u-boot/configs/p3450-0000_defconfig
Thierry Reding 9c2f454647 ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
This command is useful to power off the system from within U-Boot.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom <twarren@nvidia.com>
2023-06-23 13:43:48 +02:00

66 lines
1.6 KiB
Text

CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_COUNTER_FREQUENCY=19200000
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80080000
CONFIG_SYS_MALLOC_LEN=0x2500000
CONFIG_NR_DRAM_BANKS=2
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="tegra210-p3450-0000"
CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # "
CONFIG_TEGRA210=y
CONFIG_TARGET_P3450_0000=y
CONFIG_TEGRA_GPU=y
CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_PCI=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2089
CONFIG_SYS_BOOTM_LEN=0x800000
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_PREFER_SERVERIP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_LIVE=y
CONFIG_ENV_OVERWRITE=y
# CONFIG_ENV_IS_IN_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SPI_MAX_HZ=48000000
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
CONFIG_SYS_DFU_MAX_FILE_SIZE=0x2000000
CONFIG_SYS_I2C_TEGRA=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_RTL8169=y
CONFIG_NVME_PCI=y
CONFIG_PCI_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA114_SPI=y
CONFIG_TEGRA210_QSPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y