u-boot/drivers/video/rockchip/Kconfig
Jagan Teki 9abece3985 video: rockchip: Support 4K resolution for rk3288, HDMI
Like, rk3399 the rk3288 also supports 4K resolution.

So, enable it for rk3288 with HDMI platforms.

Right now, rockchip video drivers are supporting for rk3288,
rk3399 SoC families, so mark the 4K resolution by default
if it's an HDMI video out.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:01 +08:00

72 lines
2.3 KiB
Text

#
# Video drivers selection for rockchip soc. These configs only impact the
# compile process. You can surely check all the options. In this case, all the
# display driver will be compiled, but which drivers finally will be used is
# decided by device tree configuration. What's more, enable needed power for
# display by configure the device tree, and the vop driver will do the rest.
#
# Author: Eric Gao <eric.gao@rock-chips.com>
#
menuconfig VIDEO_ROCKCHIP
bool "Enable Rockchip Video Support"
depends on DM_VIDEO
help
Rockchip SoCs provide video output capabilities for High-Definition
Multimedia Interface (HDMI), Low-voltage Differential Signalling
(LVDS), embedded DisplayPort (eDP) and Display Serial Interface (DSI).
This driver supports the on-chip video output device, and targets the
Rockchip RK3288 and RK3399.
config VIDEO_ROCKCHIP_MAX_XRES
int "Maximum horizontal resolution (for memory allocation purposes)"
depends on VIDEO_ROCKCHIP
default 3840 if DISPLAY_ROCKCHIP_HDMI
default 1920
help
The maximum horizontal resolution to support for the framebuffer.
This configuration is used for reserving/allocating memory for the
framebuffer during device-model binding/probing.
config VIDEO_ROCKCHIP_MAX_YRES
int "Maximum vertical resolution (for memory allocation purposes)"
depends on VIDEO_ROCKCHIP
default 2160 if DISPLAY_ROCKCHIP_HDMI
default 1080
help
The maximum vertical resolution to support for the framebuffer.
This configuration is used for reserving/allocating memory for the
framebuffer during device-model binding/probing.
if VIDEO_ROCKCHIP
config DISPLAY_ROCKCHIP_EDP
bool "EDP Port"
depends on VIDEO_ROCKCHIP
help
This enables Embedded DisplayPort(EDP) display support.
config DISPLAY_ROCKCHIP_LVDS
bool "LVDS Port"
depends on VIDEO_ROCKCHIP
help
This enables Low-voltage Differential Signaling(LVDS) display
support.
config DISPLAY_ROCKCHIP_HDMI
bool "HDMI port"
select VIDEO_DW_HDMI
depends on VIDEO_ROCKCHIP
help
This enables High-Definition Multimedia Interface display support.
config DISPLAY_ROCKCHIP_MIPI
bool "MIPI Port"
depends on VIDEO_ROCKCHIP
help
This enables Mobile Industry Processor Interface(MIPI) display
support. The mipi controller and dphy on rk3288& rk3399 support
16,18, 24 bits per pixel with up to 2k resolution ratio.
endif