u-boot/configs/imx93_11x11_evk_defconfig
Tom Rini 08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00

116 lines
2.8 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_IMX9=y
CONFIG_TEXT_BASE=0x80200000
CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x400000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
CONFIG_SPL_TEXT_BASE=0x2049A000
CONFIG_TARGET_IMX93_11X11_EVK=y
CONFIG_SYS_PROMPT="u-boot=> "
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_SYS_LOAD_ADDR=0x80400000
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_REMAKE_ELF=y
CONFIG_SYS_MONITOR_LEN=524288
CONFIG_DEFAULT_FDT_FILE="imx93-11x11-evk.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x2051e000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x2051ddd0
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000
CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2074
CONFIG_CMD_ERASEENV=y
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_RTC=y
CONFIG_CMD_TIME=y
CONFIG_CMD_GETTIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_HASH=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth0"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_IMX_RGPIO2P=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH_PHY=y
CONFIG_PHY_GIGE=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_IMX=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX93=y
CONFIG_DM_PMIC=y
CONFIG_SPL_DM_PMIC_PCA9450=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_RTC=y
CONFIG_RTC_EMULATION=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_ULP_WATCHDOG=y
CONFIG_LZO=y
CONFIG_BZIP2=y