mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
79d16e4540
Only some Soc need Schmitter feature, so move the implementation into their own files. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
635 lines
15 KiB
C
635 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <fdtdec.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
#define MAX_ROCKCHIP_PINS_ENTRIES 30
|
|
#define MAX_ROCKCHIP_GPIO_PER_BANK 32
|
|
#define RK_FUNC_GPIO 0
|
|
|
|
static int rockchip_verify_config(struct udevice *dev, u32 bank, u32 pin)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
|
|
if (bank >= ctrl->nr_banks) {
|
|
debug("pin conf bank %d >= nbanks %d\n", bank, ctrl->nr_banks);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pin >= MAX_ROCKCHIP_GPIO_PER_BANK) {
|
|
debug("pin conf pin %d >= %d\n", pin,
|
|
MAX_ROCKCHIP_GPIO_PER_BANK);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin,
|
|
int *reg, u8 *bit, int *mask)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
struct rockchip_mux_recalced_data *data;
|
|
int i;
|
|
|
|
for (i = 0; i < ctrl->niomux_recalced; i++) {
|
|
data = &ctrl->iomux_recalced[i];
|
|
if (data->num == bank->bank_num &&
|
|
data->pin == pin)
|
|
break;
|
|
}
|
|
|
|
if (i >= ctrl->niomux_recalced)
|
|
return;
|
|
|
|
*reg = data->reg;
|
|
*mask = data->mask;
|
|
*bit = data->bit;
|
|
}
|
|
|
|
bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin,
|
|
int mux, u32 *reg, u32 *value)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
struct rockchip_mux_route_data *data;
|
|
int i;
|
|
|
|
for (i = 0; i < ctrl->niomux_routes; i++) {
|
|
data = &ctrl->iomux_routes[i];
|
|
if (data->bank_num == bank->bank_num &&
|
|
data->pin == pin && data->func == mux)
|
|
break;
|
|
}
|
|
|
|
if (i >= ctrl->niomux_routes)
|
|
return false;
|
|
|
|
*reg = data->route_offset;
|
|
*value = data->route_val;
|
|
|
|
return true;
|
|
}
|
|
|
|
int rockchip_get_mux_data(int mux_type, int pin, u8 *bit, int *mask)
|
|
{
|
|
int offset = 0;
|
|
|
|
if (mux_type & IOMUX_WIDTH_4BIT) {
|
|
if ((pin % 8) >= 4)
|
|
offset = 0x4;
|
|
*bit = (pin % 4) * 4;
|
|
*mask = 0xf;
|
|
} else if (mux_type & IOMUX_WIDTH_3BIT) {
|
|
/*
|
|
* pin0 ~ pin4 are at first register, and
|
|
* pin5 ~ pin7 are at second register.
|
|
*/
|
|
if ((pin % 8) >= 5)
|
|
offset = 0x4;
|
|
*bit = (pin % 8 % 5) * 3;
|
|
*mask = 0x7;
|
|
} else {
|
|
*bit = (pin % 8) * 2;
|
|
*mask = 0x3;
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
unsigned int val;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
|
|
if (iomux_num > 3)
|
|
return -EINVAL;
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
|
|
debug("pin %d is unrouted\n", pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
|
|
return RK_FUNC_GPIO;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
if (bank->recalced_mask & BIT(pin))
|
|
rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask);
|
|
|
|
ret = regmap_read(regmap, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ((val >> bit) & mask);
|
|
}
|
|
|
|
static int rockchip_pinctrl_get_gpio_mux(struct udevice *dev, int banknum,
|
|
int index)
|
|
{ struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
|
|
return rockchip_get_mux(&ctrl->pin_banks[banknum], index);
|
|
}
|
|
|
|
static int rockchip_verify_mux(struct rockchip_pin_bank *bank,
|
|
int pin, int mux)
|
|
{
|
|
int iomux_num = (pin / 8);
|
|
|
|
if (iomux_num > 3)
|
|
return -EINVAL;
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
|
|
debug("pin %d is unrouted\n", pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) {
|
|
if (mux != IOMUX_GPIO_ONLY) {
|
|
debug("pin %d only supports a gpio mux\n", pin);
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set a new mux function for a pin.
|
|
*
|
|
* The register is divided into the upper and lower 16 bit. When changing
|
|
* a value, the previous register value is not read and changed. Instead
|
|
* it seems the changed bits are marked in the upper 16 bit, while the
|
|
* changed value gets set in the same offset in the lower 16 bit.
