mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 15:03:18 +00:00
2548493ab4
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
360 lines
9.6 KiB
C
360 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2010-2013 NVIDIA Corporation
|
|
* With help from the mpc8xxx SPI driver
|
|
* With more help from omap3_spi SPI driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <spi.h>
|
|
#include <fdtdec.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include "tegra_spi.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define SPI_CMD_GO BIT(30)
|
|
#define SPI_CMD_ACTIVE_SCLK_SHIFT 26
|
|
#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
|
|
#define SPI_CMD_CK_SDA BIT(21)
|
|
#define SPI_CMD_ACTIVE_SDA_SHIFT 18
|
|
#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT)
|
|
#define SPI_CMD_CS_POL BIT(16)
|
|
#define SPI_CMD_TXEN BIT(15)
|
|
#define SPI_CMD_RXEN BIT(14)
|
|
#define SPI_CMD_CS_VAL BIT(13)
|
|
#define SPI_CMD_CS_SOFT BIT(12)
|
|
#define SPI_CMD_CS_DELAY BIT(9)
|
|
#define SPI_CMD_CS3_EN BIT(8)
|
|
#define SPI_CMD_CS2_EN BIT(7)
|
|
#define SPI_CMD_CS1_EN BIT(6)
|
|
#define SPI_CMD_CS0_EN BIT(5)
|
|
#define SPI_CMD_BIT_LENGTH BIT(4)
|
|
#define SPI_CMD_BIT_LENGTH_MASK GENMASK(4, 0)
|
|
|
|
#define SPI_STAT_BSY BIT(31)
|
|
#define SPI_STAT_RDY BIT(30)
|
|
#define SPI_STAT_RXF_FLUSH BIT(29)
|
|
#define SPI_STAT_TXF_FLUSH BIT(28)
|
|
#define SPI_STAT_RXF_UNR BIT(27)
|
|
#define SPI_STAT_TXF_OVF BIT(26)
|
|
#define SPI_STAT_RXF_EMPTY BIT(25)
|
|
#define SPI_STAT_RXF_FULL BIT(24)
|
|
#define SPI_STAT_TXF_EMPTY BIT(23)
|
|
#define SPI_STAT_TXF_FULL BIT(22)
|
|
#define SPI_STAT_SEL_TXRX_N BIT(16)
|
|
#define SPI_STAT_CUR_BLKCNT BIT(15)
|
|
|
|
#define SPI_TIMEOUT 1000
|
|
#define TEGRA_SPI_MAX_FREQ 52000000
|
|
|
|
struct spi_regs {
|
|
u32 command; /* SPI_COMMAND_0 register */
|
|
u32 status; /* SPI_STATUS_0 register */
|
|
u32 rx_cmp; /* SPI_RX_CMP_0 register */
|
|
u32 dma_ctl; /* SPI_DMA_CTL_0 register */
|
|
u32 tx_fifo; /* SPI_TX_FIFO_0 register */
|
|
u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */
|
|
u32 rx_fifo; /* SPI_RX_FIFO_0 register */
|
|
};
|
|
|
|
struct tegra20_sflash_priv {
|
|
struct spi_regs *regs;
|
|
unsigned int freq;
|
|
unsigned int mode;
|
|
int periph_id;
|
|
int valid;
|
|
int last_transaction_us;
|
|
};
|
|
|
|
int tegra20_sflash_cs_info(struct udevice *bus, unsigned int cs,
|
|
struct spi_cs_info *info)
|
|
{
|
|
/* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
|
|
if (cs != 0)
|
|
return -EINVAL;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int tegra20_sflash_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct tegra_spi_platdata *plat = bus->platdata;
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
|
|
plat->base = dev_read_addr(bus);
|
|
plat->periph_id = clock_decode_periph_id(bus);
|
|
|
|
if (plat->periph_id == PERIPH_ID_NONE) {
|
|
debug("%s: could not decode periph id %d\n", __func__,
|
|
plat->periph_id);
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
|
|
/* Use 500KHz as a suitable default */
|
|
plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
|
|
500000);
|
|
plat->deactivate_delay_us = fdtdec_get_int(blob, node,
|
|
"spi-deactivate-delay", 0);
|
|
debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
|
|
__func__, plat->base, plat->periph_id, plat->frequency,
|
|
plat->deactivate_delay_us);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra20_sflash_probe(struct udevice *bus)
|
|
{
|
|
struct tegra_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->regs = (struct spi_regs *)plat->base;
|
|
|
|
priv->last_transaction_us = timer_get_us();
|
|
priv->freq = plat->frequency;
|
|
priv->periph_id = plat->periph_id;
|
|
|
|
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
|
|
clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
|
|
priv->freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra20_sflash_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
struct spi_regs *regs = priv->regs;
|
|
u32 reg;
|
|
|
|
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
|
|
clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
|
|
priv->freq);
|
|
|
|
/* Clear stale status here */
|
|
reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
|
|
SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
|
|
writel(reg, ®s->status);
|
|
debug("%s: STATUS = %08x\n", __func__, readl(®s->status));
|
|
|
|
/*
|
|
* Use sw-controlled CS, so we can clock in data after ReadID, etc.
|
|
*/
|
|
reg = (priv->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
|
|
if (priv->mode & 2)
|
|
reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
|
|
clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK |
|
|
SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
|
|
debug("%s: COMMAND = %08x\n", __func__, readl(®s->command));
|
|
|
|
/*
|
|
* SPI pins on Tegra20 are muxed - change pinmux later due to UART
|
|
* issue.
