mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
32d858fc4f
This patch adds dt node for DP83867 phy used on K2G ICE board and also enable netcp device nodes for the board. EVM hardware spec recommends to add 0.25 nsec delay in the tx direction and 2.25 nsec delay in the rx direction for internal delay in the clock path to be on the safer side. The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode 1. Unfortunately, the phy data manual disallows this. Add ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to enable workaround suggested for this incorrect strap setting. This ensures proper operation of this PHY. The dts bindings are kept in sync with that from 4.14.y linux kernel. This required the pinmux device related bindings to be commented out to allow for compilation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
118 lines
2.1 KiB
Text
118 lines
2.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Device Tree Source for K2G Industrial Communication Engine EVM
|
|
*
|
|
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "keystone-k2g.dtsi"
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
|
|
/ {
|
|
compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
|
|
model = "Texas Instruments K2G Industrial Communication EVM";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
|
|
flash0: m25p80@0 {
|
|
compatible = "s25fl256s1", "spi-flash";
|
|
reg = <0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <96000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cdns,read-delay = <5>;
|
|
cdns,tshsl-ns = <500>;
|
|
cdns,tsd2d-ns = <500>;
|
|
cdns,tchsh-ns = <119>;
|
|
cdns,tslch-ns = <119>;
|
|
|
|
partition@0 {
|
|
label = "QSPI.u-boot";
|
|
reg = <0x00000000 0x00100000>;
|
|
};
|
|
partition@1 {
|
|
label = "QSPI.u-boot-env";
|
|
reg = <0x00100000 0x00040000>;
|
|
};
|
|
partition@2 {
|
|
label = "QSPI.skern";
|
|
reg = <0x00140000 0x0040000>;
|
|
};
|
|
partition@3 {
|
|
label = "QSPI.pmmc-firmware";
|
|
reg = <0x00180000 0x0040000>;
|
|
};
|
|
partition@4 {
|
|
label = "QSPI.kernel";
|
|
reg = <0x001c0000 0x0800000>;
|
|
};
|
|
partition@5 {
|
|
label = "QSPI.u-boot-spl-os";
|
|
reg = <0x009c0000 0x0040000>;
|
|
};
|
|
partition@6 {
|
|
label = "QSPI.file-system";
|
|
reg = <0x00a00000 0x1600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qmss {
|
|
status = "okay";
|
|
};
|
|
|
|
&knav_dmas {
|
|
status = "okay";
|
|
};
|
|
|
|
&netcp {
|
|
pinctrl-names = "default";
|
|
//pinctrl-0 = <&emac_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-names = "default";
|
|
//pinctrl-0 = <&mdio_pins>;
|
|
status = "okay";
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
|
ti,min-output-impedance;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
};
|
|
};
|
|
|
|
&gbe0 {
|
|
phy-handle = <ðphy0>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
};
|