mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 15:03:18 +00:00
b75d8dc564
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
854 lines
23 KiB
C
854 lines
23 KiB
C
/*
|
|
ns8382x.c: A U-Boot driver for the NatSemi DP8382[01].
|
|
ported by: Mark A. Rakes (mark_rakes@vivato.net)
|
|
|
|
Adapted from:
|
|
1. an Etherboot driver for DP8381[56] written by:
|
|
Copyright (C) 2001 Entity Cyber, Inc.
|
|
|
|
This development of this Etherboot driver was funded by
|
|
Sicom Systems: http://www.sicompos.com/
|
|
|
|
Author: Marty Connor (mdc@thinguin.org)
|
|
Adapted from a Linux driver which was written by Donald Becker
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU Public License (GPL), incorporated herein by reference.
|
|
|
|
2. A Linux driver by Donald Becker, ns820.c:
|
|
Written/copyright 1999-2002 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL. License for under other terms may be
|
|
available. Contact the original author for details.
|
|
|
|
The original author may be reached as becker@scyld.com, or at
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
Support information and updates available at
|
|
http://www.scyld.com/network/netsemi.html
|
|
|
|
Datasheets available from:
|
|
http://www.national.com/pf/DP/DP83820.html
|
|
http://www.national.com/pf/DP/DP83821.html
|
|
*/
|
|
|
|
/* Revision History
|
|
* October 2002 mar 1.0
|
|
* Initial U-Boot Release.
|
|
* Tested with Netgear GA622T (83820)
|
|
* and SMC9452TX (83821)
|
|
* NOTE: custom boards with these chips may (likely) require
|
|
* a programmed EEPROM device (if present) in order to work
|
|
* correctly.
|
|
*/
|
|
|
|
/* Includes */
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* defines */
|
|
#define DSIZE 0x00000FFF
|
|
#define CRC_SIZE 4
|
|
#define TOUT_LOOP 500000
|
|
#define TX_BUF_SIZE 1536
|
|
#define RX_BUF_SIZE 1536
|
|
#define NUM_RX_DESC 4 /* Number of Rx descriptor registers. */
|
|
|
|
enum register_offsets {
|
|
ChipCmd = 0x00,
|
|
ChipConfig = 0x04,
|
|
EECtrl = 0x08,
|
|
IntrMask = 0x14,
|
|
IntrEnable = 0x18,
|
|
TxRingPtr = 0x20,
|
|
TxRingPtrHi = 0x24,
|
|
TxConfig = 0x28,
|
|
RxRingPtr = 0x30,
|
|
RxRingPtrHi = 0x34,
|
|
RxConfig = 0x38,
|
|
PriQueue = 0x3C,
|
|
RxFilterAddr = 0x48,
|
|
RxFilterData = 0x4C,
|
|
ClkRun = 0xCC,
|
|
PCIPM = 0x44,
|
|
};
|
|
|
|
enum ChipCmdBits {
|
|
ChipReset = 0x100,
|
|
RxReset = 0x20,
|
|
TxReset = 0x10,
|
|
RxOff = 0x08,
|
|
RxOn = 0x04,
|
|
TxOff = 0x02,
|
|
TxOn = 0x01
|
|
};
|
|
|
|
enum ChipConfigBits {
|
|
LinkSts = 0x80000000,
|
|
GigSpeed = 0x40000000,
|
|
HundSpeed = 0x20000000,
|
|
FullDuplex = 0x10000000,
|
|
TBIEn = 0x01000000,
|
|
Mode1000 = 0x00400000,
|
|
T64En = 0x00004000,
|
|
D64En = 0x00001000,
|
|
M64En = 0x00000800,
|
|
PhyRst = 0x00000400,
|
|
PhyDis = 0x00000200,
|
|
ExtStEn = 0x00000100,
|
|
BEMode = 0x00000001,
|
|
};
|
|
#define SpeedStatus_Polarity ( GigSpeed | HundSpeed | FullDuplex)