|
|
* All pin settings seem to be 2 bit wide in both the upper and lower
|
|
* parts.
|
|
* @bank: pin bank to change
|
|
* @pin: pin to change
|
|
* @mux: new mux function to set
|
|
*/
|
|
static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
int iomux_num = (pin / 8);
|
|
int ret;
|
|
|
|
ret = rockchip_verify_mux(bank, pin, mux);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
|
|
return 0;
|
|
|
|
debug("setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux);
|
|
|
|
if (!ctrl->set_mux)
|
|
return -ENOTSUPP;
|
|
|
|
ret = ctrl->set_mux(bank, pin, mux);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = {
|
|
{ 2, 4, 8, 12, -1, -1, -1, -1 },
|
|
{ 3, 6, 9, 12, -1, -1, -1, -1 },
|
|
{ 5, 10, 15, 20, -1, -1, -1, -1 },
|
|
{ 4, 6, 8, 10, 12, 14, 16, 18 },
|
|
{ 4, 7, 10, 13, 16, 19, 22, 26 }
|
|
};
|
|
|
|
int rockchip_translate_drive_value(int type, int strength)
|
|
{
|
|
int i, ret;
|
|
|
|
ret = -EINVAL;
|
|
for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[type]); i++) {
|
|
if (rockchip_perpin_drv_list[type][i] == strength) {
|
|
ret = i;
|
|
break;
|
|
} else if (rockchip_perpin_drv_list[type][i] < 0) {
|
|
ret = rockchip_perpin_drv_list[type][i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
|
|
int pin_num, int strength)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
|
|
debug("setting drive of GPIO%d-%d to %d\n", bank->bank_num,
|
|
pin_num, strength);
|
|
|
|
if (!ctrl->set_drive)
|
|
return -ENOTSUPP;
|
|
|
|
return ctrl->set_drive(bank, pin_num, strength);
|
|
}
|
|
|
|
static int rockchip_pull_list[PULL_TYPE_MAX][4] = {
|
|
{
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
PIN_CONFIG_BIAS_PULL_UP,
|
|
PIN_CONFIG_BIAS_PULL_DOWN,
|
|
PIN_CONFIG_BIAS_BUS_HOLD
|
|
},
|
|
{
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
PIN_CONFIG_BIAS_PULL_DOWN,
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
PIN_CONFIG_BIAS_PULL_UP
|
|
},
|
|
};
|
|
|
|
int rockchip_translate_pull_value(int type, int pull)
|
|
{
|
|
int i, ret;
|
|
|
|
ret = -EINVAL;
|
|
for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[type]);
|
|
i++) {
|
|
if (rockchip_pull_list[type][i] == pull) {
|
|
ret = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
|
|
debug("setting pull of GPIO%d-%d to %d\n", bank->bank_num,
|
|
pin_num, pull);
|
|
|
|
if (!ctrl->set_pull)
|
|
return -ENOTSUPP;
|
|
|
|
return ctrl->set_pull(bank, pin_num, pull);
|
|
}
|
|
|
|
static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
|
|
int pin_num, int enable)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
|
|
debug("setting input schmitt of GPIO%d-%d to %d\n", bank->bank_num,
|
|
pin_num, enable);
|
|
|
|
if (!ctrl->set_schmitt)
|
|
return -ENOTSUPP;
|
|
|
|
return ctrl->set_schmitt(bank, pin_num, enable);
|
|
}
|
|
|
|
/* set the pin config settings for a specified pin */
|
|
static int rockchip_pinconf_set(struct rockchip_pin_bank *bank,
|
|
u32 pin, u32 param, u32 arg)
|
|
{
|
|
int rc;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
rc = rockchip_set_pull(bank, pin, param);
|
|
if (rc)
|
|
return rc;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
rc = rockchip_set_drive_perpin(bank, pin, arg);
|
|
if (rc < 0)
|
|
return rc;
|
|
break;
|
|
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
rc = rockchip_set_schmitt(bank, pin, arg);
|
|
if (rc < 0)
|
|
return rc;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_param rockchip_conf_params[] = {
|
|
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
|
|
{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
|
|
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
|
|
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
|
|
{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
|
|
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
|
|
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
|
|
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
|
|
};
|
|
|
|
static int rockchip_pinconf_prop_name_to_param(const char *property,
|
|
u32 *default_value)
|
|
{
|
|
const struct pinconf_param *p, *end;
