u-boot/board/cssi/cmpc885
Christophe Leroy 0ec8ebef87 board: cssi: Activate SMC relocation on CMPC885 board for MIAE device
When CMPC885 board is used for MIAE device, SCC2 SCC3 and SMC2
are used for serial lines. Therefore only SCC4 is available for
handling the TDM line.

In order to use SCC4 in QMC mode without loosing SMC2, SMC2
must be relocated.

Activate SMC relocation and relocate SMC2 at offset 0x1fc0 which
is unused.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-05 07:26:53 +02:00
..
cmpc885.c board: cssi: Activate SMC relocation on CMPC885 board for MIAE device 2023-05-05 07:26:53 +02:00
cmpc885.env board: cssi: Add new board MCR3000_2G 2023-02-11 08:47:58 +01:00
Kconfig board: cssi: Add new board MCR3000_2G 2023-02-11 08:47:58 +01:00
Makefile board: cssi: Create dedicated file for common sources 2023-04-28 17:52:23 +02:00
nand.c board: cssi: Add new board MCR3000_2G 2023-02-11 08:47:58 +01:00
sdram.c board: cssi: Add new board MCR3000_2G 2023-02-11 08:47:58 +01:00
u-boot.lds board: cssi: Add new board MCR3000_2G 2023-02-11 08:47:58 +01:00