|
|
|
|
enum TxConfig_bits {
|
|
TxDrthMask = 0x000000ff,
|
|
TxFlthMask = 0x0000ff00,
|
|
TxMxdmaMask = 0x00700000,
|
|
TxMxdma_8 = 0x00100000,
|
|
TxMxdma_16 = 0x00200000,
|
|
TxMxdma_32 = 0x00300000,
|
|
TxMxdma_64 = 0x00400000,
|
|
TxMxdma_128 = 0x00500000,
|
|
TxMxdma_256 = 0x00600000,
|
|
TxMxdma_512 = 0x00700000,
|
|
TxMxdma_1024 = 0x00000000,
|
|
TxCollRetry = 0x00800000,
|
|
TxAutoPad = 0x10000000,
|
|
TxMacLoop = 0x20000000,
|
|
TxHeartIgn = 0x40000000,
|
|
TxCarrierIgn = 0x80000000
|
|
};
|
|
|
|
enum RxConfig_bits {
|
|
RxDrthMask = 0x0000003e,
|
|
RxMxdmaMask = 0x00700000,
|
|
RxMxdma_8 = 0x00100000,
|
|
RxMxdma_16 = 0x00200000,
|
|
RxMxdma_32 = 0x00300000,
|
|
RxMxdma_64 = 0x00400000,
|
|
RxMxdma_128 = 0x00500000,
|
|
RxMxdma_256 = 0x00600000,
|
|
RxMxdma_512 = 0x00700000,
|
|
RxMxdma_1024 = 0x00000000,
|
|
RxAcceptLenErr = 0x04000000,
|
|
RxAcceptLong = 0x08000000,
|
|
RxAcceptTx = 0x10000000,
|
|
RxStripCRC = 0x20000000,
|
|
RxAcceptRunt = 0x40000000,
|
|
RxAcceptErr = 0x80000000,
|
|
};
|
|
|
|
/* Bits in the RxMode register. */
|
|
enum rx_mode_bits {
|
|
RxFilterEnable = 0x80000000,
|
|
AcceptAllBroadcast = 0x40000000,
|
|
AcceptAllMulticast = 0x20000000,
|
|
AcceptAllUnicast = 0x10000000,
|
|
AcceptPerfectMatch = 0x08000000,
|
|
};
|
|
|
|
typedef struct _BufferDesc {
|
|
u32 link;
|
|
u32 bufptr;
|
|
vu_long cmdsts;
|
|
u32 extsts; /*not used here */
|
|
} BufferDesc;
|
|
|
|
/* Bits in network_desc.status */
|
|
enum desc_status_bits {
|
|
DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
|
|
DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
|
|
DescSizeMask = 0xfff,
|
|
|
|
DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
|
|
DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
|
|
DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
|
|
DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
|
|
|
|
DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
|
|
DescRxDest = 0x01800000, DescRxLong = 0x00400000,
|
|
DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
|
|
DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
|
|
DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
|
|
};
|
|
|
|
/* Bits in MEAR */
|
|
enum mii_reg_bits {
|
|
MDIO_ShiftClk = 0x0040,
|
|
MDIO_EnbOutput = 0x0020,
|
|
MDIO_Data = 0x0010,
|
|
};
|
|
|
|
/* PHY Register offsets. */
|
|
enum phy_reg_offsets {
|
|
BMCR = 0x00,
|
|
BMSR = 0x01,
|
|
PHYIDR1 = 0x02,
|
|
PHYIDR2 = 0x03,
|
|
ANAR = 0x04,
|
|
KTCR = 0x09,
|
|
};
|
|
|
|
/* basic mode control register bits */
|
|
enum bmcr_bits {
|
|
Bmcr_Reset = 0x8000,
|
|
Bmcr_Loop = 0x4000,
|
|
Bmcr_Speed0 = 0x2000,
|
|
Bmcr_AutoNegEn = 0x1000, /*if set ignores Duplex, Speed[01] */
|
|
Bmcr_RstAutoNeg = 0x0200,
|
|
Bmcr_Duplex = 0x0100,
|
|
Bmcr_Speed1 = 0x0040,
|
|
Bmcr_Force10H = 0x0000,
|
|
Bmcr_Force10F = 0x0100,
|
|
Bmcr_Force100H = 0x2000,
|
|
Bmcr_Force100F = 0x2100,
|
|
Bmcr_Force1000H = 0x0040,
