mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
e8459dcc33
- add davinci driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
384 lines
8.4 KiB
C
384 lines
8.4 KiB
C
/*
|
|
* TI DaVinci (TMS320DM644x) I2C driver.
|
|
*
|
|
* (C) Copyright 2012-2014
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
* (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
* --------------------------------------------------------
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/i2c_defs.h>
|
|
#include <asm/io.h>
|
|
#include "davinci_i2c.h"
|
|
|
|
#define CHECK_NACK() \
|
|
do {\
|
|
if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
|
|
REG(&(i2c_base->i2c_con)) = 0;\
|
|
return 1;\
|
|
} \
|
|
} while (0)
|
|
|
|
static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap);
|
|
|
|
static int wait_for_bus(struct i2c_adapter *adap)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
int stat, timeout;
|
|
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
|
|
for (timeout = 0; timeout < 10; timeout++) {
|
|
stat = REG(&(i2c_base->i2c_stat));
|
|
if (!((stat) & I2C_STAT_BB)) {
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
return 0;
|
|
}
|
|
|
|
REG(&(i2c_base->i2c_stat)) = stat;
|
|
udelay(50000);
|
|
}
|
|
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int poll_i2c_irq(struct i2c_adapter *adap, int mask)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
int stat, timeout;
|
|
|
|
for (timeout = 0; timeout < 10; timeout++) {
|
|
udelay(1000);
|
|
stat = REG(&(i2c_base->i2c_stat));
|
|
if (stat & mask)
|
|
return stat;
|
|
}
|
|
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
return stat | I2C_TIMEOUT;
|
|
}
|
|
|
|
static void flush_rx(struct i2c_adapter *adap)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
|
|
while (1) {
|
|
if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_RRDY))
|
|
break;
|
|
|
|
REG(&(i2c_base->i2c_drr));
|
|
REG(&(i2c_base->i2c_stat)) = I2C_STAT_RRDY;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
static uint davinci_i2c_setspeed(struct i2c_adapter *adap, uint speed)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
uint32_t div, psc;
|
|
|
|
psc = 2;
|
|
/* SCLL + SCLH */
|
|
div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;
|
|
REG(&(i2c_base->i2c_psc)) = psc; /* 27MHz / (2 + 1) = 9MHz */
|
|
REG(&(i2c_base->i2c_scll)) = (div * 50) / 100; /* 50% Duty */
|
|
REG(&(i2c_base->i2c_sclh)) = div - REG(&(i2c_base->i2c_scll));
|
|
|
|
adap->speed = speed;
|
|
return 0;
|
|
}
|
|
|
|
static void davinci_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
|
|
if (REG(&(i2c_base->i2c_con)) & I2C_CON_EN) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
udelay(50000);
|
|
}
|
|
|
|
davinci_i2c_setspeed(adap, speed);
|
|
|
|
REG(&(i2c_base->i2c_oa)) = slaveadd;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
|
|
/* Interrupts must be enabled or I2C module won't work */
|
|
REG(&(i2c_base->i2c_ie)) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
|
|
I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
|
|
|
|
/* Now enable I2C controller (get it out of reset) */
|
|
REG(&(i2c_base->i2c_con)) = I2C_CON_EN;
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
static int davinci_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
int rc = 1;
|
|
|
|
if (chip == REG(&(i2c_base->i2c_oa)))
|
|
return rc;
|
|
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
if (wait_for_bus(adap))
|
|
return 1;
|
|
|
|
/* try to read one byte from current (or only) address */
|
|
REG(&(i2c_base->i2c_cnt)) = 1;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
|
|
I2C_CON_STP);
|
|
udelay(50000);
|
|
|
|
if (!(REG(&(i2c_base->i2c_stat)) & I2C_STAT_NACK)) {
|
|
rc = 0;
|
|
flush_rx(adap);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_con)) |= I2C_CON_STP;
|
|
udelay(20000);
|
|
if (wait_for_bus(adap))
|
|
return 1;
|
|
}
|
|
|
|
flush_rx(adap);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
return rc;
|
|
}
|
|
|
|
static int davinci_i2c_read(struct i2c_adapter *adap, uint8_t chip,
|
|
uint32_t addr, int alen, uint8_t *buf, int len)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
uint32_t tmp;
|
|
int i;
|
|
|
|
if ((alen < 0) || (alen > 2)) {
|
|
printf("%s(): bogus address length %x\n", __func__, alen);
