u-boot/board/gateworks/gw_ventana/gsc.c
Tim Harvey 2d833c8528 imx: ventana: move GSC boot watchdog disable function to gsc.c
Move the code that disables the GSC boot watchdog into gsc.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00

218 lines
5.5 KiB
C

/*
* Copyright (C) 2013 Gateworks Corporation
*
* Author: Tim Harvey <tharvey@gateworks.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/errno.h>
#include <common.h>
#include <i2c.h>
#include <linux/ctype.h>
#include "gsc.h"
/*
* The Gateworks System Controller will fail to ACK a master transaction if
* it is busy, which can occur during its 1HZ timer tick while reading ADC's.
* When this does occur, it will never be busy long enough to fail more than
* 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with
* 3 retries.
*/
int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int retry = 3;
int n = 0;
int ret;
while (n++ < retry) {
ret = i2c_read(chip, addr, alen, buf, len);
if (!ret)
break;
debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr,
n, ret);
if (ret != -ENODEV)
break;
mdelay(10);
}
return ret;
}
int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int retry = 3;
int n = 0;
int ret;
while (n++ < retry) {
ret = i2c_write(chip, addr, alen, buf, len);
if (!ret)
break;
debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr,
n, ret);
if (ret != -ENODEV)
break;
mdelay(10);
}
mdelay(100);
return ret;
}
static void read_hwmon(const char *name, uint reg, uint size)
{
unsigned char buf[3];
uint ui;
printf("%-8s:", name);
memset(buf, 0, sizeof(buf));
if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) {
puts("fRD\n");
} else {
ui = buf[0] | (buf[1]<<8) | (buf[2]<<16);
if (ui == 0xffffff)
puts("invalid\n");
else
printf("%d\n", ui);
}
}
int gsc_info(int verbose)
{
const char *model = getenv("model");
unsigned char buf[16];
i2c_set_bus_num(0);
if (gsc_i2c_read(GSC_SC_ADDR, 0, 1, buf, 16))
return CMD_RET_FAILURE;
printf("GSC: v%d", buf[GSC_SC_FWVER]);
printf(" 0x%04x", buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC+1]<<8);
printf(" WDT:%sabled", (buf[GSC_SC_CTRL1] & (1<<GSC_SC_CTRL1_WDEN))
? "en" : "dis");
if (buf[GSC_SC_STATUS] & (1 << GSC_SC_IRQ_WATCHDOG)) {
buf[GSC_SC_STATUS] &= ~(1 << GSC_SC_IRQ_WATCHDOG);
puts(" WDT_RESET");
gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1,
&buf[GSC_SC_STATUS], 1);
}
puts("\n");
if (!verbose)
return CMD_RET_SUCCESS;
read_hwmon("Temp", GSC_HWMON_TEMP, 2);
read_hwmon("VIN", GSC_HWMON_VIN, 3);
read_hwmon("VBATT", GSC_HWMON_VBATT, 3);
read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3);
read_hwmon("VDD_ARM", GSC_HWMON_VDD_CORE, 3);
read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3);
read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3);
read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3);
read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3);
read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3);
read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3);
read_hwmon("VDD_IO2", GSC_HWMON_VDD_IO2, 3);
switch (model[3]) {
case '1': /* GW51xx */
read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */
break;
case '2': /* GW52xx */
break;
case '3': /* GW53xx */
read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); /* -C rev */
read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3);
break;
case '4': /* GW54xx */
read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */
read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3);
break;
case '5': /* GW55xx */
break;
}
return 0;
}
/*
* The Gateworks System Controller implements a boot
* watchdog (always enabled) as a workaround for IMX6 boot related
* errata such as:
* ERR005768 - no fix scheduled
* ERR006282 - fixed in silicon r1.2
* ERR007117 - fixed in silicon r1.3
* ERR007220 - fixed in silicon r1.3
* ERR007926 - no fix scheduled
* see http://cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf
*
* Disable the boot watchdog
*/
int gsc_boot_wd_disable(void)
{
u8 reg;
i2c_set_bus_num(CONFIG_I2C_GSC);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1)) {
reg |= (1 << GSC_SC_CTRL1_WDDIS);
if (!gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
return 0;
}
puts("Error: could not disable GSC Watchdog\n");
return 1;
}
#ifdef CONFIG_CMD_GSC
static int do_gsc_wd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned char reg;
if (argc < 2)
return CMD_RET_USAGE;
if (strcasecmp(argv[1], "enable") == 0) {
int timeout = 0;
if (argc > 2)
timeout = simple_strtoul(argv[2], NULL, 10);
i2c_set_bus_num(0);
if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
return CMD_RET_FAILURE;
reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME));
if (timeout == 60)
reg |= (1 << GSC_SC_CTRL1_WDTIME);
else
timeout = 30;
reg |= (1 << GSC_SC_CTRL1_WDEN);
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
return CMD_RET_FAILURE;
printf("GSC Watchdog enabled with timeout=%d seconds\n",
timeout);
} else if (strcasecmp(argv[1], "disable") == 0) {
i2c_set_bus_num(0);
if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
return CMD_RET_FAILURE;
reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME));
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
return CMD_RET_FAILURE;
printf("GSC Watchdog disabled\n");
} else {
return CMD_RET_USAGE;
}
return CMD_RET_SUCCESS;
}
static int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return gsc_info(1);
if (strcasecmp(argv[1], "wd") == 0)
return do_gsc_wd(cmdtp, flag, --argc, ++argv);
return CMD_RET_USAGE;
}
U_BOOT_CMD(
gsc, 4, 1, do_gsc, "GSC configuration",
"[wd enable [30|60]]|[wd disable]\n"
);
#endif /* CONFIG_CMD_GSC */