|
|
Bmcr_Force1000F = 0x0140,
|
|
};
|
|
|
|
/* auto negotiation advertisement register */
|
|
enum anar_bits {
|
|
anar_adv_100F = 0x0100,
|
|
anar_adv_100H = 0x0080,
|
|
anar_adv_10F = 0x0040,
|
|
anar_adv_10H = 0x0020,
|
|
anar_ieee_8023 = 0x0001,
|
|
};
|
|
|
|
/* 1K-base T control register */
|
|
enum ktcr_bits {
|
|
ktcr_adv_1000H = 0x0100,
|
|
ktcr_adv_1000F = 0x0200,
|
|
};
|
|
|
|
/* Globals */
|
|
static u32 SavedClkRun;
|
|
static unsigned int cur_rx;
|
|
static unsigned int rx_config;
|
|
static unsigned int tx_config;
|
|
|
|
/* Note: transmit and receive buffers and descriptors must be
|
|
long long word aligned */
|
|
static BufferDesc txd __attribute__ ((aligned(8)));
|
|
static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(8)));
|
|
static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(8)));
|
|
static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
|
|
__attribute__ ((aligned(8)));
|
|
|
|
/* Function Prototypes */
|
|
static int mdio_read(struct eth_device *dev, int phy_id, int addr);
|
|
static void mdio_write(struct eth_device *dev, int phy_id, int addr, int value);
|
|
static void mdio_sync(struct eth_device *dev, u32 offset);
|
|
static int ns8382x_init(struct eth_device *dev, struct bd_info * bis);
|
|
static void ns8382x_reset(struct eth_device *dev);
|
|
static void ns8382x_init_rxfilter(struct eth_device *dev);
|
|
static void ns8382x_init_txd(struct eth_device *dev);
|
|
static void ns8382x_init_rxd(struct eth_device *dev);
|
|
static void ns8382x_set_rx_mode(struct eth_device *dev);
|
|
static void ns8382x_check_duplex(struct eth_device *dev);
|
|
static int ns8382x_send(struct eth_device *dev, void *packet, int length);
|
|
static int ns8382x_poll(struct eth_device *dev);
|
|
static void ns8382x_disable(struct eth_device *dev);
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83820},
|
|
{}
|
|
};
|
|
|
|
#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
|
|
#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
|
|
|
|
static inline int
|
|
INW(struct eth_device *dev, u_long addr)
|
|
{
|
|
return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
|
|
}
|
|
|
|
static int
|
|
INL(struct eth_device *dev, u_long addr)
|
|
{
|
|
return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
|
|
}
|
|
|
|
static inline void
|
|
OUTW(struct eth_device *dev, int command, u_long addr)
|
|
{
|
|
*(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
|
|
}
|
|
|
|
static inline void
|
|
OUTL(struct eth_device *dev, int command, u_long addr)
|
|
{
|
|
*(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
|
|
}
|
|
|
|
/* Function: ns8382x_initialize
|
|
* Description: Retrieves the MAC address of the card, and sets up some
|
|
* globals required by other routines, and initializes the NIC, making it
|
|
* ready to send and receive packets.
|
|
* Side effects: initializes ns8382xs, ready to receive packets.
