u-boot/include/linux/mtd/nand_legacy.h
Wolfgang Denk 53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00

203 lines
5.8 KiB
C

/*
* linux/include/linux/mtd/nand.h
*
* Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
* Steven J. Hill <sjhill@cotw.com>
* Thomas Gleixner <gleixner@autronix.de>
*
* $Id: nand.h,v 1.7 2003/07/24 23:30:46 a0384864 Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Info:
* Contains standard defines and IDs for NAND flash devices
*
* Changelog:
* 01-31-2000 DMW Created
* 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers
* so it can be used by other NAND flash device
* drivers. I also changed the copyright since none
* of the original contents of this file are specific
* to DoC devices. David can whack me with a baseball
* bat later if I did something naughty.
* 10-11-2000 SJH Added private NAND flash structure for driver
* 10-24-2000 SJH Added prototype for 'nand_scan' function
* 10-29-2001 TG changed nand_chip structure to support
* hardwarespecific function for accessing control lines
* 02-21-2002 TG added support for different read/write adress and
* ready/busy line access function
* 02-26-2002 TG added chip_delay to nand_chip structure to optimize
* command delay times for different chips
* 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate
* defines in jffs2/wbuf.c
*/
#ifndef __LINUX_MTD_NAND_LEGACY_H
#define __LINUX_MTD_NAND_LEGACY_H
#ifndef CFG_NAND_LEGACY
#error This module is for the legacy NAND support
#endif
/*
* Standard NAND flash commands
*/
#define NAND_CMD_READ0 0
#define NAND_CMD_READ1 1
#define NAND_CMD_PAGEPROG 0x10
#define NAND_CMD_READOOB 0x50
#define NAND_CMD_ERASE1 0x60
#define NAND_CMD_STATUS 0x70
#define NAND_CMD_SEQIN 0x80
#define NAND_CMD_READID 0x90
#define NAND_CMD_ERASE2 0xd0
#define NAND_CMD_RESET 0xff
/*
* Enumeration for NAND flash chip state
*/
typedef enum {
FL_READY,
FL_READING,
FL_WRITING,
FL_ERASING,
FL_SYNCING
} nand_state_t;
/*
* NAND Private Flash Chip Data
*
* Structure overview:
*
* IO_ADDR - address to access the 8 I/O lines of the flash device
*
* hwcontrol - hardwarespecific function for accesing control-lines
*
* dev_ready - hardwarespecific function for accesing device ready/busy line
*
* chip_lock - spinlock used to protect access to this structure
*
* wq - wait queue to sleep on if a NAND operation is in progress
*
* state - give the current state of the NAND device
*
* page_shift - number of address bits in a page (column address bits)
*
* data_buf - data buffer passed to/from MTD user modules
*
* data_cache - data cache for redundant page access and shadow for
* ECC failure
*
* ecc_code_buf - used only for holding calculated or read ECCs for
* a page read or written when ECC is in use
*
* reserved - padding to make structure fall on word boundary if
* when ECC is in use
*/
struct Nand {
char floor, chip;
unsigned long curadr;
unsigned char curmode;
/* Also some erase/write/pipeline info when we get that far */
};
struct nand_chip {
int page_shift;
u_char *data_buf;
u_char *data_cache;
int cache_page;
u_char ecc_code_buf[6];
u_char reserved[2];
char ChipID; /* Type of DiskOnChip */
struct Nand *chips;
int chipshift;
char* chips_name;
unsigned long erasesize;
unsigned long mfr; /* Flash IDs - only one type of flash per device */
unsigned long id;
char* name;
int numchips;
char page256;
char pageadrlen;
unsigned long IO_ADDR; /* address to access the 8 I/O lines to the flash device */
unsigned long totlen;
uint oobblock; /* Size of OOB blocks (e.g. 512) */
uint oobsize; /* Amount of OOB data per block (e.g. 16) */
uint eccsize;
int bus16;
};
/*
* NAND Flash Manufacturer ID Codes
*/
#define NAND_MFR_TOSHIBA 0x98
#define NAND_MFR_SAMSUNG 0xec
/*
* NAND Flash Device ID Structure
*
* Structure overview:
*
* name - Complete name of device
*
* manufacture_id - manufacturer ID code of device.
*
* model_id - model ID code of device.
*
* chipshift - total number of address bits for the device which
* is used to calculate address offsets and the total
* number of bytes the device is capable of.
*
* page256 - denotes if flash device has 256 byte pages or not.
*
* pageadrlen - number of bytes minus one needed to hold the
* complete address into the flash array. Keep in
* mind that when a read or write is done to a
* specific address, the address is input serially
* 8 bits at a time. This structure member is used
* by the read/write routines as a loop index for
* shifting the address out 8 bits at a time.
*
* erasesize - size of an erase block in the flash device.
*/
struct nand_flash_dev {
char * name;
int manufacture_id;
int model_id;
int chipshift;
char page256;
char pageadrlen;
unsigned long erasesize;
int bus16;
};
/*
* Constants for oob configuration
*/
#define NAND_NOOB_ECCPOS0 0
#define NAND_NOOB_ECCPOS1 1
#define NAND_NOOB_ECCPOS2 2
#define NAND_NOOB_ECCPOS3 3
#define NAND_NOOB_ECCPOS4 6
#define NAND_NOOB_ECCPOS5 7
#define NAND_NOOB_BADBPOS -1
#define NAND_NOOB_ECCVPOS -1
#define NAND_JFFS2_OOB_ECCPOS0 0
#define NAND_JFFS2_OOB_ECCPOS1 1
#define NAND_JFFS2_OOB_ECCPOS2 2
#define NAND_JFFS2_OOB_ECCPOS3 3
#define NAND_JFFS2_OOB_ECCPOS4 6
#define NAND_JFFS2_OOB_ECCPOS5 7
#define NAND_JFFS2_OOB_BADBPOS 5
#define NAND_JFFS2_OOB_ECCVPOS 4
#define NAND_JFFS2_OOB8_FSDAPOS 6
#define NAND_JFFS2_OOB16_FSDAPOS 8
#define NAND_JFFS2_OOB8_FSDALEN 2
#define NAND_JFFS2_OOB16_FSDALEN 8
unsigned long nand_probe(unsigned long physadr);
#endif /* __LINUX_MTD_NAND_LEGACY_H */