|
|
|
|
p = rockchip_conf_params;
|
|
end = p + sizeof(rockchip_conf_params) / sizeof(struct pinconf_param);
|
|
|
|
/* See if this pctldev supports this parameter */
|
|
for (; p < end; p++) {
|
|
if (!strcmp(property, p->property)) {
|
|
*default_value = p->default_value;
|
|
return p->param;
|
|
}
|
|
}
|
|
|
|
*default_value = 0;
|
|
return -EPERM;
|
|
}
|
|
|
|
static int rockchip_pinctrl_set_state(struct udevice *dev,
|
|
struct udevice *config)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
|
|
u32 cells[MAX_ROCKCHIP_PINS_ENTRIES * 4];
|
|
u32 bank, pin, mux, conf, arg, default_val;
|
|
int ret, count, i;
|
|
const char *prop_name;
|
|
const void *value;
|
|
int prop_len, param;
|
|
const u32 *data;
|
|
ofnode node;
|
|
#ifdef CONFIG_OF_LIVE
|
|
const struct device_node *np;
|
|
struct property *pp;
|
|
#else
|
|
int property_offset, pcfg_node;
|
|
const void *blob = gd->fdt_blob;
|
|
#endif
|
|
data = dev_read_prop(config, "rockchip,pins", &count);
|
|
if (count < 0) {
|
|
debug("%s: bad array size %d\n", __func__, count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
count /= sizeof(u32);
|
|
if (count > MAX_ROCKCHIP_PINS_ENTRIES * 4) {
|
|
debug("%s: unsupported pins array count %d\n",
|
|
__func__, count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < count; i++)
|
|
cells[i] = fdt32_to_cpu(data[i]);
|
|
|
|
for (i = 0; i < (count >> 2); i++) {
|
|
bank = cells[4 * i + 0];
|
|
pin = cells[4 * i + 1];
|
|
mux = cells[4 * i + 2];
|
|
conf = cells[4 * i + 3];
|
|
|
|
ret = rockchip_verify_config(dev, bank, pin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_set_mux(&ctrl->pin_banks[bank], pin, mux);
|
|
if (ret)
|
|
return ret;
|
|
|
|
node = ofnode_get_by_phandle(conf);
|
|
if (!ofnode_valid(node))
|
|
return -ENODEV;
|
|
#ifdef CONFIG_OF_LIVE
|
|
np = ofnode_to_np(node);
|
|
for (pp = np->properties; pp; pp = pp->next) {
|
|
prop_name = pp->name;
|
|
prop_len = pp->length;
|
|
value = pp->value;
|
|
#else
|
|
pcfg_node = ofnode_to_offset(node);
|
|
fdt_for_each_property_offset(property_offset, blob, pcfg_node) {
|
|
value = fdt_getprop_by_offset(blob, property_offset,
|
|
&prop_name, &prop_len);
|
|
if (!value)
|
|
return -ENOENT;
|
|
#endif
|
|
param = rockchip_pinconf_prop_name_to_param(prop_name,
|
|
&default_val);
|
|
if (param < 0)
|
|
break;
|
|
|
|
if (prop_len >= sizeof(fdt32_t))
|
|
arg = fdt32_to_cpu(*(fdt32_t *)value);
|
|
else
|
|
arg = default_val;
|
|
|
|
ret = rockchip_pinconf_set(&ctrl->pin_banks[bank], pin,
|
|
param, arg);
|
|
if (ret) {
|
|
debug("%s: rockchip_pinconf_set fail: %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct pinctrl_ops rockchip_pinctrl_ops = {
|
|
.set_state = rockchip_pinctrl_set_state,
|
|
.get_gpio_mux = rockchip_pinctrl_get_gpio_mux,
|
|
};
|
|
|
|
/* retrieve the soc specific data */
|
|
static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(struct udevice *dev)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct rockchip_pin_ctrl *ctrl =
|
|
(struct rockchip_pin_ctrl *)dev_get_driver_data(dev);
|
|
struct rockchip_pin_bank *bank;
|
|
int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j;
|
|
|
|
grf_offs = ctrl->grf_mux_offset;
|
|
pmu_offs = ctrl->pmu_mux_offset;
|
|
drv_pmu_offs = ctrl->pmu_drv_offset;
|
|
drv_grf_offs = ctrl->grf_drv_offset;
|
|
bank = ctrl->pin_banks;
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
int bank_pins = 0;
|
|
|
|
bank->priv = priv;
|
|
bank->pin_base = ctrl->nr_pins;
|
|
ctrl->nr_pins += bank->nr_pins;
|
|
|
|
/* calculate iomux and drv offsets */
|
|
for (j = 0; j < 4; j++) {
|
|
struct rockchip_iomux *iom = &bank->iomux[j];
|
|
struct rockchip_drv *drv = &bank->drv[j];
|
|
int inc;
|
|
|
|
if (bank_pins >= bank->nr_pins)
|
|
break;
|
|
|
|
/* preset iomux offset value, set new start value */
|
|
if (iom->offset >= 0) {
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
pmu_offs = iom->offset;
|
|
else
|
|
grf_offs = iom->offset;
|
|
} else { /* set current iomux offset */
|
|
iom->offset = (iom->type & IOMUX_SOURCE_PMU) ?