|
|
* Returns: int: number of cards found
|
|
*/
|
|
|
|
int
|
|
ns8382x_initialize(struct bd_info * bis)
|
|
{
|
|
pci_dev_t devno;
|
|
int card_number = 0;
|
|
struct eth_device *dev;
|
|
u32 iobase, status;
|
|
int i, idx = 0;
|
|
u32 phyAddress;
|
|
u32 tmp;
|
|
u32 chip_config;
|
|
|
|
while (1) { /* Find PCI device(s) */
|
|
if ((devno = pci_find_devices(supported, idx++)) < 0)
|
|
break;
|
|
|
|
pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
|
|
iobase &= ~0x3; /* 1: unused and 0:I/O Space Indicator */
|
|
|
|
debug("ns8382x: NatSemi dp8382x @ 0x%x\n", iobase);
|
|
|
|
pci_write_config_dword(devno, PCI_COMMAND,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
|
|
/* Check if I/O accesses and Bus Mastering are enabled. */
|
|
pci_read_config_dword(devno, PCI_COMMAND, &status);
|
|
if (!(status & PCI_COMMAND_MEMORY)) {
|
|
printf("Error: Can not enable MEM access.\n");
|
|
continue;
|
|
} else if (!(status & PCI_COMMAND_MASTER)) {
|
|
printf("Error: Can not enable Bus Mastering.\n");
|
|
continue;
|
|
}
|
|
|
|
dev = (struct eth_device *) malloc(sizeof *dev);
|
|
if (!dev) {
|
|
printf("ns8382x: Can not allocate memory\n");
|
|
break;
|
|
}
|
|
memset(dev, 0, sizeof(*dev));
|
|
|
|
sprintf(dev->name, "dp8382x#%d", card_number);
|
|
dev->iobase = bus_to_phys(iobase);
|
|
dev->priv = (void *) devno;
|
|
dev->init = ns8382x_init;
|
|
dev->halt = ns8382x_disable;
|
|
dev->send = ns8382x_send;
|
|
dev->recv = ns8382x_poll;
|
|
|
|
/* ns8382x has a non-standard PM control register
|
|
* in PCI config space. Some boards apparently need
|
|
* to be brought to D0 in this manner. */
|
|
pci_read_config_dword(devno, PCIPM, &tmp);
|
|
if (tmp & (0x03 | 0x100)) { /* D0 state, disable PME assertion */
|
|
u32 newtmp = tmp & ~(0x03 | 0x100);
|
|
pci_write_config_dword(devno, PCIPM, newtmp);
|
|
}
|
|
|
|
/* get MAC address */
|
|
for (i = 0; i < 3; i++) {
|
|
u32 data;
|
|
char *mac = (char *)&dev->enetaddr[i * 2];
|
|
|
|
OUTL(dev, i * 2, RxFilterAddr);
|
|
data = INL(dev, RxFilterData);
|
|
*mac++ = data;
|
|
*mac++ = data >> 8;
|
|
}
|
|
/* get PHY address, can't be zero */
|
|
for (phyAddress = 1; phyAddress < 32; phyAddress++) {
|
|
u32 rev, phy1;
|
|
|
|
phy1 = mdio_read(dev, phyAddress, PHYIDR1);
|
|
if (phy1 == 0x2000) { /*check for 83861/91 */
|
|
rev = mdio_read(dev, phyAddress, PHYIDR2);
|
|
if ((rev & ~(0x000f)) == 0x00005c50 ||
|
|
(rev & ~(0x000f)) == 0x00005c60) {
|
|
debug("phy rev is %x\n", rev);
|
|
debug("phy address is %x\n",
|
|
phyAddress);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* set phy to autonegotiate && advertise everything */
|
|
mdio_write(dev, phyAddress, KTCR,
|
|
(ktcr_adv_1000H | ktcr_adv_1000F));
|
|
mdio_write(dev, phyAddress, ANAR,
|
|
(anar_adv_100F | anar_adv_100H | anar_adv_10H |
|
|
anar_adv_10F | anar_ieee_8023));
|
|
mdio_write(dev, phyAddress, BMCR, 0x0); /*restore */
|
|
mdio_write(dev, phyAddress, BMCR,
|
|
(Bmcr_AutoNegEn | Bmcr_RstAutoNeg));
|
|
/* Reset the chip to erase any previous misconfiguration. */
|
|
OUTL(dev, (ChipReset), ChipCmd);
|
|
|
|
chip_config = INL(dev, ChipConfig);
|
|
/* reset the phy */
|
|
OUTL(dev, (chip_config | PhyRst), ChipConfig);
|
|
/* power up and initialize transceiver */
|
|
OUTL(dev, (chip_config & ~(PhyDis)), ChipConfig);
|
|
|
|
mdio_sync(dev, EECtrl);
|
|
|
|
{
|
|
u32 chpcfg =
|
|
INL(dev, ChipConfig) ^ SpeedStatus_Polarity;
|
|
|
|
debug("%s: Transceiver 10%s %s duplex.\n", dev->name,
|
|
(chpcfg & GigSpeed) ? "00" : (chpcfg & HundSpeed)
|
|
? "0" : "",
|
|
chpcfg & FullDuplex ? "full" : "half");
|
|
debug("%s: %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
|
|
dev->enetaddr[0], dev->enetaddr[1],
|
|
dev->enetaddr[2], dev->enetaddr[3],
|
|
dev->enetaddr[4], dev->enetaddr[5]);
|
|
}
|
|
|
|
/* Disable PME:
|
|
* The PME bit is initialized from the EEPROM contents.