|
|
*/
|
|
pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH);
|
|
pinmux_tristate_disable(PMUX_PINGRP_LSPI);
|
|
pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spi_cs_activate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra_spi_platdata *pdata = dev_get_platdata(bus);
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
|
|
/* If it's too soon to do another transaction, wait */
|
|
if (pdata->deactivate_delay_us &&
|
|
priv->last_transaction_us) {
|
|
ulong delay_us; /* The delay completed so far */
|
|
delay_us = timer_get_us() - priv->last_transaction_us;
|
|
if (delay_us < pdata->deactivate_delay_us)
|
|
udelay(pdata->deactivate_delay_us - delay_us);
|
|
}
|
|
|
|
/* CS is negated on Tegra, so drive a 1 to get a 0 */
|
|
setbits_le32(&priv->regs->command, SPI_CMD_CS_VAL);
|
|
}
|
|
|
|
static void spi_cs_deactivate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra_spi_platdata *pdata = dev_get_platdata(bus);
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
|
|
/* CS is negated on Tegra, so drive a 0 to get a 1 */
|
|
clrbits_le32(&priv->regs->command, SPI_CMD_CS_VAL);
|
|
|
|
/* Remember time of this transaction so we can honour the bus delay */
|
|
if (pdata->deactivate_delay_us)
|
|
priv->last_transaction_us = timer_get_us();
|
|
}
|
|
|
|
static int tegra20_sflash_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *data_out, void *data_in,
|
|
unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
struct spi_regs *regs = priv->regs;
|
|
u32 reg, tmpdout, tmpdin = 0;
|
|
const u8 *dout = data_out;
|
|
u8 *din = data_in;
|
|
int num_bytes;
|
|
int ret;
|
|
|
|
debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
|
|
__func__, bus->seq, spi_chip_select(dev), dout, din, bitlen);
|
|
if (bitlen % 8)
|
|
return -1;
|
|
num_bytes = bitlen / 8;
|
|
|
|
ret = 0;
|
|
|
|
reg = readl(®s->status);
|
|
writel(reg, ®s->status); /* Clear all SPI events via R/W */
|
|
debug("spi_xfer entry: STATUS = %08x\n", reg);
|
|
|
|
reg = readl(®s->command);
|
|
reg |= SPI_CMD_TXEN | SPI_CMD_RXEN;
|
|
writel(reg, ®s->command);
|
|
debug("spi_xfer: COMMAND = %08x\n", readl(®s->command));
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(dev);
|
|
|
|
/* handle data in 32-bit chunks */
|
|
while (num_bytes > 0) {
|
|
int bytes;
|
|
int is_read = 0;
|
|
int tm, i;
|
|
|
|
tmpdout = 0;
|
|
bytes = (num_bytes > 4) ? 4 : num_bytes;
|
|
|
|
if (dout != NULL) {
|
|
for (i = 0; i < bytes; ++i)
|
|
tmpdout = (tmpdout << 8) | dout[i];
|
|
}
|
|
|
|
num_bytes -= bytes;
|
|
if (dout)
|
|
dout += bytes;
|
|
|
|
clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK,
|
|
bytes * 8 - 1);
|
|
writel(tmpdout, ®s->tx_fifo);
|
|
setbits_le32(®s->command, SPI_CMD_GO);
|
|
|
|
/*
|
|
* Wait for SPI transmit FIFO to empty, or to time out.
|
|
* The RX FIFO status will be read and cleared last
|
|
*/
|
|
for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
|
|
u32 status;
|
|
|
|
status = readl(®s->status);
|
|
|
|
/* We can exit when we've had both RX and TX activity */
|
|
if (is_read && (status & SPI_STAT_TXF_EMPTY))
|
|
break;
|
|
|
|
if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) !=
|
|
SPI_STAT_RDY)
|
|
tm++;
|
|
|
|
else if (!(status & SPI_STAT_RXF_EMPTY)) {
|
|
tmpdin = readl(®s->rx_fifo);
|
|
is_read = 1;
|
|
|
|
/* swap bytes read in */
|
|
if (din != NULL) {
|
|
for (i = bytes - 1; i >= 0; --i) {
|
|
din[i] = tmpdin & 0xff;
|
|
tmpdin >>= 8;
|
|
}
|
|
din += bytes;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (tm >= SPI_TIMEOUT)
|
|
ret = tm;
|
|
|
|
/* clear ACK RDY, etc. bits */
|
|
writel(readl(®s->status), ®s->status);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(dev);
|
|
|
|
debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n",
|
|
tmpdin, readl(®s->status));
|
|
|
|
if (ret) {
|
|
printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra20_sflash_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct tegra_spi_platdata *plat = bus->platdata;
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
|
|
if (speed > plat->frequency)
|
|
speed = plat->frequency;
|
|
priv->freq = speed;
|
|
debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra20_sflash_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct tegra20_sflash_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->mode = mode;
|
|
debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops tegra20_sflash_ops = {
|
|
.claim_bus = tegra20_sflash_claim_bus,
|
|
.xfer = tegra20_sflash_xfer,
|
|
.set_speed = tegra20_sflash_set_speed,
|
|
.set_mode = tegra20_sflash_set_mode,
|
|
.cs_info = tegra20_sflash_cs_info,
|
|
};
|
|
|
|
static const struct udevice_id tegra20_sflash_ids[] = {
|
|
{ .compatible = "nvidia,tegra20-sflash" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(tegra20_sflash) = {
|
|
.name = "tegra20_sflash",
|
|
.id = UCLASS_SPI,
|
|
.of_match = tegra20_sflash_ids,
|
|
.ops = &tegra20_sflash_ops,
|
|
.ofdata_to_platdata = tegra20_sflash_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct tegra_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct tegra20_sflash_priv),
|
|
.probe = tegra20_sflash_probe,
|
|
};
|