u-boot/drivers/net/xilinx_ll_temac_mdio.c
Stephan Linz df48265036 net: ll_temac: Add LL TEMAC driver to u-boot
Xilinx LocalLink Tri-Mode Ether MAC driver can be
used by Xilinx Microblaze or Xilinx ppc405/440 in
SDMA and FIFO mode. DCR or XPS bus can be used.

The driver uses and requires MII and PHYLIB.

CP: 4 warnings: 'Use of volatile is usually wrong'
I won't fix this, because it depends on the network
driver subsystem.

Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Stephan Linz <linz@li-pro.net>
2012-04-04 09:36:19 -05:00

180 lines
4.8 KiB
C

/*
* Xilinx xps_ll_temac ethernet driver for u-boot
*
* MDIO bus access
*
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008 - 2011 PetaLogix
*
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
* March 2008 created
*
* CREDITS: tsec driver
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* [0]: http://www.xilinx.com/support/documentation
*
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
* [A]: [0]/application_notes/xapp1041.pdf
*/
#include <config.h>
#include <common.h>
#include <miiphy.h>
#include <phy.h>
#include <malloc.h>
#include <asm/io.h>
#include "xilinx_ll_temac.h"
#include "xilinx_ll_temac_mdio.h"
#if !defined(CONFIG_MII)
# error "LL_TEMAC requires MII -- missing CONFIG_MII"
#endif
#if !defined(CONFIG_PHYLIB)
# error "LL_TEMAC requires PHYLIB -- missing CONFIG_PHYLIB"
#endif
/*
* Prior to PHY access, the MDIO clock must be setup. This driver will set a
* safe default that should work with PLB bus speeds of up to 150 MHz and keep
* the MDIO clock below 2.5 MHz. If the user wishes faster access to the PHY
* then the clock divisor can be set to a different value by setting the
* correct bus speed value with CONFIG_XILINX_LL_TEMAC_CLK.
*/
#if !defined(CONFIG_XILINX_LL_TEMAC_CLK)
#define MDIO_CLOCK_DIV MC_CLKDIV_10(150000000)
#else
#define MDIO_CLOCK_DIV MC_CLKDIV_25(CONFIG_XILINX_LL_TEMAC_CLK)
#endif
static int ll_temac_mdio_setup(struct mii_dev *bus)
{
struct temac_reg *regs = (struct temac_reg *)bus->priv;
/* setup MDIO clock */
ll_temac_indirect_set(regs, TEMAC_MC,
MC_MDIOEN | (MDIO_CLOCK_DIV & MC_CLKDIV_MASK));
return 0;
}
/*
* Indirect MII PHY read via ll_temac.
*
* http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf
* page 67, Using the MII Management to Access PHY Registers
*/
int ll_temac_local_mdio_read(struct temac_reg *regs, int addr, int devad,
int regnum)
{
out_be32(&regs->lsw,
((addr << LSW_PHYAD_POS) & LSW_PHYAD_MASK) |
(regnum & LSW_REGAD_MASK));
out_be32(&regs->ctl, TEMAC_MIIMAI);
ll_temac_check_status(regs, RSE_MIIM_RR);
return in_be32(&regs->lsw) & LSW_REGDAT_MASK;
}
/*
* Indirect MII PHY write via ll_temac.
*
* http://www.xilinx.com/support/documentation/ip_documentation/xps_ll_temac.pdf
* page 67, Using the MII Management to Access PHY Registers
*/
void ll_temac_local_mdio_write(struct temac_reg *regs, int addr, int devad,
int regnum, u16 value)
{
out_be32(&regs->lsw, (value & LSW_REGDAT_MASK));
out_be32(&regs->ctl, CTL_WEN | TEMAC_MIIMWD);
out_be32(&regs->lsw,
((addr << LSW_PHYAD_POS) & LSW_PHYAD_MASK) |
(regnum & LSW_REGAD_MASK));
out_be32(&regs->ctl, CTL_WEN | TEMAC_MIIMAI);
ll_temac_check_status(regs, RSE_MIIM_WR);
}
int ll_temac_phy_read(struct mii_dev *bus, int addr, int devad, int regnum)
{
struct temac_reg *regs = (struct temac_reg *)bus->priv;
return ll_temac_local_mdio_read(regs, addr, devad, regnum);
}
int ll_temac_phy_write(struct mii_dev *bus, int addr, int devad, int regnum,
u16 value)
{
struct temac_reg *regs = (struct temac_reg *)bus->priv;
ll_temac_local_mdio_write(regs, addr, devad, regnum, value);
return 0;
}
/*
* Use MII register 1 (MII status register) to detect PHY
*
* A Mask used to verify certain PHY features (register content)
* in the PHY detection register:
* Auto-negotiation support, 10Mbps half/full duplex support
*/
#define PHY_DETECT_REG MII_BMSR
#define PHY_DETECT_MASK (BMSR_10FULL | BMSR_10HALF | BMSR_ANEGCAPABLE)
/* Looking for a valid PHY address */
int ll_temac_phy_addr(struct mii_dev *bus)
{
struct temac_reg *regs = (struct temac_reg *)bus->priv;
unsigned short val;
unsigned int phy;
for (phy = PHY_MAX_ADDR; phy >= 0; phy--) {
val = ll_temac_local_mdio_read(regs, phy, 0, PHY_DETECT_REG);
if ((val != 0xFFFF) &&
((val & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
return phy;
}
}
return -1;
}
int xilinx_ll_temac_mdio_initialize(bd_t *bis, struct ll_temac_mdio_info *info)
{
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate LL_TEMAC MDIO bus: %s\n",
info->name);
return -1;
}
bus->read = ll_temac_phy_read;
bus->write = ll_temac_phy_write;
bus->reset = NULL;
/* use given name or generate its own unique name */
if (info->name) {
strncpy(bus->name, info->name, MDIO_NAME_LEN);
} else {
snprintf(bus->name, MDIO_NAME_LEN, "lltemii.%p", info->regs);
info->name = bus->name;
}
bus->priv = info->regs;
ll_temac_mdio_setup(bus);
return mdio_register(bus);
}