|
|
* PCI cards probably have PME disabled, but motherboard
|
|
* implementations may have PME set to enable WakeOnLan.
|
|
* With PME set the chip will scan incoming packets but
|
|
* nothing will be written to memory. */
|
|
SavedClkRun = INL(dev, ClkRun);
|
|
OUTL(dev, SavedClkRun & ~0x100, ClkRun);
|
|
|
|
eth_register(dev);
|
|
|
|
card_number++;
|
|
|
|
pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x60);
|
|
|
|
udelay(10 * 1000);
|
|
}
|
|
return card_number;
|
|
}
|
|
|
|
/* MII transceiver control section.
|
|
Read and write MII registers using software-generated serial MDIO
|
|
protocol. See the MII specifications or DP83840A data sheet for details.
|
|
|
|
The maximum data clock rate is 2.5 MHz. To meet minimum timing we
|
|
must flush writes to the PCI bus with a PCI read. */
|
|
#define mdio_delay(mdio_addr) INL(dev, mdio_addr)
|
|
|
|
#define MDIO_EnbIn (0)
|
|
#define MDIO_WRITE0 (MDIO_EnbOutput)
|
|
#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput)
|
|
|
|
/* Generate the preamble required for initial synchronization and
|
|
a few older transceivers. */
|
|
static void
|
|
mdio_sync(struct eth_device *dev, u32 offset)
|
|
{
|
|
int bits = 32;
|
|
|
|
/* Establish sync by sending at least 32 logic ones. */
|
|
while (--bits >= 0) {
|
|
OUTL(dev, MDIO_WRITE1, offset);
|
|
mdio_delay(offset);
|
|
OUTL(dev, MDIO_WRITE1 | MDIO_ShiftClk, offset);
|
|
mdio_delay(offset);
|
|
}
|
|
}
|
|
|
|
static int
|
|
mdio_read(struct eth_device *dev, int phy_id, int addr)
|
|
{
|
|
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | addr;
|
|
int i, retval = 0;
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
|
|
OUTL(dev, dataval, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
OUTL(dev, dataval | MDIO_ShiftClk, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
}
|
|
/* Read the two transition, 16 data, and wire-idle bits. */
|
|
for (i = 19; i > 0; i--) {
|
|
OUTL(dev, MDIO_EnbIn, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
retval =
|
|
(retval << 1) | ((INL(dev, EECtrl) & MDIO_Data) ? 1 : 0);
|
|
OUTL(dev, MDIO_EnbIn | MDIO_ShiftClk, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
}
|
|
return (retval >> 1) & 0xffff;
|
|
}
|
|
|
|
static void
|
|
mdio_write(struct eth_device *dev, int phy_id, int addr, int value)
|
|
{
|
|
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (addr << 18) | value;
|
|
int i;
|
|
|
|
/* Shift the command bits out. */
|
|
for (i = 31; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
|
|
OUTL(dev, dataval, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
OUTL(dev, dataval | MDIO_ShiftClk, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
}
|
|
/* Clear out extra bits. */
|
|
for (i = 2; i > 0; i--) {
|
|
OUTL(dev, MDIO_EnbIn, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
OUTL(dev, MDIO_EnbIn | MDIO_ShiftClk, EECtrl);
|
|
mdio_delay(EECtrl);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Function: ns8382x_init
|
|
* Description: resets the ethernet controller chip and configures
|
|
* registers and data structures required for sending and receiving packets.
