 to 3, where 0 is highest priority.
|
|
*/
|
|
void cdns_ddr_set_port_rw_priority(void *base, int port,
|
|
u8 read_pri, u8 write_pri);
|
|
|
|
/**
|
|
* Specify address range for a protection entry, for a specific AXI slave port.
|
|
*
|
|
* @base Physical address of the DDR Controller.
|
|
* @port Port number. Range is 0 to 3.
|
|
* @entry The protection entry. Range is 0 to 15.
|
|
* @start_addr Physical of the address range, must be aligned to 16KB.
|
|
* @size Size of the address range, must be multiple of 16KB.
|
|
*/
|
|
void cdns_ddr_enable_port_addr_range(void *base, int port, int entry,
|
|
u32 addr_start, u32 size);
|
|
|
|
/**
|
|
* Specify address range for a protection entry, for all AXI slave ports.
|
|
*
|
|
* @base Physical address of the DDR Controller.
|
|
* @entry The protection entry. Range is 0 to 15.
|
|
* @start_addr Physical of the address range, must be aligned to 16KB.
|
|
* @size Size of the address range, must be multiple of 16KB.
|
|
*/
|
|
void cdns_ddr_enable_addr_range(void *base, int entry,
|
|
u32 addr_start, u32 size);
|
|
|
|
/**
|
|
* Specify protection entry details, for a specific AXI slave port.
|
|
*
|
|
* See the hardware manual for details of the range check bits.
|
|
*
|
|
* @base Physical address of the DDR Controller.
|
|
* @port Port number. Range is 0 to 3.
|
|
* @entry The protection entry. Range is 0 to 15.
|
|
*/
|
|
void cdns_ddr_enable_port_prot(void *base, int port, int entry,
|
|
enum cdns_ddr_range_prot range_protection_bits,
|
|
u16 range_RID_check_bits,
|
|
u16 range_WID_check_bits,
|
|
u8 range_RID_check_bits_ID_lookup,
|
|
u8 range_WID_check_bits_ID_lookup);
|
|
|
|
/**
|
|
* Specify protection entry details, for all AXI slave ports.
|
|
*
|
|
* See the hardware manual for details of the range check bits.
|
|
*
|
|
* @base Physical address of the DDR Controller.
|
|
* @entry The protection entry. Range is 0 to 15.
|
|
*/
|
|
void cdns_ddr_enable_prot(void *base, int entry,
|
|
enum cdns_ddr_range_prot range_protection_bits,
|
|
u16 range_RID_check_bits,
|
|
u16 range_WID_check_bits,
|
|
u8 range_RID_check_bits_ID_lookup,
|
|
u8 range_WID_check_bits_ID_lookup);
|
|
|
|
/**
|
|
* Specify bandwidth for each AXI port.
|
|
*
|
|
* See the hardware manual for details of the range check bits.
|
|
*
|
|
* @base Physical address of the DDR Controller.
|
|
* @port Port number. Range is 0 to 3.
|
|
* @max_percent 0 to 100.
|
|
*/
|
|
void cdns_ddr_set_port_bandwidth(void *base, int port,
|
|
u8 max_percent, u8 overflow_ok);
|
|
|
|
/* Standard JEDEC registers */
|
|
#define MODE_REGISTER_MASK (3 << 14)
|
|
#define MODE_REGISTER_MR0 (0 << 14)
|
|
#define MODE_REGISTER_MR1 (1 << 14)
|
|
#define MODE_REGISTER_MR2 (2 << 14)
|
|
#define MODE_REGISTER_MR3 (3 << 14)
|
|
#define MR1_DRIVE_STRENGTH_MASK ((1 << 5) | (1 << 1))
|
|
#define MR1_DRIVE_STRENGTH_34_OHMS ((0 << 5) | (1 << 1))
|
|
#define MR1_DRIVE_STRENGTH_40_OHMS ((0 << 5) | (0 << 1))
|
|
#define MR1_ODT_IMPEDANCE_MASK ((1 << 9) | (1 << 6) | (1 << 2))
|
|
#define MR1_ODT_IMPEDANCE_60_OHMS ((0 << 9) | (0 << 6) | (1 << 2))
|
|
#define MR1_ODT_IMPEDANCE_120_OHMS ((0 << 9) | (1 << 6) | (0 << 2))
|
|
#define MR1_ODT_IMPEDANCE_40_OHMS ((0 << 9) | (1 << 6) | (1 << 2))
|
|
#define MR1_ODT_IMPEDANCE_20_OHMS ((1 << 9) | (0 << 6) | (0 << 2))
|
|
#define MR1_ODT_IMPEDANCE_30_OHMS ((1 << 9) | (0 << 6) | (1 << 2))
|
|
#define MR2_DYNAMIC_ODT_MASK (3 << 9)
|
|
#define MR2_DYNAMIC_ODT_OFF (0 << 9)
|
|
#define MR2_SELF_REFRESH_TEMP_MASK (1 << 7)
|
|
#define MR2_SELF_REFRESH_TEMP_EXT (1 << 7)
|
|
|
|
/**
|
|
* Set certain fields of the JEDEC MR1 register.
|
|
*/
|
|
void cdns_ddr_set_mr1(void *base, int cs, u16 odt_impedance, u16 drive_strength);
|
|
|
|
/**
|
|
* Set certain fields of the JEDEC MR2 register.
|
|
*/
|
|
void cdns_ddr_set_mr2(void *base, int cs, u16 dynamic_odt, u16 self_refresh_temp);
|
|
|
|
/**
|
|
* Set ODT map of the DDR Controller.
|
|
*/
|
|
void cdns_ddr_set_odt_map(void *base, int cs, u16 odt_map);
|
|
|
|
/**
|
|
* Set ODT settings in the DDR Controller.
|
|
*/
|
|
void cdns_ddr_set_odt_times(void *base, u8 TODTL_2CMD, u8 TODTH_WR, u8 TODTH_RD,
|
|
u8 WR_TO_ODTH, u8 RD_TO_ODTH);
|
|
|
|
void cdns_ddr_set_same_cs_delays(void *base, u8 r2r, u8 r2w, u8 w2r, u8 w2w);
|
|
void cdns_ddr_set_diff_cs_delays(void *base, u8 r2r, u8 r2w, u8 w2r, u8 w2w);
|
|
|
|
#endif
|