|
|
pmu_offs : grf_offs;
|
|
}
|
|
|
|
/* preset drv offset value, set new start value */
|
|
if (drv->offset >= 0) {
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
drv_pmu_offs = drv->offset;
|
|
else
|
|
drv_grf_offs = drv->offset;
|
|
} else { /* set current drv offset */
|
|
drv->offset = (iom->type & IOMUX_SOURCE_PMU) ?
|
|
drv_pmu_offs : drv_grf_offs;
|
|
}
|
|
|
|
debug("bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n",
|
|
i, j, iom->offset, drv->offset);
|
|
|
|
/*
|
|
* Increase offset according to iomux width.
|
|
* 4bit iomux'es are spread over two registers.
|
|
*/
|
|
inc = (iom->type & (IOMUX_WIDTH_4BIT |
|
|
IOMUX_WIDTH_3BIT)) ? 8 : 4;
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
pmu_offs += inc;
|
|
else
|
|
grf_offs += inc;
|
|
|
|
/*
|
|
* Increase offset according to drv width.
|
|
* 3bit drive-strenth'es are spread over two registers.
|
|
*/
|
|
if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) ||
|
|
(drv->drv_type == DRV_TYPE_IO_3V3_ONLY))
|
|
inc = 8;
|
|
else
|
|
inc = 4;
|
|
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
drv_pmu_offs += inc;
|
|
else
|
|
drv_grf_offs += inc;
|
|
|
|
bank_pins += 8;
|
|
}
|
|
|
|
/* calculate the per-bank recalced_mask */
|
|
for (j = 0; j < ctrl->niomux_recalced; j++) {
|
|
int pin = 0;
|
|
|
|
if (ctrl->iomux_recalced[j].num == bank->bank_num) {
|
|
pin = ctrl->iomux_recalced[j].pin;
|
|
bank->recalced_mask |= BIT(pin);
|
|
}
|
|
}
|
|
|
|
/* calculate the per-bank route_mask */
|
|
for (j = 0; j < ctrl->niomux_routes; j++) {
|
|
int pin = 0;
|
|
|
|
if (ctrl->iomux_routes[j].bank_num == bank->bank_num) {
|
|
pin = ctrl->iomux_routes[j].pin;
|
|
bank->route_mask |= BIT(pin);
|
|
}
|
|
}
|
|
}
|
|
|
|
return ctrl;
|
|
}
|
|
|
|
int rockchip_pinctrl_probe(struct udevice *dev)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct rockchip_pin_ctrl *ctrl;
|
|
struct udevice *syscon;
|
|
struct regmap *regmap;
|
|
int ret = 0;
|
|
|
|
/* get rockchip grf syscon phandle */
|
|
ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,grf",
|
|
&syscon);
|
|
if (ret) {
|
|
debug("unable to find rockchip,grf syscon device (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* get grf-reg base address */
|
|
regmap = syscon_get_regmap(syscon);
|
|
if (!regmap) {
|
|
debug("unable to find rockchip grf regmap\n");
|
|
return -ENODEV;
|
|
}
|
|
priv->regmap_base = regmap;
|
|
|
|
/* option: get pmu-reg base address */
|
|
ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pmu",
|
|
&syscon);
|
|
if (!ret) {
|
|
/* get pmugrf-reg base address */
|
|
regmap = syscon_get_regmap(syscon);
|
|
if (!regmap) {
|
|
debug("unable to find rockchip pmu regmap\n");
|
|
return -ENODEV;
|
|
}
|
|
priv->regmap_pmu = regmap;
|
|
}
|
|
|
|
ctrl = rockchip_pinctrl_get_soc_data(dev);
|
|
if (!ctrl) {
|
|
debug("driver data not available\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->ctrl = ctrl;
|
|
return 0;
|
|
}
|