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* returns: int.
|
|
*/
|
|
|
|
static int
|
|
ns8382x_init(struct eth_device *dev, struct bd_info * bis)
|
|
{
|
|
u32 config;
|
|
|
|
ns8382x_reset(dev);
|
|
|
|
/* Disable PME:
|
|
* The PME bit is initialized from the EEPROM contents.
|
|
* PCI cards probably have PME disabled, but motherboard
|
|
* implementations may have PME set to enable WakeOnLan.
|
|
* With PME set the chip will scan incoming packets but
|
|
* nothing will be written to memory. */
|
|
OUTL(dev, SavedClkRun & ~0x100, ClkRun);
|
|
|
|
ns8382x_init_rxfilter(dev);
|
|
ns8382x_init_txd(dev);
|
|
ns8382x_init_rxd(dev);
|
|
|
|
/*set up ChipConfig */
|
|
config = INL(dev, ChipConfig);
|
|
/*turn off 64 bit ops && Ten-bit interface
|
|
* && big-endian mode && extended status */
|
|
config &= ~(TBIEn | Mode1000 | T64En | D64En | M64En | BEMode | PhyDis | ExtStEn);
|
|
OUTL(dev, config, ChipConfig);
|
|
|
|
/* Configure the PCI bus bursts and FIFO thresholds. */
|
|
tx_config = TxCarrierIgn | TxHeartIgn | TxAutoPad
|
|
| TxCollRetry | TxMxdma_1024 | (0x1002);
|
|
rx_config = RxMxdma_1024 | 0x20;
|
|
|
|
debug("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
|
|
debug("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
|
|
|
|
OUTL(dev, tx_config, TxConfig);
|
|
OUTL(dev, rx_config, RxConfig);
|
|
|
|
/*turn off priority queueing */
|
|
OUTL(dev, 0x0, PriQueue);
|
|
|
|
ns8382x_check_duplex(dev);
|
|
ns8382x_set_rx_mode(dev);
|
|
|
|
OUTL(dev, (RxOn | TxOn), ChipCmd);
|
|
return 1;
|
|
}
|
|
|
|
/* Function: ns8382x_reset
|
|
* Description: soft resets the controller chip
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* Returns: void.
|
|
*/
|
|
static void
|
|
ns8382x_reset(struct eth_device *dev)
|
|
{
|
|
OUTL(dev, ChipReset, ChipCmd);
|
|
while (INL(dev, ChipCmd))
|
|
/*wait until done */ ;
|
|
OUTL(dev, 0, IntrMask);
|
|
OUTL(dev, 0, IntrEnable);
|
|
}
|
|
|
|
/* Function: ns8382x_init_rxfilter
|
|
* Description: sets receive filter address to our MAC address
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* returns: void.
|
|
*/
|
|
|
|
static void
|
|
ns8382x_init_rxfilter(struct eth_device *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ETH_ALEN; i += 2) {
|
|
OUTL(dev, i, RxFilterAddr);
|
|
OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
|
|
RxFilterData);
|
|
}
|
|
}
|
|
|
|
/* Function: ns8382x_init_txd
|
|
* Description: initializes the Tx descriptor
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* returns: void.
|
|
*/
|
|
|
|
static void
|
|
ns8382x_init_txd(struct eth_device *dev)
|
|
{
|
|
txd.link = (u32) 0;
|
|
txd.bufptr = cpu_to_le32((u32) & txb[0]);
|
|
txd.cmdsts = (u32) 0;
|
|
txd.extsts = (u32) 0;
|
|
|
|
OUTL(dev, 0x0, TxRingPtrHi);
|
|
OUTL(dev, phys_to_bus((u32)&txd), TxRingPtr);
|
|
|
|
debug("ns8382x_init_txd: TX descriptor register loaded with: %#08X (&txd: %p)\n",
|
|
INL(dev, TxRingPtr), &txd);
|
|
}
|
|
|
|
/* Function: ns8382x_init_rxd
|
|
* Description: initializes the Rx descriptor ring
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* Returns: void.
