mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
e020fb5ad2
This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove USB code that is on longer executed after enabling CONFIG_DM_USB. Enable CONFIG_PINCTRL, so we can get rid of ethernet pin configuration. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> |
||
|---|---|---|
| .. | ||
| board.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
How to use U-Boot on Grinn's liteBoard -------------------------------------- - Build U-Boot for liteBoard: $ make mrproper $ make liteboard_defconfig $ make This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card: sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - Jumper settings: S1: 0 1 0 1 1 1 where 0 means bottom position and 1 means top position (from the switch label numbers reference). - Insert the micro SD card in the board. - Connect USB cable between liteBoard and the PC for the power and console. - U-Boot messages should come up.