mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
2852709676
Maintainers need to be notified more directly of the need to convert these drivers. Add a note to the top each affected file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
377 lines
7.4 KiB
C
377 lines
7.4 KiB
C
/*
|
|
* Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* NOTE: This driver should be converted to driver model before June 2017.
|
|
* Please see doc/driver-model/i2c-howto.txt for instructions.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
|
|
struct sh_i2c {
|
|
u8 iccr1;
|
|
u8 iccr2;
|
|
u8 icmr;
|
|
u8 icier;
|
|
u8 icsr;
|
|
u8 sar;
|
|
u8 icdrt;
|
|
u8 icdrr;
|
|
u8 nf2cyc;
|
|
u8 __pad0;
|
|
u8 __pad1;
|
|
};
|
|
|
|
static struct sh_i2c *base;
|
|
static u8 iccr1_cks, nf2cyc;
|
|
|
|
/* ICCR1 */
|
|
#define SH_I2C_ICCR1_ICE (1 << 7)
|
|
#define SH_I2C_ICCR1_RCVD (1 << 6)
|
|
#define SH_I2C_ICCR1_MST (1 << 5)
|
|
#define SH_I2C_ICCR1_TRS (1 << 4)
|
|
#define SH_I2C_ICCR1_MTRS \
|
|
(SH_I2C_ICCR1_MST | SH_I2C_ICCR1_TRS)
|
|
|
|
/* ICCR1 */
|
|
#define SH_I2C_ICCR2_BBSY (1 << 7)
|
|
#define SH_I2C_ICCR2_SCP (1 << 6)
|
|
#define SH_I2C_ICCR2_SDAO (1 << 5)
|
|
#define SH_I2C_ICCR2_SDAOP (1 << 4)
|
|
#define SH_I2C_ICCR2_SCLO (1 << 3)
|
|
#define SH_I2C_ICCR2_IICRST (1 << 1)
|
|
|
|
#define SH_I2C_ICIER_TIE (1 << 7)
|
|
#define SH_I2C_ICIER_TEIE (1 << 6)
|
|
#define SH_I2C_ICIER_RIE (1 << 5)
|
|
#define SH_I2C_ICIER_NAKIE (1 << 4)
|
|
#define SH_I2C_ICIER_STIE (1 << 3)
|
|
#define SH_I2C_ICIER_ACKE (1 << 2)
|
|
#define SH_I2C_ICIER_ACKBR (1 << 1)
|
|
#define SH_I2C_ICIER_ACKBT (1 << 0)
|
|
|
|
#define SH_I2C_ICSR_TDRE (1 << 7)
|
|
#define SH_I2C_ICSR_TEND (1 << 6)
|
|
#define SH_I2C_ICSR_RDRF (1 << 5)
|
|
#define SH_I2C_ICSR_NACKF (1 << 4)
|
|
#define SH_I2C_ICSR_STOP (1 << 3)
|
|
#define SH_I2C_ICSR_ALOVE (1 << 2)
|
|
#define SH_I2C_ICSR_AAS (1 << 1)
|
|
#define SH_I2C_ICSR_ADZ (1 << 0)
|
|
|
|
#define IRQ_WAIT 1000
|
|
|
|
static void sh_i2c_send_stop(struct sh_i2c *base)
|
|
{
|
|
clrbits_8(&base->iccr2, SH_I2C_ICCR2_BBSY | SH_I2C_ICCR2_SCP);
|
|
}
|
|
|
|
static int check_icsr_bits(struct sh_i2c *base, u8 bits)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IRQ_WAIT; i++) {
|
|
if (bits & readb(&base->icsr))
|
|
return 0;
|
|
udelay(10);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int check_stop(struct sh_i2c *base)
|
|
{
|
|
int ret = check_icsr_bits(base, SH_I2C_ICSR_STOP);
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int check_tend(struct sh_i2c *base, int stop)
|
|
{
|
|
int ret = check_icsr_bits(base, SH_I2C_ICSR_TEND);
|
|
|
|
if (stop) {
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
|
|
sh_i2c_send_stop(base);
|
|
}
|
|
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_TEND);
|
|
return ret;
|
|
}
|
|
|
|
static int check_tdre(struct sh_i2c *base)
|
|
{
|
|
return check_icsr_bits(base, SH_I2C_ICSR_TDRE);
|
|
}
|
|
|
|
static int check_rdrf(struct sh_i2c *base)
|
|
{
|
|
return check_icsr_bits(base, SH_I2C_ICSR_RDRF);
|
|
}
|
|
|
|
static int check_bbsy(struct sh_i2c *base)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0 ; i < IRQ_WAIT ; i++) {
|
|
if (!(SH_I2C_ICCR2_BBSY & readb(&base->iccr2)))
|
|
return 0;
|
|
udelay(10);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int check_ackbr(struct sh_i2c *base)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0 ; i < IRQ_WAIT ; i++) {
|
|
if (!(SH_I2C_ICIER_ACKBR & readb(&base->icier)))
|
|
return 0;
|
|
udelay(10);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void sh_i2c_reset(struct sh_i2c *base)
|
|
{
|
|
setbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST);
|
|
|
|
udelay(100);
|
|
|
|
clrbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST);
|
|
}
|
|
|
|
static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg)
|
|
{
|
|
if (check_bbsy(base)) {
|
|
puts("i2c bus busy\n");
|
|
goto fail;
|
|
}
|
|
|
|
setbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
|
|
clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY);
|
|
|
|
writeb((id << 1), &base->icdrt);
|
|
|
|
if (check_tend(base, 0)) {
|
|
puts("TEND check fail...\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (check_ackbr(base)) {
|
|
check_tend(base, 0);
|
|
sh_i2c_send_stop(base);
|
|
goto fail;
|
|
}
|
|
|
|
writeb(reg, &base->icdrt);
|
|
|
|
if (check_tdre(base)) {
|
|
puts("TDRE check fail...\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (check_tend(base, 0)) {
|
|
puts("TEND check fail...\n");