|
|
*/
|
|
|
|
static void
|
|
ns8382x_init_rxd(struct eth_device *dev)
|
|
{
|
|
int i;
|
|
|
|
OUTL(dev, 0x0, RxRingPtrHi);
|
|
|
|
cur_rx = 0;
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
rxd[i].link =
|
|
cpu_to_le32((i + 1 <
|
|
NUM_RX_DESC) ? (u32) & rxd[i +
|
|
1] : (u32) &
|
|
rxd[0]);
|
|
rxd[i].extsts = cpu_to_le32((u32) 0x0);
|
|
rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
|
|
rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
|
|
|
|
debug
|
|
("ns8382x_init_rxd: rxd[%d]=%p link=%X cmdsts=%X bufptr=%X\n",
|
|
i, &rxd[i], le32_to_cpu(rxd[i].link),
|
|
le32_to_cpu(rxd[i].cmdsts), le32_to_cpu(rxd[i].bufptr));
|
|
}
|
|
OUTL(dev, phys_to_bus((u32) & rxd), RxRingPtr);
|
|
|
|
debug("ns8382x_init_rxd: RX descriptor register loaded with: %X\n",
|
|
INL(dev, RxRingPtr));
|
|
}
|
|
|
|
/* Function: ns8382x_set_rx_mode
|
|
* Description:
|
|
* sets the receive mode to accept all broadcast packets and packets
|
|
* with our MAC address, and reject all multicast packets.
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* Returns: void.
|
|
*/
|
|
|
|
static void
|
|
ns8382x_set_rx_mode(struct eth_device *dev)
|
|
{
|
|
u32 rx_mode = 0x0;
|
|
/*spec says RxFilterEnable has to be 0 for rest of
|
|
* this stuff to be properly configured. Linux driver
|
|
* seems to support this*/
|
|
/* OUTL(dev, rx_mode, RxFilterAddr);*/
|
|
rx_mode = (RxFilterEnable | AcceptAllBroadcast | AcceptPerfectMatch);
|
|
OUTL(dev, rx_mode, RxFilterAddr);
|
|
printf("ns8382x_set_rx_mode: set to %X\n", rx_mode);
|
|
/*now we turn RxFilterEnable back on */
|
|
/*rx_mode |= RxFilterEnable;
|
|
OUTL(dev, rx_mode, RxFilterAddr);*/
|
|
}
|
|
|
|
static void
|
|
ns8382x_check_duplex(struct eth_device *dev)
|
|
{
|
|
int gig = 0;
|
|
int hun = 0;
|
|
int duplex = 0;
|
|
int config = (INL(dev, ChipConfig) ^ SpeedStatus_Polarity);
|
|
|
|
duplex = (config & FullDuplex) ? 1 : 0;
|
|
gig = (config & GigSpeed) ? 1 : 0;
|
|
hun = (config & HundSpeed) ? 1 : 0;
|
|
|
|
debug("%s: Setting 10%s %s-duplex based on negotiated link"
|
|
" capability.\n", dev->name, (gig) ? "00" : (hun) ? "0" : "",
|
|
duplex ? "full" : "half");
|
|
|
|
if (duplex) {
|
|
rx_config |= RxAcceptTx;
|
|
tx_config |= (TxCarrierIgn | TxHeartIgn);
|
|
} else {
|
|
rx_config &= ~RxAcceptTx;
|
|
tx_config &= ~(TxCarrierIgn | TxHeartIgn);
|
|
}
|
|
|
|
debug("%s: Resetting TxConfig Register %#08X\n", dev->name, tx_config);
|
|
debug("%s: Resetting RxConfig Register %#08X\n", dev->name, rx_config);
|
|
|
|
OUTL(dev, tx_config, TxConfig);
|
|
OUTL(dev, rx_config, RxConfig);
|
|
|
|
/*if speed is 10 or 100, remove MODE1000,
|
|
* if it's 1000, then set it */
|
|
config = INL(dev, ChipConfig);
|
|
if (gig)
|
|
config |= Mode1000;
|
|
else
|
|
config &= ~Mode1000;
|
|
|
|
debug("%s: %setting Mode1000\n", dev->name, (gig) ? "S" : "Uns");
|
|
|
|
OUTL(dev, config, ChipConfig);
|
|
}
|
|
|
|
/* Function: ns8382x_send
|
|
* Description: transmits a packet and waits for completion or timeout.
