u-boot/include/dt-bindings/pinctrl/dra.h
Lokesh Vutla 7aa1a40876 ARM: dts: dra7xx: sync DT with latest Linux
Sync all dra7xx based dts files with latest Linux

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-04 13:54:51 -05:00

77 lines
2.5 KiB
C

/*
* This header provides constants for DRA pinctrl bindings.
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* Author: Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _DT_BINDINGS_PINCTRL_DRA_H
#define _DT_BINDINGS_PINCTRL_DRA_H
/* DRA7 mux mode options for each pin. See TRM for options */
#define MUX_MODE0 0x0
#define MUX_MODE1 0x1
#define MUX_MODE2 0x2
#define MUX_MODE3 0x3
#define MUX_MODE4 0x4
#define MUX_MODE5 0x5
#define MUX_MODE6 0x6
#define MUX_MODE7 0x7
#define MUX_MODE8 0x8
#define MUX_MODE9 0x9
#define MUX_MODE10 0xa
#define MUX_MODE11 0xb
#define MUX_MODE12 0xc
#define MUX_MODE13 0xd
#define MUX_MODE14 0xe
#define MUX_MODE15 0xf
/* Certain pins need virtual mode, but note: they may glitch */
#define MUX_VIRTUAL_MODE0 (MODE_SELECT | (0x0 << 4))
#define MUX_VIRTUAL_MODE1 (MODE_SELECT | (0x1 << 4))
#define MUX_VIRTUAL_MODE2 (MODE_SELECT | (0x2 << 4))
#define MUX_VIRTUAL_MODE3 (MODE_SELECT | (0x3 << 4))
#define MUX_VIRTUAL_MODE4 (MODE_SELECT | (0x4 << 4))
#define MUX_VIRTUAL_MODE5 (MODE_SELECT | (0x5 << 4))
#define MUX_VIRTUAL_MODE6 (MODE_SELECT | (0x6 << 4))
#define MUX_VIRTUAL_MODE7 (MODE_SELECT | (0x7 << 4))
#define MUX_VIRTUAL_MODE8 (MODE_SELECT | (0x8 << 4))
#define MUX_VIRTUAL_MODE9 (MODE_SELECT | (0x9 << 4))
#define MUX_VIRTUAL_MODE10 (MODE_SELECT | (0xa << 4))
#define MUX_VIRTUAL_MODE11 (MODE_SELECT | (0xb << 4))
#define MUX_VIRTUAL_MODE12 (MODE_SELECT | (0xc << 4))
#define MUX_VIRTUAL_MODE13 (MODE_SELECT | (0xd << 4))
#define MUX_VIRTUAL_MODE14 (MODE_SELECT | (0xe << 4))
#define MUX_VIRTUAL_MODE15 (MODE_SELECT | (0xf << 4))
#define MODE_SELECT (1 << 8)
#define PULL_ENA (0 << 16)
#define PULL_DIS (1 << 16)
#define PULL_UP (1 << 17)
#define INPUT_EN (1 << 18)
#define SLEWCONTROL (1 << 19)
#define WAKEUP_EN (1 << 24)
#define WAKEUP_EVENT (1 << 25)
/* Active pin states */
#define PIN_OUTPUT (0 | PULL_DIS)
#define PIN_OUTPUT_PULLUP (PULL_UP)
#define PIN_OUTPUT_PULLDOWN (0)
#define PIN_INPUT (INPUT_EN | PULL_DIS)
#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
/*
* Macro to allow using the absolute physical address instead of the
* padconf registers instead of the offset from padconf base.
*/
#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)
#endif