|
|
return 1;
|
|
}
|
|
|
|
if (wait_for_bus(adap))
|
|
return 1;
|
|
|
|
if (alen != 0) {
|
|
/* Start address phase */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
|
|
REG(&(i2c_base->i2c_cnt)) = alen;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = tmp;
|
|
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
switch (alen) {
|
|
case 2:
|
|
/* Send address MSByte */
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
/* No break, fall through */
|
|
case 1:
|
|
/* Send address LSByte */
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = addr & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_XRDY |
|
|
I2C_STAT_NACK | I2C_STAT_ARDY);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_ARDY)) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Address phase is over, now read 'len' bytes and stop */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
|
|
REG(&(i2c_base->i2c_cnt)) = len & 0xffff;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = tmp;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_RRDY | I2C_STAT_NACK |
|
|
I2C_STAT_ROVR);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_RRDY) {
|
|
buf[i] = REG(&(i2c_base->i2c_drr));
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_SCD | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_SCD)) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
flush_rx(adap);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_i2c_write(struct i2c_adapter *adap, uint8_t chip,
|
|
uint32_t addr, int alen, uint8_t *buf, int len)
|
|
{
|
|
struct i2c_regs *i2c_base = davinci_get_base(adap);
|
|
uint32_t tmp;
|
|
int i;
|
|
|
|
if ((alen < 0) || (alen > 2)) {
|
|
printf("%s(): bogus address length %x\n", __func__, alen);
|
|
return 1;
|
|
}
|
|
if (len < 0) {
|
|
printf("%s(): bogus length %x\n", __func__, len);
|
|
return 1;
|
|
}
|
|
|
|
if (wait_for_bus(adap))
|
|
return 1;
|
|
|
|
/* Start address phase */
|
|
tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
|
|
I2C_CON_TRX | I2C_CON_STP;
|
|
REG(&(i2c_base->i2c_cnt)) = (alen == 0) ?
|
|
len & 0xffff : (len & 0xffff) + alen;
|
|
REG(&(i2c_base->i2c_sa)) = chip;
|
|
REG(&(i2c_base->i2c_con)) = tmp;
|
|
|
|
switch (alen) {
|
|
case 2:
|
|
/* Send address MSByte */
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = (addr >> 8) & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
/* No break, fall through */
|
|
case 1:
|
|
/* Send address LSByte */
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY) {
|
|
REG(&(i2c_base->i2c_dxr)) = addr & 0xff;
|
|
} else {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_XRDY | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (tmp & I2C_STAT_XRDY)
|
|
REG(&(i2c_base->i2c_dxr)) = buf[i];
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
tmp = poll_i2c_irq(adap, I2C_STAT_SCD | I2C_STAT_NACK);
|
|
|
|
CHECK_NACK();
|
|
|
|
if (!(tmp & I2C_STAT_SCD)) {
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
return 1;
|
|
}
|
|
|
|
flush_rx(adap);
|
|
REG(&(i2c_base->i2c_stat)) = 0xffff;
|
|
REG(&(i2c_base->i2c_cnt)) = 0;
|
|
REG(&(i2c_base->i2c_con)) = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap)
|
|
{
|
|
switch (adap->hwadapnr) {
|
|
#if I2C_BUS_MAX >= 3
|
|
case 2:
|
|
return (struct i2c_regs *)I2C2_BASE;
|
|
#endif
|
|
#if I2C_BUS_MAX >= 2
|
|
case 1:
|
|
return (struct i2c_regs *)I2C1_BASE;
|
|
#endif
|
|
case 0:
|
|
return (struct i2c_regs *)I2C_BASE;
|
|
|
|
default:
|
|
printf("wrong hwadapnr: %d\n", adap->hwadapnr);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
U_BOOT_I2C_ADAP_COMPLETE(davinci_0, davinci_i2c_init, davinci_i2c_probe,
|
|
davinci_i2c_read, davinci_i2c_write,
|
|
davinci_i2c_setspeed,
|
|
CONFIG_SYS_DAVINCI_I2C_SPEED,
|
|
CONFIG_SYS_DAVINCI_I2C_SLAVE,
|
|
0)
|
|
|
|
#if I2C_BUS_MAX >= 2
|
|
U_BOOT_I2C_ADAP_COMPLETE(davinci_1, davinci_i2c_init, davinci_i2c_probe,
|
|
davinci_i2c_read, davinci_i2c_write,
|
|
davinci_i2c_setspeed,
|
|
CONFIG_SYS_DAVINCI_I2C_SPEED1,
|
|
CONFIG_SYS_DAVINCI_I2C_SLAVE1,
|
|
1)
|
|
#endif
|
|
|
|
#if I2C_BUS_MAX >= 3
|
|
U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe,
|
|
davinci_i2c_read, davinci_i2c_write,
|
|
davinci_i2c_setspeed,
|
|
CONFIG_SYS_DAVINCI_I2C_SPEED2,
|
|
CONFIG_SYS_DAVINCI_I2C_SLAVE2,
|
|
2)
|
|
#endif
|