|
|
* Returns: void. */
|
|
static int ns8382x_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
u32 i, status = 0;
|
|
vu_long tx_stat = 0;
|
|
|
|
/* Stop the transmitter */
|
|
OUTL(dev, TxOff, ChipCmd);
|
|
|
|
debug("ns8382x_send: sending %d bytes\n", (int)length);
|
|
|
|
/* set the transmit buffer descriptor and enable Transmit State Machine */
|
|
txd.link = cpu_to_le32(0x0);
|
|
txd.bufptr = cpu_to_le32(phys_to_bus((u32)packet));
|
|
txd.extsts = cpu_to_le32(0x0);
|
|
txd.cmdsts = cpu_to_le32(DescOwn | length);
|
|
|
|
/* load Transmit Descriptor Register */
|
|
OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
|
|
|
|
debug("ns8382x_send: TX descriptor register loaded with: %#08X\n",
|
|
INL(dev, TxRingPtr));
|
|
debug("\ttxd.link:%X\tbufp:%X\texsts:%X\tcmdsts:%X\n",
|
|
le32_to_cpu(txd.link), le32_to_cpu(txd.bufptr),
|
|
le32_to_cpu(txd.extsts), le32_to_cpu(txd.cmdsts));
|
|
|
|
/* restart the transmitter */
|
|
OUTL(dev, TxOn, ChipCmd);
|
|
|
|
for (i = 0; (tx_stat = le32_to_cpu(txd.cmdsts)) & DescOwn; i++) {
|
|
if (i >= TOUT_LOOP) {
|
|
printf ("%s: tx error buffer not ready: txd.cmdsts %#lX\n",
|
|
dev->name, tx_stat);
|
|
goto Done;
|
|
}
|
|
}
|
|
|
|
if (!(tx_stat & DescPktOK)) {
|
|
printf("ns8382x_send: Transmit error, Tx status %lX.\n", tx_stat);
|
|
goto Done;
|
|
}
|
|
|
|
debug("ns8382x_send: tx_stat: %#08lX\n", tx_stat);
|
|
|
|
status = 1;
|
|
Done:
|
|
return status;
|
|
}
|
|
|
|
/* Function: ns8382x_poll
|
|
* Description: checks for a received packet and returns it if found.
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* Returns: 1 if packet was received.
|
|
* 0 if no packet was received.
|
|
* Side effects:
|
|
* Returns (copies) the packet to the array dev->packet.
|
|
* Returns the length of the packet.
|
|
*/
|
|
|
|
static int
|
|
ns8382x_poll(struct eth_device *dev)
|
|
{
|
|
int retstat = 0;
|
|
int length = 0;
|
|
vu_long rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
|
|
|
|
if (!(rx_status & (u32) DescOwn))
|
|
return retstat;
|
|
|
|
debug("ns8382x_poll: got a packet: cur_rx:%u, status:%lx\n",
|
|
cur_rx, rx_status);
|
|
|
|
length = (rx_status & DSIZE) - CRC_SIZE;
|
|
|
|
if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
|
|
/* corrupted packet received */
|
|
printf("ns8382x_poll: Corrupted packet, status:%lx\n",
|
|
rx_status);
|
|
retstat = 0;
|
|
} else {
|
|
/* give packet to higher level routine */
|
|
net_process_received_packet((rxb + cur_rx * RX_BUF_SIZE),
|
|
length);
|
|
retstat = 1;
|
|
}
|
|
|
|
/* return the descriptor and buffer to receive ring */
|
|
rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
|
|
rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
|
|
|
|
if (++cur_rx == NUM_RX_DESC)
|
|
cur_rx = 0;
|
|
|
|
/* re-enable the potentially idle receive state machine */
|
|
OUTL(dev, RxOn, ChipCmd);
|
|
|
|
return retstat;
|
|
}
|
|
|
|
/* Function: ns8382x_disable
|
|
* Description: Turns off interrupts and stops Tx and Rx engines
|
|
* Arguments: struct eth_device *dev: NIC data structure
|
|
* Returns: void.
|
|
*/
|
|
|
|
static void
|
|
ns8382x_disable(struct eth_device *dev)
|
|
{
|
|
/* Disable interrupts using the mask. */
|
|
OUTL(dev, 0, IntrMask);
|
|
OUTL(dev, 0, IntrEnable);
|
|
|
|
/* Stop the chip's Tx and Rx processes. */
|
|
OUTL(dev, (RxOff | TxOff), ChipCmd);
|
|
|
|
/* Restore PME enable bit */
|
|
OUTL(dev, SavedClkRun, ClkRun);
|
|
}
|