|
|
goto fail;
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 *val, int size)
|
|
{
|
|
int i;
|
|
|
|
if (i2c_set_addr(base, id, reg)) {
|
|
puts("Fail set slave address\n");
|
|
return 1;
|
|
}
|
|
|
|
for (i = 0; i < size; i++) {
|
|
writeb(val[i], &base->icdrt);
|
|
check_tdre(base);
|
|
}
|
|
|
|
check_tend(base, 1);
|
|
check_stop(base);
|
|
|
|
udelay(100);
|
|
|
|
clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
|
|
sh_i2c_reset(base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
|
|
{
|
|
u8 ret = 0;
|
|
|
|
if (i2c_set_addr(base, id, reg)) {
|
|
puts("Fail set slave address\n");
|
|
goto fail;
|
|
}
|
|
|
|
clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY);
|
|
writeb((id << 1) | 1, &base->icdrt);
|
|
|
|
if (check_tend(base, 0))
|
|
puts("TDRE check fail...\n");
|
|
|
|
clrsetbits_8(&base->iccr1, SH_I2C_ICCR1_TRS, SH_I2C_ICCR1_MST);
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
|
|
setbits_8(&base->icier, SH_I2C_ICIER_ACKBT);
|
|
setbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD);
|
|
|
|
/* read data (dummy) */
|
|
ret = readb(&base->icdrr);
|
|
|
|
if (check_rdrf(base)) {
|
|
puts("check RDRF error\n");
|
|
goto fail;
|
|
}
|
|
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
|
|
udelay(1000);
|
|
|
|
sh_i2c_send_stop(base);
|
|
|
|
if (check_stop(base)) {
|
|
puts("check STOP error\n");
|
|
goto fail;
|
|
}
|
|
|
|
clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
|
|
clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
|
|
|
|
/* data read */
|
|
ret = readb(&base->icdrr);
|
|
|
|
fail:
|
|
clrbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_I2C_MULTI_BUS
|
|
static unsigned int current_bus;
|
|
|
|
/**
|
|
* i2c_set_bus_num - change active I2C bus
|
|
* @bus: bus index, zero based
|
|
* @returns: 0 on success, non-0 on failure
|
|
*/
|
|
int i2c_set_bus_num(unsigned int bus)
|
|
{
|
|
switch (bus) {
|
|
case 0:
|
|
base = (void *)CONFIG_SH_I2C_BASE0;
|
|
break;
|
|
case 1:
|
|
base = (void *)CONFIG_SH_I2C_BASE1;
|
|
break;
|
|
default:
|
|
printf("Bad bus: %d\n", bus);
|
|
return -1;
|
|
}
|
|
|
|
current_bus = bus;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i2c_get_bus_num - returns index of active I2C bus
|
|
*/
|
|
unsigned int i2c_get_bus_num(void)
|
|
{
|
|
return current_bus;
|
|
}
|
|
#endif
|
|
|
|
void i2c_init(int speed, int slaveaddr)
|
|
{
|
|
#ifdef CONFIG_I2C_MULTI_BUS
|
|
current_bus = 0;
|
|
#endif
|
|
base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0;
|
|
|
|
if (speed == 400000)
|
|
iccr1_cks = 0x07;
|
|
else
|
|
iccr1_cks = 0x0F;
|
|
|
|
nf2cyc = 1;
|
|
|
|
/* Reset */
|
|
sh_i2c_reset(base);
|
|
|
|
/* ICE enable and set clock */
|
|
writeb(SH_I2C_ICCR1_ICE | iccr1_cks, &base->iccr1);
|
|
writeb(nf2cyc, &base->nf2cyc);
|
|
}
|
|
|
|
/*
|
|
* i2c_read: - Read multiple bytes from an i2c device
|
|
*
|
|
* The higher level routines take into account that this function is only
|
|
* called with len < page length of the device (see configuration file)
|
|
*
|
|
* @chip: address of the chip which is to be read
|
|
* @addr: i2c data address within the chip
|
|
* @alen: length of the i2c data address (1..2 bytes)
|
|
* @buffer: where to write the data
|
|
* @len: how much byte do we want to read
|
|
* @return: 0 in case of success
|
|
*/
|
|
int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
|
|
{
|
|
int i = 0;
|
|
for (i = 0; i < len; i++)
|
|
buffer[i] = i2c_raw_read(base, chip, addr + i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* i2c_write: - Write multiple bytes to an i2c device
|
|
*
|
|
* The higher level routines take into account that this function is only
|
|
* called with len < page length of the device (see configuration file)
|
|
*
|
|
* @chip: address of the chip which is to be written
|
|
* @addr: i2c data address within the chip
|
|
* @alen: length of the i2c data address (1..2 bytes)
|
|
* @buffer: where to find the data to be written
|
|
* @len: how much byte do we want to read
|
|
* @return: 0 in case of success
|
|
*/
|
|
int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len)
|
|
{
|
|
return i2c_raw_write(base, chip, addr, buffer, len);
|
|
}
|
|
|
|
/*
|
|
* i2c_probe: - Test if a chip answers for a given i2c address
|
|
*
|
|
* @chip: address of the chip which is searched for
|
|
* @return: 0 if a chip was found, -1 otherwhise
|
|
*/
|
|
int i2c_probe(u8 chip)
|
|
{
|
|
u8 byte;
|
|
return i2c_read(chip, 0, 0, &byte, 1);
|
|
}
|