u-boot/board/freescale/common/Makefile
Xiubo Li 660673af4f ARM: ls102xa: Setting device's stream id for SMMUs.
LS1 has 4 SMMUs for address translation of the masters. All the
SMMUs' stream IDs are 8-bit. The address translation depends on the
stream ID of the incoming transaction.
Each master has unique stream ID assigned to it and is configurable
through SCFG registers. The stream ID for the masters is identical
and share the same register field of STREAM ID registers.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-11 09:42:22 -08:00

75 lines
1.9 KiB
Makefile

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
MINIMAL=
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_INIT_MINIMAL
MINIMAL=y
endif
endif
ifdef MINIMAL
# necessary to create built-in.o
obj- := __dummy__.o
else
obj-$(CONFIG_FSL_CADMUS) += cadmus.o
obj-$(CONFIG_FSL_VIA) += cds_via.o
obj-$(CONFIG_FMAN_ENET) += fman.o
obj-$(CONFIG_FSL_PIXIS) += pixis.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
obj-$(CONFIG_VID) += vid.o
endif
obj-$(CONFIG_FSL_QIXIS) += qixis.o
obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
endif
obj-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o
ifndef CONFIG_RAMBOOT_PBL
obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o
endif
obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o
ifdef CONFIG_ARM
obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o
else
obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
endif
obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o
obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o
obj-$(CONFIG_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_MPC8555CDS) += cds_pci_ft.o
obj-$(CONFIG_MPC8536DS) += ics307_clk.o
obj-$(CONFIG_MPC8572DS) += ics307_clk.o
obj-$(CONFIG_P1022DS) += ics307_clk.o
obj-$(CONFIG_P2020DS) += ics307_clk.o
obj-$(CONFIG_P3041DS) += ics307_clk.o
obj-$(CONFIG_P4080DS) += ics307_clk.o
obj-$(CONFIG_P5020DS) += ics307_clk.o
obj-$(CONFIG_P5040DS) += ics307_clk.o
obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o
obj-$(CONFIG_ZM7300) += zm7300.o
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
# deal with common files for P-series corenet based devices
obj-$(CONFIG_P2041RDB) += p_corenet/
obj-$(CONFIG_P3041DS) += p_corenet/
obj-$(CONFIG_P4080DS) += p_corenet/
obj-$(CONFIG_P5020DS) += p_corenet/
obj-$(CONFIG_P5040DS) += p_corenet/
obj-$(CONFIG_LS102XA_NS_ACCESS) += ns_access.o
endif