u-boot/arch/arm/include/asm/arch-lpc32xx/emc.h
Albert ARIBAUD \(3ADEV\) 412ae53aad lpc32xx: add support for board work_92105
Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB or 128MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
  - EEPROM (24M01-compatible)
  - RTC (DS1374-compatible)
  - Temperature sensor (DS620)
  - DACs (2 x MAX518)
- SPI (through SSP interface)
  - Port expander MAX6957
- LCD display (HD44780-compatible), controlled
  through the port expander and DACs

This board has SPL support, and uses the LPC32XX boot
image format.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-04-10 14:23:39 +02:00

100 lines
3.3 KiB
C

/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _LPC32XX_EMC_H
#define _LPC32XX_EMC_H
#include <asm/types.h>
/* EMC Registers */
struct emc_regs {
u32 ctrl; /* Controls operation of the EMC */
u32 status; /* Provides EMC status information */
u32 config; /* Configures operation of the EMC */
u32 reserved0[5];
u32 control; /* Controls dyn memory operation */
u32 refresh; /* Configures dyn memory refresh operation */
u32 read_config; /* Configures the dyn memory read strategy */
u32 reserved1;
u32 t_rp; /* Precharge command period */
u32 t_ras; /* Active to precharge command period */
u32 t_srex; /* Self-refresh exit time */
u32 reserved2[2];
u32 t_wr; /* Write recovery time */
u32 t_rc; /* Active to active command period */
u32 t_rfc; /* Auto-refresh period */
u32 t_xsr; /* Exit self-refresh to active command time */
u32 t_rrd; /* Active bank A to active bank B latency */
u32 t_mrd; /* Load mode register to active command time */
u32 t_cdlr; /* Last data in to read command time */
u32 reserved3[8];
u32 extended_wait; /* time for static memory rd/wr transfers */
u32 reserved4[31];
u32 config0; /* Configuration information for the SDRAM */
u32 rascas0; /* RAS and CAS latencies for the SDRAM */
u32 reserved5[6];
u32 config1; /* Configuration information for the SDRAM */
u32 rascas1; /* RAS and CAS latencies for the SDRAM */
u32 reserved6[54];
struct emc_stat_t {
u32 config; /* Static memory configuration */
u32 waitwen; /* Delay from chip select to write enable */
u32 waitoen; /* Delay to output enable */
u32 waitrd; /* Delay to a read access */
u32 waitpage; /* Delay for async page mode read */
u32 waitwr; /* Delay to a write access */
u32 waitturn; /* Number of bus turnaround cycles */
u32 reserved;
} stat[4];
u32 reserved7[96];
struct emc_ahb_t {
u32 control; /* Control register for AHB */
u32 status; /* Status register for AHB */
u32 timeout; /* Timeout register for AHB */
u32 reserved[5];
} ahb[5];
};
/* Static Memory Configuration Register bits */
#define EMC_STAT_CONFIG_WP (1 << 20)
#define EMC_STAT_CONFIG_EW (1 << 8)
#define EMC_STAT_CONFIG_PB (1 << 7)
#define EMC_STAT_CONFIG_PC (1 << 6)
#define EMC_STAT_CONFIG_PM (1 << 3)
#define EMC_STAT_CONFIG_32BIT (2 << 0)
#define EMC_STAT_CONFIG_16BIT (1 << 0)
#define EMC_STAT_CONFIG_8BIT (0 << 0)
/* Static Memory Delay Registers */
#define EMC_STAT_WAITWEN(n) (((n) - 1) & 0x0F)
#define EMC_STAT_WAITOEN(n) (((n) - 1) & 0x0F)
#define EMC_STAT_WAITRD(n) (((n) - 1) & 0x1F)
#define EMC_STAT_WAITPAGE(n) (((n) - 1) & 0x1F)
#define EMC_STAT_WAITWR(n) (((n) - 2) & 0x1F)
#define EMC_STAT_WAITTURN(n) (((n) - 1) & 0x0F)
/* EMC settings for DRAM */
struct emc_dram_settings {
u32 cmddelay;
u32 config0;
u32 rascas0;
u32 rdconfig;
u32 trp;
u32 tras;
u32 tsrex;
u32 twr;
u32 trc;
u32 trfc;
u32 txsr;
u32 trrd;
u32 tmrd;
u32 tcdlr;
u32 refresh;
u32 mode;
u32 emode;
};
#endif /* _LPC32XX_EMC_H */