u-boot/include/configs/k2g_evm.h
Andrew F. Davis 82f1205601 configs: k2g_evm: Remove PMMC loading environment commands
The PMMC firmware should be bundled with the FIT image for HS devices,
remove the steps that load and install this firmware outside of FIT.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-12 17:58:03 -04:00

104 lines
3 KiB
C

/*
* Configuration header file for TI's k2g-evm
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_K2G_EVM_H
#define __CONFIG_K2G_EVM_H
#include <environment/ti/mmc.h>
#include <environment/ti/spi.h>
/* Platform type */
#define CONFIG_SOC_K2G
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_PMMC_BOOT_ENV \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
DEFAULT_FIT_TI_ARGS \
"boot=mmc\0" \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"rd_spec=-\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"findfdt="\
"if test $board_name = 66AK2GGP; then " \
"setenv name_fdt keystone-k2g-evm.dtb; " \
"else if test $board_name = 66AK2GIC; then " \
"setenv name_fdt keystone-k2g-ice.dtb; " \
"else if test $name_fdt = undefined; then " \
"echo WARNING: Could not determine device tree to use;"\
"fi;fi;fi;\0" \
"name_mon=skern-k2g.bin\0" \
"name_ubi=k2g-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2g-evm.gph\0" \
"init_mmc=run args_all args_mmc\0" \
"init_fw_rd_mmc=load mmc ${bootpart} ${rdaddr} " \
"${bootdir}/${name_fw_rd}; run set_rd_spec\0" \
"soc_variant=k2g\0" \
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
"${bootdir}/${name_kern}\0" \
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
#ifndef CONFIG_TI_SECURE_DEVICE
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run envboot; " \
"run init_${boot}; " \
"run get_mon_${boot} run_mon; " \
"run set_name_pmmc get_pmmc_${boot} run_pmmc; " \
"run get_kern_${boot}; " \
"run init_fw_rd_${boot}; " \
"run get_fdt_${boot}; " \
"run run_kern"
#else
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run envboot; " \
"run run_mon_hs; " \
"run init_${boot}; " \
"run get_fit_${boot}; " \
"bootm ${fit_loadaddr}#${name_fdt}"
#endif
/* SPL SPI Loader Configuration */
#define CONFIG_SPL_TEXT_BASE 0x0c080000
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 2
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
#define CONFIG_SF_DEFAULT_BUS 1
#define CONFIG_SF_DEFAULT_CS 0
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CADENCE_QSPI
#define CONFIG_CQSPI_REF_CLK 384000000
#define CONFIG_CQSPI_DECODER 0x0
#define CONFIG_BOUNCE_BUFFER
#endif
#define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS
#include <configs/ti_armv7_keystone2.h>
#endif /* __CONFIG_K2G_EVM_H */